Citadel

A compact, sturdy pocketknife. The blade is forged from N690Co stainless steel with a Rockwell hardness of 58-60°. For an extra gently and smooth action the blade is mounted with washers made of berrylium bronze and features a checkered thumb stud for a safe handling. The handle is made of troyeng wood, a contrasty grained ebony. The frame made of Z40C13 steel features a lanyard hole. The blade locks via liner lock. Details: Blade Length: approx. 7.5 cm Blade Material: N690Co steel Handle Material: Troyeng wood

€191.75* €217.90* (12% saved)

this item is in stock

Citadel

Citadel Saigon Rayskin

Pocket Knife Citadel Saigon Rayskin. The handle is made from wooden scales covered with blackend rayskin. The blade is hand-forged (rust resistant) from T508 steel with a hardness of approx. 58 ° Rockwell. Both handle and blade back are elaborately decorated with an engraving. The blade locks with a liner lock. Supplied in a soft case. Details: Blade length: approx. 6 cm Blade material: T508 Steel Handle Material: Wodden scales with blackened rayskin

€277.90*

Item is normally available in about 3-4 weeks.

Citadel

Citadel Saigon Bone

Pocket Knife Citadel Saigon Bone. The handle is made from bone. The blade is hand-forged (rust resistant) from T508 steel with a hardness of approx. 58 ° Rockwell. Both handle and blade back are elaborately decorated with an engraving. The blade locks with a liner lock. Supplied in a soft case. Details: Blade length: approx. 6 cm Blade material: T508 Steel Handle Material: Bone

€207.90*

item is available on 06.06.2024 . preorder now

Citadel

Citadel Knife Trondheim

Citadel Trondheim. The blade is hand forged from DNH7 carbon steel (not stainless) and differentiated hardened. The blade has a hardness of approx. 60 ° Rockwell, the back approx. 44 °. The handle is made of rosewood. With high-quality, handmade leather sheath. Details: Overall length: approx. 15 cm Blade length: approx. 7 cm Blade material: DNH7 Carbon Steel Handle Material: Rosewood

€158.01*

Item is normally available in about 4-6 weeks.

Citadel

Citadel Pocketknife Aizto big

Citadel Aizto Big. The blade is hand-forged (not stainless) from DNH7 carbon steel. Forging tracks and a fine decorated back underline the simple but noble design. The blade is hardened differentiated. Thus, the cutting edge has a hardness of approx. 60 ° Rockwell, the back has a hardness of approx. 44 °. The handle is made from a single piece of horn which has been elaborately bent and shaped. As former common, the blade has no lock. Details: Blade length: approx. 9 cm Blade material: Carbon steel DNH7 Handle Material: Horn

€117.90*

item is available on 06.06.2024 . preorder now

Citadel

Coubi Horn

The Coubi is the smallest of Citadel’s pocket knives.The blade is hand forged from N690Co stainless steel and has an HRC of 58-60. Its base is finely decorated. The handle scales are made of beautiful horn. The blade is locked using a linerlock. Blade length 2.2’’

€187.90*

item is available on 06.06.2024 . preorder now

Citadel

Rithy

A small and handy outdoor knife. The blade is made of DNH7 carbon steel (not stainless steel) and is differentially hardened. The edge has a HRC of 60°, the spine a HRC of 44°. The handle scales are made of Padouk wood with elegant horn bolsters. At the handle end you can find a safety strap. A high-quality, handmade leather sheath is included. Blade length 2.6’’ Total length 6’’

€137.90*

Item is normally available in about 3-4 weeks.

Citadel

Citadel Pocketknife Giaponino

Citadel Giaponino. The blade is made from hand-forged N690Co Stainless steel, the handle scales are made from rosewood. Details: Blade length: approx. 6 cm Blade material: N690Co Stainless Steel Handle Material: Rosewood

€171.90*

Item is in field warehouse.

Citadel

Mushroom Knife

Limited to 50 unitsDon't judge this knife by its size. What it lacks in dimensions it makes up for in sharpness and finesse. Incredibly smooth and sharp, the plethora of uses for this knife is limited only by your capabilities and imagination. Cutting, pruning, and slicing are done with ease with just a few fingers. Its cute, small and sharp as it looks.The high carbon steel blade is hand forged from imported DNH7 steel and differentially hardened in the Japanese style. This hardening process creates a hard, durable edge and a softer more resilient spine and tang. The blade is sharpened to a full convex profile which greatly increases the durability of the hardened edge.A full grain leather belt sheath is included with a unique belt loop that allows vertical and horizontal (scout) carry. As DNH7 is a high-carbon steel the knife should not be stored in the leather for a long period of time; a nylon zipper storage pouch is included for long-term storage instead. SPECIFICATIONS Overall: 5 1/4" Blade Length: 2 3/4" Handle Length: 2 1/2" Weight: 1.7oz Width at Guard: 5/8" Thickness at Guard: 2.5mm Specs will vary slightly from piece to piece.

€259.00*

Item is in field warehouse, long distance shipping.

Citadel

Citadel Bamboo Katana

Symbolic of the straight growth of the bamboo, the Citadel Katana Bamboo has a small blade deflection. Handle end (Kashira) and handle clamp (Fuchi) are made of iron, covered with a simple but elegant, high-gloss black varnish. Also made from iron is the tsuba, which is not casted but made by hand. It shows like the butt cap and the grip clamp finely engraved bamboo themes. Decorations (Menuki) of silvered bronze offer a nice contrast to the dark handle wrap (Tsuka-Maki) and emphasize the graceful whole. Blade in Shinogi Zukuri style with fuller (Bo-Hi) on the blades back. Forged integral Habaki made of silvered and engraved copper. Seppa made from silvered brass. Handle wrapped in black, Japanese silk in classic Hineri-Maki style. Black, high-polish sheath (Kuroro style). The razor sharp blades are made of 1075 carbon steel. Under traditional clay coating differentiated hardened to approx. 60 HRC at the cutting edge and approx. 40 HRC at the back of the blade. By the skills of the polisher the masterly work of the blacksmith comes fully to bear. A mirror-polished surface, as well as a clearly recognizable temper line (hamon) are the result. To every sword belongs a high-quality sword bag, and a padded Cordura bag for transport next to a production certificate. Details: Overall length: approx. 100 cm Blade length: approx. 71.5 cm Handle length: approx. 28 cm Blade Material: 1075 carbon steel Weight (without sheath): approx. 1200 g

€2,597.90*

item is available on 06.06.2024 . preorder now

Citadel

Jabali - Rosewood

Limited to 50 unitsThe Jabali fixed blade by Citadel will become your favorite camp or utility knife. The finger cutout and notched spine allows you to choke up on the blade for detailed cutting. Its heafty enough for light chopping duties but not so heavy that you tire your hand. Emensely comfortable to grip and perfectly balanced. This knife will be your go-to knife on your hip.The high carbon steel blade is hand forged from imported DNH7 steel and differentially hardened in the Japanese style. This hardening process creates a hard, durable edge and a softer more resilient spine and tang. The blade is sharpened to a full convex profile which greatly increases the durability of the hardened edge.A full grain leather belt sheath is included. As DNH7 is a high-carbon steel the knife should not be stored in the leather sheath for a long period of time; a nylon zipper storage pouch is included for long-term storage instead. SPECIFICATIONS Overall: 12" Blade Length: 7 1/8" Handle Length: 4 7/8" Weight: 10.7oz Width at Guard: 1 3/8" Thickness at Guard: 4.1mm Specs will vary slightly from piece to piece.

€349.00*

Item is in field warehouse, long distance shipping.

Citadel

Citadel Pocketknife Aizto medium

Citadel Aizto Medium. The blade is hand-forged (not stainless) from DNH7 carbon steel. Forging tracks and a fine decorated back underline the simple but noble design. The blade is hardened differentiated. Thus, the cutting edge has a hardness of approx. 60 ° Rockwell, the back has a hardness of approx. 44 °. The handle is made from a single piece of horn which has been elaborately bent and shaped. As former common, the blade has no lock. Details: Blade length: approx. 8 cm Blade material: Carbon steel DNH7 Handle Material: Horn

€109.00*

item is available on 06.06.2024 . preorder now

Citadel

Kampot Troyeng

An elegant pocket knife with decorated handle back. The blade is made of N690Co stainless steel with a hardness of 58-60 ° Rockwell. It is mounted with beryllium bronze washers for a particularly gentle and soft gait and has a grooved thumb rest for a secure hand position at the transition to the handle. The handle scales are made of Troyeng wood, a high-contrast grained ebony. The handle frame made of Z40C13 steel is extended at the rear end with an eyelet for a lanyard. The blade is locked using a liner lock. Blade length 80 mm

€197.90*

Item is normally available in about 3-4 weeks.

Citadel

Treychongva Hunting Knife - Buffalo Horn

Another excellent, handmade fixed blade from Citadel featuring N690Co Böhler steel blade fully tempered and ready for use. The rough buffalo horn handle is adorned with red liners and nickel/silver pegs. Light, sharp and nimble in your hand. A full grain leather belt sheath is included.Limited to 50 pieces. Specifications Overall: 6 3/4" Blade Length: 2 7/8" Handle Length: 3 3/8" Weight: 3.3 oz Thickness at Guard: 3.4mm Thickness at Tip: 1mm Blade Steel: N690Co-Böhler Handle Material: Buffalo Horn Specs will vary slightly from piece to piece.

€279.00*

Item is normally available in about 4-6 weeks.

Citadel

Ocean Citadel Katana - Limited Edition I

Citadel's swords and knives are completely hand-made one off customs made entirely in their small shop in Phnom Penh, Cambodia. We've asked them to make for us a few in the same style, but made in the same way as their custom swords. Crafted individually from start to finish, each one is of course a bit unique in it's own way. Limited to 100 swords, each is signed by the smith on the nakago with the sword number and comes with a matching certificate.This is an extremely well balanced sword in an ocean theme, with a nami or wave tsuba and turbulent water fuchi and kashira. The blade is hand forged and differentially hardened DNH7 high carbon steel. Each blade is hand polished using traditional stones and powders to produce an authentic look. This sword features a full length bo-hi or fuller to lighten and balance the blade. The hi continues through the habaki and into the nakago, with the copper habaki forged to follow the hi.The tsuka is carved to each individual sword ensuring a tight friction fit with a full same-gawa wrap. The ito or handle wrapping is natural white silk imported from Japan, the ito is dyed with tea to give it a slight tan color that will darken a bit with use. The saya is lacquered in a deep midnight blue with a same-gawa or sting ray skin wrap. Each saya is carved for the individual sword ensuring a proper snug fit.A weapon of war foremost, new individual details in this sword present themselves with each viewing.Collect the set; a samurai wore two swords, the matching side arm, known as Wakizashi, is also available to complete your collection. Key Features: DNH7 High Carbon Steel Completely Hand-Made Limited Edition of 100 Details: SPECIFICATIONS Overall: 40" Blade Length: 28" Handle Length: 11" Weight: 2lb 3oz Point of Balance: 5 1/2" Thickness at Guard: .26" Thickness at Tip: .2" Sori: 5/8" Blade Steel: DNH7

€3,239.00*

Item is normally available in about 4-6 weeks.

Citadel

Lotus Wakizashi

Citadel's swords and knives are completely hand-made one off customs made entirely in their small shop in Phnom Penh, Cambodia. We've asked them to make for us a few in the same style, but made in the same way as their custom swords. Crafted individually from start to finish, each one is of course a bit unique in it's own way. Limited to just 20 swords, each is signed by the smith on the nakago with the sword number and comes with a matching certificate.The "Wakizashi" or Short Sword was worn with the longer katana, when the pair matched in theme they were considered a Daisho. However, when the katana was surrendered upon entering a home the wakizashi was not, making it truly the side-arm of the Samurai! The fittings are hand cut and shaped from pure iron, an extremely tough material that takes a deep black patina and needs minimal maintenance. Iron will bend under tremendous shock instead of break, a feature any samurai would appreciate. The Lotus design of the tsuba is in an older, simpler style (kyo sukashi, maru gata) that reflects the nature of the sword.The tsuka or handle and scabbard are hand carved to fit each individual sword ensuring a proper fit. The it or handle wrap is of black natural silk imported from Japan. It is tightly wrapped around the full same-gawa or ray skin wrap with the proper hishigami or paper triangles present to ensure a long life of use. The saya is lacquered to a semi-gloss finish with buffalo horn mounts (koiguchi, kurikata and kojiri).These are extremely limited in numbers to be produced (20 only!). Each blade is signed on the tang with the model and number and includes a stamped certificate of authenticity.These swords are entirely hand-made by Citadel.Collect the set; a samurai wore two swords; the matching long sword, Katana, is also available to complete your collection. Key Features: Limited Edition (20 only!) Hand Forged Blade Made for Cutting Practice SPECIFICATIONS Overall: 29 1/2" Blade Length: 21 1/4" Weight: 1lb 9oz Blade Steel: DNH7 Specs will vary slightly from piece to piece.

€2,299.00*

Item is normally available in about 4-6 weeks.

Citadel

Citadel Knife Vannak small

Citadel Vannak small. The blade is hand forged from DNH7 carbon steel (not stainless). The handle is made of rosewood with decorative inlays. The handle end and the guard are made from stainless steel. With high-quality, handmade leather sheath. Details: Overall length: approx. 19 cm Blade length: approx. 8.5 cm Blade material: DNH7 Carbon Steel Handle Material: Rosewood

€257.90*

Item is in field warehouse.

Citadel

Vannak V Utility Knife

The high carbon steel Vannak V is a handy fixed blade knife, small enough for delicate work with an edge and shape that also lends itself to hard work when needed. The blade is hand forged from high carbon DNH7 and differentially hardened showing a distinct temper line or hamon. The forge scale on the flats is left in place while the primary bevel is highly polished. The full convex edge is shaving sharp and likes to stay that way. A full grain leather belt sheath is included. As DNH7 is a high-carbon steel the knife should not be stored in the leather sheath for a long period of time; a nylon zipper storage pouch with embroidered Citadel logo is included for long-term storage instead. Specifications Overall: 5 3/4" Blade Length: 2 3/8" Handle Length: 3 1/8" Weight: 3.4oz Blade Steel: DNH7 Handle Material: Palisander Specs will vary slightly from piece to piece.

€249.00*

Item is in field warehouse, long distance shipping.

Citadel

Citadel Yushu Katana

The name of Yushu (engl. "perfection") carries this sword to right. The lots of details make it a work of art of the highest class. Handle end (Kashira) and handle clamp (Fuchi) are made of iron, covered with simple, but elegant, high-gloss black varnish. Also made from iron is the tsuba, which is not casted but made by hand. It shows a Japanese temple with Cherry blossom (Sakura no Hana) in the foreground. Decorations (Menuki) of silvered bronze offer a nice contrast to the dark handle wrap (Tsuka-Maki) and emphasize the graceful whole. Blade in Shinogi Zukuri style with fuller (Bo-Hi). Forged integral Habaki made of silvered and engraved copper. Seppa made from silvered brass. Handle wrapped in black, Japanese silk in Katate-Maki style. Black, high-polish sheath with incorporated ray skin (Same Kuroro style). The razor sharp blades are made of 1075 carbon steel. Under traditional clay coating differentiated hardened to approx. 60 HRC at the cutting edge and approx. 40 HRC at the back of the blade. By the skills of the polisher the masterly work of the blacksmith comes fully to bear. A mirror-polished surface, as well as a clearly recognizable temper line (hamon) are the result. To every sword belongs a high-quality sword bag, and a padded Cordura bag for transport next to a production certificate. Details: Overall length: approx. 102.5 cm Blade length: approx. 74 cm Handle length: approx. 28.5 cm Blade Material: 1075 carbon steel Weight (without sheath): approx. 1050 g

€3,499.00*

Item is normally available in about 3-4 weeks.

Citadel

Citadel Knife Baltic II

Citadel Baltic II. The blade is hand forged from DNH7 carbon steel (not stainless) and differentiated hardened. The blade has a hardness of approx. 60 ° Rockwell, the back approx. 44 °. The handle is made of rosewood. With high-quality, handmade leather sheath. Details: Overall length: approx. 23.5 cm Blade length: approx. 11 cm Blade material: DNH7 Carbon Steel Handle Material: Rosewood

€247.90*

Item is in field warehouse.

Citadel

Ocean Wakizashi

Citadel's swords and knives are completely hand-made one off customs made entirely in their small shop in Phnom Penh, Cambodia. We've asked them to make for us a few in the same style, but made in the same way as their custom swords. Crafted individually from start to finish, each one is of course a bit unique in it's own way. Limited to 20 swords, each is signed by the smith on the nakago with the sword number and comes with a matching certificate.The "Wakizashi" or Short Sword was worn with the longer katana, when the pair matched in theme they were considered a Daisho. However, when the katana was surrendered upon entering a home the wakizashi was not, making it truly the side-arm of the Samurai! This sword features an ocean theme, with a nami or wave tsuba and turbulent water fuchi and kashira. The blade is hand forged and differentially hardened DNH7 high carbon steel. Each blade is hand polished using traditional stones and powders to produce an authentic look. This sword features a full length bo-hi or fuller to lighten and balance the blade. The hi continues through the habaki and into the nakago, with the copper habaki forged to follow the hi.The tsuka is carved to each individual sword ensuring a tight friction fit with a full same-gawa wrap. The ito or handle wrapping is natural white silk imported from Japan, the ito is dyed with tea to give it a slight tan color that will darken a bit with use. The saya is lacquered in a deep midnight blue with a same-gawa or sting ray skin wrap. Each saya is carved for the individual sword ensuring a proper snug fit.These are extremely limited in numbers to be produced (20 only!). Each blade is signed on the tang with the model and number and includes a stamped certificate of authenticity.These swords are entirely hand-made by Citadel.Collect the set; a samurai wore two swords, the matching long sword (Katana) is also available to complete your collection. Key Features: Limited Edition (20 only) Hand Forged Blade Hand Carved Pure Iron Fittings SPECIFICATIONS Overall: 29 1/2" Blade Length: 21 1/4" Weight: 1lb 7oz Blade Steel: DNH7 Specs will vary slightly from piece to piece.

€2,699.03*

Item is normally available in about 4-6 weeks.

Citadel

Dagger TTY

This double edged sleek and deadly beauty embodies function and versatility. Whether you tie it to the end of a staff to use it as a boar hunting knife or simply draw it to euthanize your prey, the TTY Dagger will perform efficiently. The 7 ½” hand forged and differentially hardened DNH7 features a sloping central ridge that tapers to both edges. Forge scale has been left on the flats of the blade but the rest is mirror polished. The blade blends elegantly with the stainless guard and leather spacer with the smooth polished ebony handle which is secured with a brass pin. A full grain leather belt sheath is included featuring Citadel's unique bone button and loop fastener. This system securely holds the knife in place but can be broken easily enough in the event the knife needs to be removed quickly for an emergency. Specifications Overall: 13 1/2" Blade Length: 7 /12" Handle Length: 5" Weight: 10.2 oz Thickness at Guard: 7mm Blade Steel: DNH7 Handle Material: Palisander Specs will vary slightly from piece to piece.

€399.00*

Item is in field warehouse, long distance shipping.

Citadel

Phan Thiet Friction

Friction Folders have been gaining popularity over the years for their unique style, simplicity and function. With no lock present simply keep your thumb on the hand forged tang extension to keep the knife from closing. In addition the pivot is made tight to keep the blade from closing quickly on your fingers. And you will want your fingers away from this edge! The hand forged DNH7 blade is differentially hardened and provided exceedingly sharp. A padded nylon case with Citadel logo is included. Specifications Overall: 7" Blade Length: 3" Handle Length: 4" Weight: 3oz Thickness at Guard: 4mm Blade Steel: DNH7 Specs will vary slightly from piece to piece.

€169.00*

Item is in field warehouse, long distance shipping.

Citadel

Citadel Chef´s Knife Sashimi

Citadel Chef´s Knife Sashimi. Hand-forged kitchen knife of the highest quality from Citadel. The blade is made of DNH7 carbon steel. With a carbon content of 0.75%. As with leisure knives from the workshops of Citadel this chef´s knife blade is hardened differentiated. The blade has a HRC of approx. 60 ° and the blade back has a HRC of approx. 45 °. The handle is made of rosewood. The chestnut-section of the handle provides a secure and ergonomic grip. Includes a high-quality sheath of Cordura. Details: Overall length: approx. 35 cm Blade length: approx. 22 cm Blade material: Carbon steel DNH7 Handle Material: Rosewood Weight: approx. 170 g

€227.90*

Item is in field warehouse.

Citadel

Phan Thiet Horn

The blade is hand-forged from DNH7 carbon steel. The pin, which cannot be locked, is opened using the pinball machine. The handle scales are made of horn. Blade length 75 mm

€133.90*

item is available on 06.06.2024 . preorder now

Citadel

Citadel Saigon Bone

Pocket Knife Citadel Saigon. The blade is hand-forged (rust resistant) from T508 steel with a hardness of approx. 58 ° Rockwell. Both handle and blade back are elaborately decorated with an engraving. The handle is made from rosewood. The blade locks with a liner lock. Details: Blade length: approx. 6 cm Blade material: T508 Steel Handle Material: Rosewood

€191.90*

Item is normally available in about 3-4 weeks.

Citadel

Treychongva Hunting Knife - Bone

Another excellent, handmade fixed blade from Citadel featuring N690Co Böhler steel blade fully tempered and ready for use. The smooth bone handle is adorned with red liners and nickel/silver pegs. Light, sharp and nimble in your hand. A full grain leather belt sheath is included.Limited to 50 pieces. Specifications Overall: 6 3/4" Blade Length: 2 7/8" Handle Length: 3 3/8" Weight: 3.3 oz Thickness at Guard: 3.4mm Thickness at Tip: 1mm Blade Steel: N690Co-Böhler Handle Material: Bone Specs will vary slightly from piece to piece.

€299.00*

Item is in field warehouse, long distance shipping.

Citadel

Trident - Forged

The Trident pattern lends itself well to this collectible pocket knife featuring a hand forged blade and stabilzied spalted wood scales. The high carbon blade (DNH7 from Austria) is hand forged and differentially hardened in the Japanese style by the skilled smiths at Citadel. The bevel is highly polished and zero ground (no secondary bevel) creating a long lasting and extremely sharp edge. The flats are untouched after the forging, displaying the brut de forge scaling left by the blacksmith's hammer blows. The Trident boasts exceptional stabilized spalted handle scales making each one unique. The large handle fills the hand nicely without taking up a lot of pocket room. Hand carved detail work on the spine and back spacer complete this collectible package. A padded nylon case with an embroidered Citadel logo is included. Specifications: Overall: 8" Blade Length: 3 1/4" Handle Length: 4 1/2" Weight: 4.5oz Blade Steel: DNH7 Specs will vary slightly from piece to piece.

€329.00*

Item is in field warehouse, long distance shipping.

Citadel

Citadel Knife Trapper

Citadel Trapper. The blade is hand forged from DNH7 carbon steel (not stainless) and differentiated hardened. The blade has a hardness of approx. 60 ° Rockwell, the back approx. 44 °. The handle is made of rosewood, the guard is made from stainless steel. With high-quality, handmade leather sheath. Details: Overall length: approx. 25 cm Blade length: approx. 13 cm Blade material: DNH7 Carbon Steel Handle Material: Rosewood

€323.90*

Item is in field warehouse.

Citadel

Lotus Citadel Katana - Limited Edition II

Citadel's swords and knives are completely hand-made one off customs made entirely in their small shop in Phnom Penh, Cambodia. We've asked them to make for us a few in the same style, but made in the same way as their custom swords. Crafted individually from start to finish, each one is of course a bit unique in it's own way. Limited to just 100 swords, each is signed by the smith on the nakago with the sword number and comes with a matching certificate.This katana is made in the same manner as the more costly Citadel katana (see Ocean and Bamboo) but with a focus on cutting practice this sword's fittings have been simplified to their purest form. The blade is solid, with no bo-hi or fuller to provide a slightly higher weight and forward balance. However Citadel sharply tapers the blade geometry from the shinogi or central ridge to the mune or back of the blade. This allows for a thicker blade with more niku or apple-seed geometry behind the edge while maintaining proper balance. This means the robust blade can stand up to traditional target cutting of harder targets, usually fresh green bamboo, without worry of chipping the edge.The fittings are hand cut and shaped from pure iron, an extremely tough material that takes a deep black patina and needs minimal maintenance. Iron will bend under tremendous shock instead of break, a feature any samurai would appreciate. The Lotus design of the tsuba is in an older, simpler style (kyo sukashi, maru gata) that reflects the nature of the sword.The tsuka or handle and scabbard are hand carved to fit each individual sword ensuring a proper fit. The ito or handle wrap is of black natural silk imported from Japan. It is tightly wrapped around the full same-gawa or ray skin wrap with the proper hishigami or paper triangles present to ensure a long life of use. The saya is lacquered to a semi-gloss finish with buffalo horn mounts (koiguchi, kurikata and kojiri).This is an exceptional sword for practitioners of tameshigiri that want a unique sword.Collect the set; a samurai wore two swords, the matching Wakizashi is also available to complete your collection. Key Features: Limited to 100 pieces Completely hand made High end fit and finish SPECIFICATIONS Overall: 40" Blade Length: 27 1/2" Handle Length: 11" Weight: 2lb 6oz Point of Balance: 5 3/4" Thickness at Guard: .25" Thickness at Tip: .22" Sori: 3/4" Blade Steel: DNH7 Specs will vary slightly from piece to piece.

€2,639.00*

Item is normally available in about 4-6 weeks.

Citadel

Citadel Pocketknife Higonokami

Citadel Higonokami. The name says it all. A pocket knife in the classic Japanese Higonokami style without lock. The blade is hand-forged (not stainless) from DNH7 carbon steel with forging tracks. The blade is hardened differentiated. Thus, the cutting edge has a hardness of approx. 60 ° Rockwell, the back has a hardness of approx. 44 °. The handle is made from a single piece of horn which has been elaborately bent and shaped. Details: Blade length: approx. 8 cm Blade material: Carbon steel DNH7 Handle Material: Horn

€155.90*

item is available on 06.06.2024 . preorder now

Citadel

Dragon Citadel Tanto

Citadel's swords and knives are completely hand-made one off customs made entirely in their small shop in Phnom Penh, Cambodia. We've asked them to make for us a few swords in the same style, but made in the same way as their custom swords. Crafted individually from start to finish, each one is of course a bit unique in it's own way. Limited to 100 tanto, each is signed by the smith on the nakago with the sword number and comes with a matching certificate. The blade features a hand forged and differentially hardened DNH7 high-carbon steel blade. Each blade is hand polished using traditional stones and powders to produce an authentic look. Each fitting (tsuba, fuchi, kashira) is meticulously hand crafted in pure iron. Each piece is therefore slightly unique and held to a high standard of excellence. Citadel is one of only a handful of sword makers worldwide that still produces fittings in this manner. The tsuka is carved to each individual blade ensuring a tight friction fit with a full same-gawa wrap. The ito or handle wrapping is dark blue wrapped silk imported from Japan. The saya is a work of art in its own right, completely wrapped in ray-skin. Each saya is painstakingly hand carved for the individual piece ensuring a proper snug fit. Key Features: DNH7 Forged High-Carbon Steel Blade Completely Hand-Made Limited Edition of 100 Specifications Overall: 16" Blade Length: 9 3/4" Handle Length: 5" Weight: 15 oz Thickness at Guard: 5.5mm Thickness at Tip: 2.2mm Sori: 0.5" Blade Steel: DNH7 Hrc Edge: 60 Hrc Back: 40 Specs will vary slightly from piece to piece.

€1,899.00*

Dieser Artikel hat eine Lieferfrist von ca. 4-6 Wochen.

Citadel

Citadel Pocketknife Phan Thiet

Citadel Phan Thiet. The blade is hand forged from 420 stainless steel. A flipper opens the not lockable blade. The handle is made of rosewood. Details: Blade length: approx. 7 cm Blade material: 420 Stainless Steel Handle Material: Rosewood

€123.90*

item is available on 06.06.2024 . preorder now

Citadel

Kampot

The Kampot is an efficient liner-locking EDC knife that is as sharp as it is beautiful. The high polished Bohler N690Co Austrian stainless steel blade opens smoothly from the Z40C13 stainless liner lock frame. The smooth polished blue beech scales feel comfortable in your grip. The Kampot slides easily in to your pocket and pulls back out again with the braided leather lanyard included. The craftsmanship of this handmade beauty is visible from the immaculately hand carved back spring and beveled scale edges. A padded nylon canvas pouch with embroidered Citadel logo is included. Specifications Overall: 7 1/2" Blade Length: 3" Handle Length: 4 1/2" Weight: 3.5 oz Thickness at Guard: 4mm Blade Steel: N690Co Handle Material: Beech Specs will vary slightly from piece to piece.

€299.00*

Item is in field warehouse, long distance shipping.

Citadel

Kampot Bone

An elegant pocket knife with an ornamented handle spine. The blade is made of N690Co stainless steel with a HRC of 58-60°. The bearing is made of beryllium bronze and guarantees a gentle and smooth deployment. At the junction between blade and handle is a grooved thumb-rest for a secure hand position. The handle scales are made of bones. Between the liner and the handle scales are red inserts. At the end of the handle frame which is made of Z40C13 steel you can find a hole for a safety strap. A liner lock secures the blade. Blade length 3.1’’

€203.90*

item is available on 06.06.2024 . preorder now

Citadel

Papoose Neck Knife

Limited to 50 unitsFans of necktie knives will love the Papoose by Citadel. Light and sharp almost too awesome to use, but you will once you put it your hand. With a few fingers, your utility cuts will be quick and precise. The notched spine permits your thumb to get in on the action of cutting. The rough scaled blade is accented by the buffalo horn handle, inox ring with red fiber spacer and nickel silver rivet. This is a knife you want handing around your neck for those handy moments when you need a knife.The high carbon steel blade is hand forged from imported XC75 carbon steel, and differentially hardened in the Japanese style. This hardening process creates a hard, durable edge and a softer more resilient spine and tang. The blade is sharpened to a full convex profile which greatly increases the durability of the hardened edge.A full grain leather neck knife sheath is included. As XC75 is a high-carbon steel the knife should not be stored in the leather sheath for a long period of time; a nylon zipper storage pouch is included for long-term storage instead. SPECIFICATIONS Overall: 4 1/2" Blade Length: 2" Handle Length: 2 1/2" Weight: 1.3oz Width at Guard: 7/8" Thickness at Guard: 3mm Blade Steel: XC75 Specs will vary slightly from piece to piece.

€199.00*

Item is in field warehouse, long distance shipping.

Citadel

Citadel Knife Toucan

This uncommon knife is based on the shape of a toucan beak. The blade is differentiated hardened, the cutting edge has a Rockwell hardness of approx. 60°, the back approx. 44°. The sturdy handle-scales are made of rosewood. With high-quality, hand crafted leather sheath. Details: Overall Length: approx. 23.5 cm Blade Length: approx. 12 cm Blade Material: DNH7 Carbon steel Handle Material: Rosewood

€243.90*

Item is normally available in about 3-4 weeks.

Citadel

Occitan

An elegant pocket knife by Citadel. The blade is made of N690Co stainless steel and has a HRC of 58-60. It is secured using a liner lock. The handle scales are made of stabilized maplewood. The jaws are made of Russian stainless damask steel with a leather strap. The Occitan comes with a softcase. Blade length: 3.5’’ Weight: 4 oz

€317.90*

Item is in field warehouse.

Citadel

Citadel Kampot Horn

An elegant pocket knife with decorated handle back. The blade is made of N690Co stainless steel with an HRC of 58-60°. Washers made of beryllium bronze guarantee that its movements are gentle and smooth. A ripple thumb plate on the blade offers a secure grip at the transition point to the handle. The handle scales are made of exceptionally beautiful Hornng wood. The handle frame is made of Z40C13 steel. At its end you can find an eyelet for a lanyard. The blade is secured using a liner lock. Blade length 3.1’’

€187.90*

Item is in field warehouse.

Citadel

Citadel Pocketknife Stavanger Wood

Citadel Stavanger Rosewood. The blade is hand-forged (rust resistant) from T508 steel with a hardness of approx. 58 ° Rockwell. The blade´s back is finely engraved. The knife has an elaborately crafted handle pattern. The blade features a liner lock. Details: Blade length: approx. 6.5 cm Blade material: T508 Steel Handle Material: Rosewood

€164.00*

Item is normally available in about 4-6 weeks.

Citadel

Citadel Ronin Katana

Rônin was called a masterless samurai in ancient Japan. In this context, the story of the "47 Rônin", which avenged the death of their master and thus proved the unconditional loyalty of the samurai to their master, became well known.The Citadel Rônin Katana impresses with its simple, traditional look. The handcrafted tsuba, like the fuchi and kashira, is made of lacquered iron. - Shinogi-zukuri-style blade with a fuller (Bo-Hi) on the back of the blade. - Forged copper habaki. - Handle wrapping made of black, Japanese silk in the classic Hineri Maki style, black matt lacquered sheath with shiny black lacquer speckles (Kuroishime style).The razor-sharp blades are made of 1075 carbon steel. Under traditional clay coating, these are hardened to approx. 60 HRC on the cutting edge and approx. 40 HRC on the back of the blade. The masterly work of the blacksmith comes into its own through the skills of the polisher. The result is a mirror-polished surface and a clearly recognizable hardening line (Hamon).In addition to a manufacturing certificate, each sword comes with a high-quality sheath and a padded Cordura bag for transport. Details: Blade steel: DNH7 Handle material: wood / ray skin / silk Sheath: wood Handle length: 29 cm Blade length: 69 cm Total length (without scabbard): 102.5 cm Weight (without scabbard): 1100 g

€2,499.00*

Item is normally available in about 3-4 weeks.

Citadel

Gurkha Kukri

Kukri are adept at many different tasks depending on the design, light and fast for a primary fighting knife or thick and heavy for back-woods bushcraft. Citadel's version takes a more utilitarian approach, hitting the sweet spot right in the middle of these two extremes. Extremely useful around the camp or on a hunt the knife can be quite effectively pressed into fighting service if needed. The high carbon steel blade is hand forged from imported DNH7 steel and differentially hardened in the Japanese style. This hardening process creates a hard, durable edge and a softer more resilient spine and tang. The blade is sharpened to a full convex profile which greatly increases the durability of the hardened edge. A full grain leather belt sheath is included featuring Citadel's unique button and loop fastener. This system securely holds the knife in place but can be broken easily enough in the event the knife needs to be removed quickly for an emergency. As DNH7 is a high-carbon steel the knife should not be stored in the leather sheath for a long period of time; a nylon zipper storage pouch is included for long-term storage instead. Specifications: Overall: 13 3/4" Blade Length: 8 1/4" Weight: 18.5oz Blade Steel: DNH7 Handle Material: Palisander

€599.00*

Item is in field warehouse, long distance shipping.

Citadel

Citadel Tanto Flores

This tanto received its name from the floral motive on the tsuba, which shows chrysanthemums. This flower is a symbol of the Japanese imperial family and is shown on the seal of the emperor.The tanto is fully handmade. It has a blade of DNH7 carbon steel. It is hardened in the traditional fashion and afterwards hand polished to show the hamon-line. The edge has a hardness of 60 HRC, the back of the blade a hardness of 40 HRC.The grip is covered with rye hide and black, Japanese silk. The menuki (grip decorations) are made of bronze and repeat the floral theme. The lacquered scabbard has fittings from buffalo horn.The tanto is 40,5 cm long, with a blade of 27 cm long and a grip of 12,5 cm long. It weighs 490 grams excluding scabbard.

€1,457.90*

item is available on 06.06.2024 . preorder now

Citadel

Citadel Knife Nordic

Citadel Nordic. The blade is hand forged from DNH7 carbon steel (not stainless) and differentiated hardened. The blade has a hardness of approx. 60 ° Rockwell, the back approx. 44 °. The handle is made of rosewood, the elaborately decorated clamp is made from bronze. With high-quality, handmade leather sheath. Details: Overall length: approx. 19.5 cm Blade length: approx. 8 cm Blade material: DNH7 Carbon Steel Handle Material: Rosewood

€227.90*

Item is normally available in about 3-4 weeks.

Citadel

Trident Beech

An elegant pocket knife with an ornamented handle spine. The Trident has a handy size. Its form guarantees that the handle lies ergonomically in your hand. The blade is made of N690 stainless steel. The handle scales are made of stabilized beech wood. Every knife has its own unique grain. At the handle end you can find a safety strap. A liner lock secures the blade. Blade length 3.3’’

€271.90*

Item is normally available in about 3-4 weeks.

Citadel

Higonokami, small

The name is program. A pocket knife in the classic Japanese Higonokami style, without locking. The blade is hand forged from DNH7 carbon steel (not rustproof) with traces of forging. The blade is hardened differentially. The cutting edge has a hardness of approx. 60 ° Rockwell, the back a hardness of approx. 44 °. The handle consists of a piece of horn, which has been elaborately bent and shaped. Blade length 75 mm

€159.00*

item is available on 06.06.2024 . preorder now

Citadel

Dragon Citadel Katana

€5,299.00*

Item is normally available in about 4-6 weeks.

Citadel

Javelina - Rosewood

Limited to 50 UnitsThe Javelina fixed knife from Citadel is the latest in drop point knives from Citadel. Very comfortable to hold and finely balanced, the knife melds to you hand smoothly. The notched spine allows your thumb to apply pressure for precise cuts. Wicked sharp and beautifuly rustic with the rough scaling on the blade with the polished edge.The high carbon steel blade is hand forged from imported DNH7 steel and differentially hardened in the Japanese style. This hardening process creates a hard, durable edge and a softer more resilient spine and tang. The blade is sharpened to a full convex profile which greatly increases the durability of the hardened edge.A full grain leather belt sheath is included. As DNH7 is a high-carbon steel the knife should not be stored in the leather sheath for a long period of time; a nylon zipper storage pouch is included for long-term storage instead. SPECIFICATIONS Overall: 12" Blade Length: 7 1/4" Handle Length: 4 5/8" Weight: 11.4oz Width at Guard: 1 1/2" Thickness at Guard: 4.8mm Specs will vary slightly from piece to piece.

€349.00*

Item is in field warehouse, long distance shipping.

Citadel

Citadel Chef´s Knife Deba small

Citadel Chef´s Knife Deba small. Hand-forged kitchen knife of the highest quality from Citadel. The blade is made of DNH7 carbon steel. With a carbon content of 0.75%. As with leisure knives from the workshops of Citadel this chef´s knife blade is hardened differentiated. The blade has a HRC of approx. 60 ° and the blade back has a HRC of approx. 45 °. The handle is made of rosewood. The chestnut-section of the handle provides a secure and ergonomic grip. Includes a high-quality sheath of Cordura. Details: Overall length: approx. 22.5 cm Blade length: approx. 10 cm Blade material: Carbon steel DNH7 Handle Material: Rosewood Weight: approx. 90 g

€175.90*

Item is in field warehouse.

Citadel

Citadel Pocketknife Coubi Bone

The model Coubi is the smallest of the Citadel pocket knives. The blade is hand forged from N690Co stainless steel with a Rockwell hardness of 58-60°. The back of the blade is finely decorated at the base. The handle is made of bone with red trim inserts between the plates and the handle-scales. The blade features a liner lock. Details: Blade Length: approx. 5.5 cm Blade Material: N690Co steel Handle Material: Bone

€183.90*

item is available on 06.06.2024 . preorder now

Citadel

Chantha - Black Rayskin Scales

Limited to 50 piecesCitadel's Chantha knife is designed with everyday tasks in mind, the blade is wide with a swedge making for a nice slicing point. When pressed past opening packages the thumb ramp with rounded jimping comes in handy to enhance grip and control. The handle is just the right size to fill the hand and is quite comfortable in long whittling sessions.The blade is hand crafted from Bohler N690Co stainless steel with Z40C13 stainless liner lock frame. This knife comes with black dyed rayskin scales. A stout lanyard ring is cut into the back spacer, keeping the lanyard out of the way until needed.A padded nylon canvas pouch with embroidered Citadel logo is included. SPECIFICATIONS Overall: 17,78 cm Blade Length: 6,98 cm Handle Length: 10,16 cm Weight: 155 g Blade Steel: N690Co Handle Material: Bone Specs will vary slightly from piece to piece.

€359.00*

Item is in field warehouse, long distance shipping.

Citadel

Leonardo Folder - Troyeng

To use the word unique to describe the Leonardo by Citadel would be an understatement. Taking inspiration from Leonardo da Vinci’s wings design, the troyeng (veined ebony) scales are amazingly ergonomic in the hand. The perfectly hand-carved wing scales are consistent from curve to curve. The 2 ¾” hawks-bill Bohler N690Co Austrian stainless steel blade releases easily with the thumb stud from Z40C13 stainless liner lock frame. The high polished back spring and liner locks shine beautifully between the ebony handle slabs. A padded nylon canvas pouch with embroidered Citadel logo is included. Specifications Overall: 7 1/2" Blade Length: 2 3/4" Weight: 4.6oz Thickness at Guard: 4mm Blade Steel: N690Co Handle Material: Troyeng Specs will vary slightly from piece to piece.

€299.00*

Item is in field warehouse, long distance shipping.

Citadel

Bamboo Citadel Custom Katana - Limited Edition III

Citadel's swords and knives are completely hand-made one off customs made entirely in their small shop in Phnom Penh, Cambodia. We've asked them to make for us a few in the same style, but made in the same way as their custom swords. Crafted individually from start to finish, each one is of course a bit unique in it's own way. Limited to 100 swords, each is signed by the smith on the nakago with the sword number and comes with a matching certificate. Click here to read about how these exceptional samurai swords are made.This rendition of the classical bamboo themed katana is a light and fast sword. Hand forged from imported European DNH7 high carbon steel the differentially hardened blade features a "bo-hi" or fuller to lighten and balance the blade without sacrificing strength. This is an extremely collectible and capable sword.The tsuba is hand cut and engraved from pure iron. The "nanako" or stippled pattern on the tsuba is accomplished by hand, quite a feat of patience with a stunning result. The tsuba also features "seki-gane", metal inserts at the top and bottom of the hole for the blade to slip through. These are of a softer metal (copper) than the iron of the tsuba and allow easier shaping of the hole to perfectly fit the tsuba to the blade. Over time if this fit becomes loose or the tsuba is fitted to another blade the seki-gane may be adjusted easily to tighten it back up. This is a small detail usually only found on hand-made Japanese tsuba and is indicative of the level of care and craftsmanship given to these swords by Citadel.The "tsuka" or handle and "saya" or scabbard are hand carved to fit each individual blade ensuring a proper fit. The handle is wrapped in genuine imported silk form Japan and tightly wrapped around the full same-gawa or ray skin wrap around the wooden core. The saya is lacquered in black to a nice semi-gloss finish with a ray skin wrap near the mouth of the saya to strengthen this area.In hand this sword feels as if it is a natural extension to your arm, a truly exceptional experience.Collect the set; a samurai wore two swords, the matching short sword or wakizashi is also available to complete your daisho collection. Key Features: Handmade by skilled artisans Hand carved fittings of pure iron Limited Edition of 100 SPECIFICATIONS Overall: 40 3/8" Blade Length: 27 3/4" Handle Length: 11" Weight: 2lb 3oz Point of Balance: 4 3/4" Thickness at Guard: .25" Thickness at Tip: .2" Sori: 3/4" Blade Steel: DNH7 Specs will vary slightly from piece to piece.

€3,359.00*

Item is normally available in about 4-6 weeks.

Citadel

Bamboo Wakizashi

Citadel's swords and knives are completely hand-made one off customs made entirely in their small shop in Phnom Penh, Cambodia. We've asked them to make for us a few in the same style, but made in the same way as their custom swords. Crafted individually from start to finish, each one is of course a bit unique in it's own way. Limited to just 20 swords, each is signed by the smith on the nakago with the sword number and comes with a matching certificate.The "Wakizashi" or Short Sword was worn with the longer katana, when the pair matched in theme they were considered a Daisho. However, when the katana was surrendered upon entering a home the wakizashi was not, making it truly the side-arm of the Samurai! The tsuba is hand cut and engraved from pure iron. The "nanako" or stippled pattern on the tsuba is accomplished by hand, quite a feat of patience with a stunning result. The tsuba also features "seki-gane", metal inserts at the top and bottom of the hole for the blade to slip through. These are of a softer metal (copper) than the iron of the tsuba and allow easier shaping of the hole to perfectly fit the tsuba to the blade. Over time if this fit becomes loose or the tsuba is fitted to another blade the seki-gane may be adjusted easily to tighten it back up. This is a small detail usually only found on hand-made Japanese tsuba and is indicative of the level of care and craftsmanship given to these swords by Citadel.The "tsuka" or handle and "saya" or scabbard are hand carved to fit each individual blade ensuring a proper fit. The handle is wrapped in genuine imported silk from Japan and tightly wrapped around the full same-gawa or ray skin wrap around the wooden core. The saya is lacquered in black to a nice semi-gloss finish with a ray skin wrap near the mouth of the saya to strengthen this area.These are extremely limited in numbers to be produced (20 only!). Each blade is signed on the tang with the model and number and includes a stamped certificate of authenticity.These swords are entirely hand-made by Citadel.Collect the set; a samurai wore two swords, the matching long sword, Katana, is also available to complete your collection. Key Features: Limited Edition of 20 Hand Forged DNH7 Blade Hand Carved Pure Iron Fittings SPECIFICATIONS Overall: 29 1/2" Blade Length: 21 1/4" Weight: 1lb 9oz Blade Steel: DNH7 Specs will vary slightly from piece to piece.

€2,859.00*

Item is normally available in about 4-6 weeks.

Citadel

Citadel Pocketknife Deimos

Citadel Deimos. The blade is hand forged from N690Co stainless steel with a hardness of 58-60 ° Rockwell. The blade has a flipper for easy opening and is secured with a liner lock. The handle is made of rosewood. Details: Blade length: approx. 11 cm Blade material: N690Co Stainless Steel Handle Material: Rosewood

€277.90*

Item is in field warehouse.

Citadel

Kukri Lock - Horn Scales

The legendary Kukri blade shape lends itself to all manner of tasks, not just as a large fixed camp / fighting knife. The Kukri-Lock from Citadel utilizes this blade shape to great effect, retaining the slight recurve at the base as well as the belly out towards the tip. It's a large folder, best suited for a camping trip or on a hunt. The blade is hand crafted from Bohler N690Co stainless steel with Z40C13 stainless liner lock frame. This knife comes with polished horn scales but Rosewood is also available. A padded nylon canvas pouch with embroidered Citadel logo is included. Specifications Overall: 9 1/2" Blade Length: 3 7/8" Handle Length: 5 3/8" Weight: 10 oz Blade Steel: N690Co Handle Material: Horn Specs will vary slightly from piece to piece.

€299.00*

Item is in field warehouse, long distance shipping.