10% off on products from Windlass Steelcrafts

Silk ribbon, black, 8mm

€9.91*

Item is in field warehouse.

Product number: 16371
You get 10 bonus points for this order
Product information "Silk ribbon, black, 8mm"
Black silk ribbon, 8mm wide. Price per meter.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Manufacturerinformation (GPSR)

Haller Stahlwarenhaus GmbH
Am Gartennest 1
74544 Michelbach/Bilz

0791 47003
info@haller-stahlwaren.de

Customers also bought

Nuguigami - Cleaning paper
The Nuguigami is not just regular paper, it is high quality thick japanese paper for cleaning swords. It is used for wiping out old oil and wiping out the Uchiko. With this Nuguigami you get 2 sheets of paper which are sized 25x40 cm.

€14.90*

this item is in stock

Table Display Stand
This table display stand has been made of black lacquered wood and is suitable for one sword. details: Height: 57,5 cm Depth: 16,5 cm Width: 31,5 cm

€25.90*

this item is in stock

Hanwei Sword Oil
CAS/Hanwei Sword Oil is specially formulated to provide corrosion protection for high-carbon steel blades and other edged weapons. Contains Petroleum Distillates. You will receive a bottle containing 4 oz of sword oil.

€8.90*

Dieser Artikel hat eine Lieferfrist von ca. 4-6 Wochen.

Maintenance Kit
The Sword Maintenance Kit comes in a lightweight wooden storage box and includes all the essential tools needed for regular blade maintenance. The Uchiko powder ball contains fine polishing powder and is gently tapped along the blade to loosen old oil and surface impurities. The residue is then removed with the included soft microfiber cloth. Finally, apply a thin layer of clove oil to protect the blade against rust and corrosion. Regular maintenance helps prevent fingerprints, moisture damage, and other stains that can permanently affect the blade's finish. This maintenance kit is an essential accessory for collectors, Iaido practitioners, and sword enthusiasts alike. Clove Oil (Tsubaki or Clove Oil) The oil protects the blade from rust by forming a thin protective barrier against humidity and moisture in the air. As the protective film gradually evaporates over time, it is recommended to reapply the oil at least once a month. Uchiko Powder Ball The Uchiko powder ball contains fine polishing powder. By gently tapping both sides of the blade, it loosens old oil, fingerprints, and fine contaminants. When used together with the microfiber cloth, it helps restore a clean and polished blade surface. Microfiber Cloth The soft microfiber cloth is used to remove the Uchiko powder, oil residue, fingerprints, and other contaminants from the blade. It is also ideal for applying a thin, even coat of maintenance oil across the entire blade. Brass Mekugi Remover (Mekuginuki) The brass Mekuginuki is used to remove the bamboo retaining pins (Mekugi) from the sword handle, allowing the sword to be safely disassembled for maintenance. The brass hammer head can be unscrewed from the handle for use. Sword Maintenance InstructionsClean and maintain your sword after every use, whether it has been used for Iaido practice, Tameshigiri, or is simply displayed as part of your collection. 1. Remove Old Oil Use the microfiber cloth to wipe the blade thoroughly from the tip toward the handle, removing old oil and light surface contamination. 2. Apply Uchiko Powder Gently tap both sides of the blade with the Uchiko powder ball. The fine polishing powder helps lift old oil and dirt from the blade's surface. 3. Wipe the Blade Clean Carefully wipe away all Uchiko powder using the microfiber cloth. Repeat the process if necessary until the blade is completely clean. 4. Apply Fresh Oil Apply a small amount of clove oil to the microfiber cloth and spread it evenly over both sides of the blade, working from the tip toward the handle. Only a very thin protective film should remain on the blade. 5. Regular Maintenance Every 3–4 months, it is recommended to disassemble the sword and clean the tang (Nakago) in the same manner before applying a light coat of oil.

€22.90*

this item is in stock

Windlass Practical Rapier
A practical rapier from the Windlass forge. The blade is made of 1095 spring steel and has a full-length tang. The handle is wrapped in wire, the bell guard and the pommel are made of steel. The sheath is made of wood and has a leather coating. Blade length 97cm Total length 104 cm Weight 950 g Weight with sheath 1150 g

From €399.00*

Im Außenlager - in 5-7 Tagen bei Dir zu Hause

Roman Sword with sheath
Elaborately decorated Gladius Sword Type Mainz. The blade is made from 420 stainless steel. Handle and sheath are made from plastic in wood design. Additionally the sheath has a jewelery chain, which is not suitable for carrying. Details: Overall length: approx. 79 cm Blade length: approx. 56 cm Blade Material: 420 Satinless Steel Handle Material: Plastic with wooden design

€75.90*

Im Außenlager - in 5-7 Tagen bei Dir zu Hause

Tsuka ito for Katana from silk 10 mm 2 colors
This is two colored silk cord for wrapping japanese tsuka. 10mm wrapping is appropriate for Katana. Please choose the color and write your choice into the remark box. Following colors are available : gold-black black-gold This item stands for 1 meter of tsuka ito. For the length just put this article several times into your shopping cart. If you want to order 7 meters of this tsuka ito then just put the item 7 times into your shopping card. Of course you will get the tsuka ito in one piece if you order more than 1m.

€14.90*

this item is in stock

Metal Glo One Tube
Premium quality polishing paste, perfect for cleaning and polishing any metal surface. Can be used to polish stainless and carbon steel blades, brass, gold, silver, chrome, copper and many other hard surfaces. Packaged on an eye-catching color blister card. Details: Content: approx. 40 g Manufacturer: United Cutlery

€12.90*

this item is in stock