10% off everything from Windlass SteelCrafts! The discount is automatically calculated in the shopping cart.

Spyderco

Endura 4 Trainer
Trainers or drones are non-sharpened knives that allow for the safe practice of Martial Blade Craft (MBC). They let the user learn deployment/retrieval techniques, perform drills, and develop confidence and muscle memory without risking cutting themselves or others with a sharp blade. The Endura Trainer is identical in weight and size to the 'live' model. To enhance the balance of the piece we've tapered the unsharpened tip and drilled holes through the blade, removing unnecessary bulk. Volcano grip texturing on both sides of the handle put the brakes on your hand slipping while training. All Spyderco training models have red handles designating them as non-sharpened. Tip-up carry. Endura trainers also fit the bill as a unsharpened practice knife to safely teach non-knife people the fundamental movements in safely opening and closing a folder. Specifications : length overall : 8 7/8" blade length : 3 15/16" blade steel : AUS-6 cutting edge N/A weight : 3.0 oz blade thickness : 1/8" handle material : FRN

€114.95*

this item is in stock

Military Model black
A cornerstone in Spyderco's Save and Serve line up, the Military Model came about after someone asked Spyderco's owner Sal Glesser, "If your son were going into the military what folding knife would you send him with?" For certain, it had to meet the requirements of a high-performance, light-weight folder designed for hard use. Since the steel is the spirit of the knife, CPM-S30V with almost 2% carbon seemed the logical choice for the blade given its reputation for long-term edge retention and rust resistance. The 'Millie' has a modified clip-point blade laser cut with a 14 mm Spyderco Round Hole for quick deployment and for use with gloves. Texturing above the hole hold the thumb in contact with the blade's spine during cutting for confident control over the sharpened edge. The handle scales are G-10 with the lock's liner nested (inlayed) directly into the scale, pumping up lock strength without the addition of bulky liners. Spacers between the scales create a gap running the handle's full length exposing the inside workings for inspection and cleaning. The handle flares slightly at the front end creating a finger choil and at the butt end, which keeps the knife from slipping forward or backward in the hand while sawing or making tough or aggressive cuts. A contoured black metal clip is set for right-hand tip-down carry. Specifications : length overall : 9 1/2" blade length : 4" blade steel : CPM-S30V cutting edge : 3 11/16" weight : 4.2 oz blade thickness : 5/32" handle material : G-10 Please keep in mind that you can buy this knife with 2 different blade styles !

€329.00*

this item is in stock

Tri-Angle Sharpmaker
The Tri-Angle Sharpmaker includes two sets of high alumina ceramic stones: a pair of medium-grit (brown) stones for aggressive sharpening and a set of fine (white) stones for professional grade finishing. The stones are triangular for sharpening plain edges on the flat sides and serrated edges on the corners. A furrow running the length of each stone lets you sharpen pointed items like fishhooks, darts and awls. Included is a set of brass safety rods protecting the users hands while sharpening. All components snap into the self-contained ABS plastic base and lid. Die-cut into the base are keyed slots and holes fitted for the stones. They accurately set the stone's sharpening angle at a 30° (15° each side) or 40° (20° each side) for knives and a 12.5° scissor setting. Turn the base over, a channel lets you lay two stones side-by-side (flat-side up) for use as a benchstone. The lid snaps halfway over the base creating a handhold for stability while you're sharpening. Ceramic stones, like glass, will break if dropped, handle carefully. Use them dry, without oil, water or lubricants. To clean scrub stones with a plastic scouring pad and powered abrasive cleaner; let them air-dry. Also autoclave safe. The system comes with an instruction book and DVD.

€104.95*

this item is in stock

%
Slip Stone
This Spyderco slip stone comes with a matching suede carrying case. Details: Size: 2" x 4"

€52.50* €75.00* (30% saved)

this item is in stock

Endela Lockback, serrated edge
The Spyderco Endela is sized directly between the Endura and the Delica to provide the best of both knives to those searching for the best mid-size folding lockback. The Endela may just the the knife you have been waiting for. SPECIFICATIONS: Blade Steel: VG-10 Stainless Blade Grind: Full Flat Blade Finish: Satin Blade Edge: Serrated Handle Material: Black Fiberglass Reinforced Nylon (FRN) with dual nested skeletonized stainless steel liners. Opener: Thumbhole Lock: Lockback with Boye Dent Blade Length: 3 3/8" Handle Length: 4 5/8" Overall Length: 8" Weight 3.1 oz

€128.99*

Item is in field warehouse, long distance shipping.

Para Military Salt
The Para Military 2 showcases a flat-ground blade made from CPM MagnaCut, a state-of-the-art particle metallurgy steel that offers an exceptional balance of edge retention, toughness and superior corrosion resistance. The PlainEdge blade features a non-reflective Diamond-Like Carbon (DLC) coating and is housed in a handle with black G10 scales that feature the signature Caribbean Bi-Directional texture pattern of Spyderco's USA-made Salt series knives. Complementing the blade steel and finish, the knife's nested stainless steel liners, four-way convertible pocket clip and all other hardware are also made of extremely corrosion-resistant materials and coated in black. The classic thumb hole as well as the Compression Lock ensure intuitive operation of the pocket knife. Details: Overall Length: 21,10 cm Blade Length: 8,90 cm Blade Thickness: 3,70 mm Weight: 108,00 g Blade Material: MagnaCut Handle Material: G10

€369.00*

Dieser Artikel hat eine Lieferfrist von ca. 3-4 Wochen.

Tenacious Linerlock Tan
4.38" (11.13cm) closed. 3.38" (8.59cm) satin finish partially serrated 8Cr13MoV stainless blade. Tan bi-directional texture FRN handle. Thumb pull. Lanyard hole.

€79.00*

Item is in field warehouse, long distance shipping.

Murray Carter Minarai Bunka Bocho
An all-purpose knife suitable for preparing meat, vegetables, and fish, the Bunka Bocho literally means "cultural knife" because of its role in making traditional Japanese cuisine in the home. Closely related to the Santoku ("three virtues") knife, the Bunka Bocho has a more acute and utilitarian point.Designed by world-renowned knifemaker Murray Carter, official heir to a 420-year-old Japanese bladesmithing lineage, Spyderco’s Murray Carter Collection faithfully translates Carter’s coveted handcrafted designs into affordable factory-made kitchen cutlery. The newest additions to this proud family of knives are his Minarai Series. Literally meaning “to look and learn,” minarai is a quintessentially Japanese way of describing the role of an apprentice. In that spirit, the Minarai Series expresses five of Carter’s highly refined designs in an economical format featuring solid CTS BD1N stainless steel blades and injection-molded polypropylene handles. A remarkable fusion of time-tested traditional designs and state-of-the-art modern materials. Specifications Blade Length: 7.83" (199 mm) Edge Length: 7.24" (184 mm) Handle Length: 4.86" (123 mm) Overall Length: 12.69" (322 mm) Blade Steel: CTS-BD1N Stainless Steel Blade Thickness: 0.075" (1.9 mm) Blade Style: Chef Blade Grind: Full-Flat Blade Finish: Satin Handle Material: Black Polypropylene Weight: 4.0 oz. (113 g)

€269.00*

Item is in field warehouse, long distance shipping.

Ladybug 3, Foliage Green, plain
Since starting Spyderco, the company has been told their knives are different, peculiar- even out there. All true. Thinking beyond established knife industry barriers allowed Spyderco to introduce new and radical innovations to the knife culture including: one-hand opening, serrations on a folder and a clip to attach a knife to a pocket. Spyderco didn't go into business to rake in a mountain of dough, they're here for more selfish reasons--indulging our passion for creating knives. Spyderco is definitely out of the norm in the knife industry in their dedication to researching and developing fresh, improved and better performing materials- all with function and reliability being key. It attaches to your keychain and is nearly as small as your car keys, Spyderco’s smallest lightweight knife is the Ladybug. Made of VG-10 stainless steel, the hollow ground blade comes in a plain edge configuration. This modified clip-point blade style is matched up with a foliage green, lightweight handle of fiberglass reinforced nylon making the entire knife weigh only 16.4 g. The Ladybug doesn’t have a clip but rather a lanyard hole for attachment to a keychain or lanyard. Like its larger counterparts (and all Spyderco knives) the Ladybug3 packs tremendous cutting power and can take on both fine and heavy cutting tasks. Details: Weight: approx. 16.4 g Overall Length: approx. 11.1 cm Length closed: approx. 6.2 cm Blade Length: approx. 4.9 cm Cutting edge: approx. 4.3 cm Blade Material: VG 10 steel Blade thickness: approx. 2 mm Blade Detail: Plain Hole diameter: approx. 5 mm Handle Material: Foliage green FRN Lock Style: Lock Back Carry System: Pocket Clip

€59.95*

Item is normally available in about 3-4 weeks.

Emphasis
The Spyderco Emphasis lives up to its name by taking all of the best features of best-selling Efficient Series and scaling them up to a full-size design. This Emphasis model features a 3.6" full-flat ground blade, skeletonized steel liners, and textured G-10 handle scales. Item includes a satin deep-carry wire clip. Specifications Overall Length:8.31" Blade Length:3.61" Blade Thickness:0.12" Blade Material:8Cr13MoV Blade Style:Drop Point Blade Grind:Flat Finish:Satin Edge Type:Plain Handle Length:4.81"

€99.00*

Item is in field warehouse, long distance shipping.

Manbug, Blue
This Sprint Run Manbug model features a laminated full-flat grind blade made with a V-Toku2 tool steel core, sandwiched between layers of SUS310 stainless steel. V-Toku2 tool steel is alloyed with tungsten, vanadium, and chromium for maximized high hardness toughness.Side by side, the Manbug and the Ladybug are a contrast of gender related differences. While they’re the same overall length, Manbugs are thicker and more muscular with a meatier frame than their thinner, lighter Ladybug counterparts. Their wider modified clip-point blade and handle carry compact and efficiently like a Ladybug, they simply have more testosterone.The ManBug has a full flat ground blade with a plain edge and satin finish. The BiDirectional Textured blue FRN handle is grippy and features the David Boye Dent on the backlock. The Spyderco ManBug is an impressive small knife that is perfect for key chain carry. Specifications Overall Length:4.46" Blade Length:1.95" Cutting Edge:1.72" Blade Thickness:0.10" Blade Material:V-Toku2/SUS310 Blade Style:Clip Point Blade Grind:Flat Finish:Satin Edge Type:Plain

€119.01*

Item is in field warehouse, long distance shipping.

ManBug, Black, Plain Edge
The newest incarnation of the Spyderco Manbug has the iconic leaf-shaped blade shape, with its well-known graceful curves. Side by side, the Manbug and the Ladybug are a contrast of gender related differences. While they’re the same overall length, Manbugs are thicker and more muscular with a meatier frame than their thinner, lighter Ladybug counterparts. With the new leaf shape, the Manbug still has its recognizable heftier style, but with a touch of elegance. Details: Overall Length: 4.40" Blade Length: 1.90" Cutting Edge: 1.69" Blade Thickness: 0.098" Blade Material: VG-10 Blade Style: Clip Point Blade Grind: Flat Finish: Satin Edge Type: Plain Handle Length: 2.50" Handle Material: FRN Color: Black Weight: 0.70 oz.

€99.00*

Item is in field warehouse, long distance shipping.

Insistent
Since the release of the pocket and budget friendly Efficient Series, Spyderco fans have asked for a smaller, gentleman's carry version. The Insistent answers that call with all of the great features of the Efficient, scaled down by approximately 14 percent. This version is outfitted with a full-flat-ground 8Cr13MoV stainless steel blade, skeletonized steel liners, and textured G-10 handle scales. Specifications Overall Length:6.08" Blade Length:2.48" Blade Thickness:0.11" Blade Material:8Cr13MoV Blade Style:Drop Point Blade Grind:Flat Finish:Satin Edge Type:Plain Handle Length:3.74"

€69.00*

Item is in field warehouse, long distance shipping.

RockJumper, serrated edge, black
The Spyderco RockJumper was purpose-built for climbers, hikers, trekkers, backpackers, or anyone who needs a reliable, lightweight, and rugged knife. It has a Wharncliffe blade made of VG-10 stainless steel, optimized for edge retention and corrosion resistance. The FRN handle has a bi-directional texture that is grippy even in wet conditions. Add the RockJumper to your kit today, it will never let you down. Features: Wharncliffe blade is easy to sharpen and pierces very well. VG-10 blade is very corrosion resistant and holds a good edge. Four-way reversible pocket clip and lanyard hole. Specifications Overall Length:7.49" Blade Length:2.83" Blade Thickness:0.12" Blade Material:VG-10 Blade Style:Wharncliffe Blade Grind:Flat Finish:Satin Edge Type:Serrated

€149.00*

Item is in field warehouse, long distance shipping.

Police Model 4
The Spyderco Police Model is one of the most iconic folding knives ever created. Now this venerable design takes another quantum leap forward by ombining the refined features of the fourth-generation Police 4 with the advantages of lightweight, injection-molded handle construction. Its full-flat-ground G-10 stainless steel blade is housed within a molded, fiberglass-reinforcednylon (FRN) handle featuring non-slip Bi-Directional Texturing™. Skeletonized stainless steel liners nested within the handle provide impressive structural strength and anchor the knife’s sturdy back lock mechanism and its ersatile four-position pocket clip. Specifications: Overall Length: 9.97in (253mm) Closed Length: 5.63in (143mm) Blade Length: 4.39in (112mm) Cutting Edge: 3.95in (100mm) Hole Diameter: 0.55in (14.0mm) Blade Thickness: 0.118in (3.0mm) Blade Steel: VG-10 Edge Type: Plain Grind: Full-Flat Lock System: Back Lock Handle Material: FRN Clip Position: Ambi Tip Carry Position: 4-position Weight: 4.2oz 119g

€189.00*

Item is in field warehouse, long distance shipping.

Delica 4 Trainer
Martial artists and MBC practitioners all follow one cardinal rule, safe practice and training. Learning drills, actions and reactions with an unsharpened training blade allows you comfortable and realistic practice without the consequences of meeting a sharpened edge. Our Delica trainer has the same features as its live counterpart -- minus the sharpened cutting edge. Holes drilled out of the blade and an upswept tip, take away a small amount of weight and make the piece balanced in the hand. Stopping the knife from slipping and sliding, the handle is deeply textured in Spyderco's volcano grip pattern. By making the FRN handle red, it's designated and easily recognizable as a training model. The black metal clip is ambidextrous and positions the knife in the pocket tip-up. Specifications : length overall : 7" blade length : 3" blade steel : AUS-6 cutting edge : N/A weight : 2 oz blade thickness : 3/32" handle material : FRN

€109.95*

Item is in field warehouse, long distance shipping.

Bench Stone
Cubic Boron Nitride (CBN) is a high-tech superabrasive that is second in hardness only to diamond. Offering greater abrasion resistance and thermal conductivity than conventional abrasives like silicon carbide and aluminum oxide, CBN removes steel quickly and efficiently. Spyderco's new 3x8 benchstone combines the many advantages of CBN with a classic flatstone format to supercharge traditional sharpening technique.The broad, perfectly flat carbon steel embryo of this stone is coated with fast-cutting 400-mesh CBN on one side and finer 800-mesh CBN on the other. Ideal for putting an edge on knives, this stone is also the perfect choice for sharpening wood chisels, plane irons, and similar tools and comes complete with a highquality suede protective case.

€159.00*

Item is in field warehouse, long distance shipping.

Delica 4 Foliage Green, Combo Edge
Since starting Spyderco, the company has been told their knives are different, peculiar- even out there. All true. Thinking beyond established knife industry barriers allowed Spyderco to introduce new and radical innovations to the knife culture including: one-hand opening, serrations on a folder and a clip to attach a knife to a pocket. Spyderco didn't go into business to rake in a mountain of dough, they're here for more selfish reasons--indulging our passion for creating knives. Spyderco is definitely out of the norm in the knife industry in their dedication to researching and developing fresh, improved and better performing materials- all with function and reliability being key. Based on the background green found in the U.S. Army’s Digital Cammo, the military foliage green Endura and Delica are designed for both military and civilians. The color is a shade-shifting mix of gray and green that effectively disappears into its surroundings. Spyderco offers this new handle color option on the revamped Delica4 and Endura4. Both models now have screw construction making cleaning and adjusting easier. Their fiberglass reinforced nylon handles come molded with Bi-Directional Texturing® for traction and improved ergonomics. Inside the handle dual skeletonized stainless steel liners make the knife stronger without adding weight and create an anchor that external and internal components attach through, adding more sturdiness and rigidity. Their VG-10 blades are flat saber-ground with a stronger tip and a larger 13 mm opening hole. Added to the blade’s spine is slip resistant jimping. Phosphor bronze washers smooth out the open/close action and the clip is upgraded to a four-way tip-up, tip-down, left- or right-handed clip. This is the Delica 4 Foliage green with ComboEdge and a FRN handle. Details: Weight: approx. 91 g Overall length: approx. 18.1 cm Blade Length: approx. 7.3 cm Blade details: Combo Edge Blade Material: VG-10 Handle Material: Green FRN Lock style: Lock Back Carrying System: Pocket clip

€68.00*

Item is in field warehouse, long distance shipping.

Replacement Stone
This high alumina ceramic stone features an ultra-fine grit and is a replacement item fort the ones included in the Spyderco Tri-Angle Sharpmaker sharpening system (see article 80053). Stones with an ultra-fine grit are used to tighten the blade´s scratch pattern to an even keener degree for hair-popping professional sharpness. The stone is triangular for sharpening plain edges on the flat sides and serrated edges on the corners. A furrow running the length of each stone lets you sharpen pointed items like fishhooks, darts and awls. Length: 7" Width: 5"

€26.90*

Item is normally available in about 3-4 weeks.

Ambitious Lightweight Folding Knife, Serrated Blade
Following in the footsteps of its bigger brothers in Spyderco's Value Folder series, the ultra-compact Ambitious is now available in a lightweight version. It trades the original G10 scales for injection-molded fiberglass-reinforced nylon (FRN), trimming its weight by almost seven percent and offering the added grip security of their signature Bi-Directional Texturing pattern. All other features are consistent with the established version of this model, including a full-flat-ground 8Cr13MoV stainless steel blade, skeletonized full stainless steel liners, a sturdy LinerLock mechanism, and a fully configurable four-position pocket clip. The Ambitious Lightweight is also available in a choice of PlainEdge and SpyderEdge configurations. Specifications Blade Length: 2.43" (62 mm) Cutting Edge: 2.43" (62 mm) Closed Length: 3.58" (91 mm) Overall Length: 5.87" (149 mm) Blade Thickness: 0.118" (3.0 mm) Blade Material: 8Cr13MoV Stainless Steel Blade Style: Lead Shaped Blade Grind: Full-Flat Blade Finish: Satin Blade Edge: Serrated Handle Material: FRN Handle Color: Black Locking Mechanism: Liner Lock Pocket Clip: Stainless Steel (Tip-Up/Down, Right/Left Carry) Weight: 2.79 oz. (79 g) Please note: this is the knife with the serrated blade. The correct article picture will follow shortly.

€66.00*

Item is in field warehouse, long distance shipping.

Enuff 2 Blue K390
Based on extensive customer feedback, Spyderco co-founder Sal Glesser redesigned the original Enuff fixed blade to create the longer, leaner Enuff 2. He then supercharged the design with the addition of Bohler-Uddeholm's K390 MICROCLEAN tool steel, which is renowned for its extreme strength and edge retention. This expression of the Enuff 2 takes that evolution a step further with the addition of Spyderco's aggressive SpyderEdge serration pattern. The ultimate cutting tool for tough, fibrous materials, this Enuff 2 features signature blue FRN scales and an injection-molded polymer sheath with G-Clip attachment.When not in use, the Enuff 2 rides in an injection-molded polymer sheath that is reminiscent of the sheath of first-generation Enuffs. The mouth of the sheath has integral "ears" that grip the leading edges of the handle scales for a secure snap fit. However, as an extra measure of security, the sheath also features a leather retaining strap secured by a stainless steel stud. To provide a broad spectrum of carry options, it comes complete with a G-Clip mount that can be configured for angle-adjustable belt wear on either side of the body and also functions as a spring clip for inside-the-waistband carry. Specifications: Blade Length: 3.97" (101 mm) Cutting Edge: 3.70" (94 mm) Handle Length: 4.03" (102 mm) Overall Length: 8.00" (203 mm) Blade Thickness: 0.118" (3.0 mm) Blade Material: K390 Tool Steel Blade Style: Leaf-Shaped Blade Grind: Full Flat Blade Finish: Satin Blade Edge: Serrated Handle Material: FRN Handle Color: Cobalt Blue Sheath: Polymer Model Number: FB31SBL2K390 Model Name: Enuff 2 K390 Weight: 3.3 oz. (94 g) Weight with Sheath: 6.0 oz. (170 g)

€379.00*

Item is in field warehouse, long distance shipping.

Endura4 Light Black FRN
With the Endura and the Delica Spyderco introduced in 1990 two pocket knives on the market, which should be one of the most popular models. The Endura is extremely robust with only a small weight and has been continuously advanced since the first release. The handle is made of FRN (Fiberglass Reinforced Nylon) and the blade is made of stainless VG-10 steel. Details: Overall length: approx. 22.2 cm Blade length: approx. 9.6 cm Blade thickness: appprox. 3 mm Blade Material: VG10 Handle Material: FRN Weight: approx. 103 g

€126.95*

Item is normally available in about 3-4 weeks.

Native Chief, partially serrated edge
With a closed length of 13.03 cm, the Spyderco Native Chief Knife is a handy and powerful tool for various applications. The 10.16 cm long blade made from high-quality CTS-BD1 stainless steel with a satin finish offers premium cutting performance and durability. The handle made from black bi-directional texture FRN material provides a secure and comfortable grip. The Native Chief Knife by Spyderco also features a thumb pull for easy opening, a lanyard hole for attachment, and a pocket clip for convenient carry. With its thoughtful construction, high-quality craftsmanship, and top-notch materials, the Spyderco Native Chief Knife is a reliable companion in any situation. Whether in everyday life, camping, or emergency situations, this knife is always at your service. Technical Details: Closed Length: 13.03 cm (5.13 inches) Blade: 10.16 cm (4 inches) satin finish CTS-BD1 stainless steel Handle: Black bi-directional texture FRN material Thumb pull for easy opening Lanyard hole for attachment Pocket clip for convenient carry

€249.00*

Im Außenlager, Langstreckenversand - in 12-14 Tagen bei Dir zu Hause

Pacific Salt 2, Black blade, serrated edge
A dynamic combination of the third-generation Endura one-piece handle design and the ultra-corrosion resistant properties of H-1 steel, the Pacific Salt was an incredibly capable full-service folding knife. What it lacked, however, were the improvements that make the current Endura 4 even better than its predecessor—like a high-traction Bi-Directional Texture pattern, enhanced handle ergonomics, and a versatile four-position pocket clip. The improved Pacific Salt 2 fixes all that, integrating an H-1 blade with a linerless handle that proudly includes all these advanced features. Another shining example of Spyderco's passion for Constant Quality Improvement (CQI), this knife was born to perform in and around the water.The original black-bladed Pacific Salt endured extensive military testing to become an issue item in aircrew survival kits. Following that proud tradition, the black-bladed Pacific Salt 2 takes this enhanced design and subdues it with a non-reflective titanium carbonitride (TiCN) blade coating and matching black coatings on its four-position clip and other handle hardware. Specifications Blade Length: 3.78" Closed Length: 4.98" Overall Length: 8.72" Cutting Edge: 3.39" Blade Thickness: 0.114" Blade Material: H-1 Steel Blade Style: Drop Point Blade Grind: Hollow Blade Finish: Black TiCN Blade Edge: Serrated Handle Material: FRN Handle Colors: Black Locking Mechanism: Lockback Pocket Clip: Tip-Up/Down, Right/Left Carry Weight: 2.9 oz.

€189.00*

Item is in field warehouse, long distance shipping.

Murray Carter Minarai Nakiri
Meaning "vegetable cutter," the Nakiri's unique rectangular shape and slightly upturned edge make it the perfect tool for precisely push-cutting all kinds of vegetables. The knife's blade shape also allows its length to remain consistent after years of sharpening. Designed by world-renowned knifemaker Murray Carter, official heir to a 420-year-old Japanese bladesmithing lineage, Spyderco’s Murray Carter Collection faithfully translates Carter’s coveted handcrafted designs into affordable factory-made kitchen cutlery. The newest additions to this proud family of knives are his Minarai Series. Literally meaning “to look and learn,” minarai is a quintessentially Japanese way of describing the role of an apprentice. In that spirit, the Minarai Series expresses five of Carter’s highly refined designs in an economical format featuring solid CTS BD1N stainless steel blades and injection-molded polypropylene handles. A remarkable fusion of time-tested traditional designs and state-of-the-art modern materials. Specifications Blade Length: 7.26" (184 mm) Edge Length: 6.62" (168 mm) Handle Length: 4.87" (124 mm) Overall Length: 12.13" (308 mm) Blade Steel: CTS-BD1N Stainless Steel Blade Thickness: 0.074" (1.9 mm) Blade Style: Nakiri Blade Grind: Full-Flat Blade Finish: Satin Handle Material: Black Polypropylene Weight: 4.4 oz. (125 g)

€259.00*

Item is in field warehouse, long distance shipping.

Bill Moran Drop Point
Bill Moran is recognized as the grandfather of American custom knifemaking and the founding father of the American Bladesmith Society. He started pounding steel, making knives more than fifty years ago. If you're lucky enough to find a custom-made Moran to buy, expect to shell out five-figures, minimum. His work and designs are that revered. Spyderco is privileged to offer a production fixed-blade collaboration patterned in Bill Moran's ageless tradition. We've made it available in two distinct blade shapes. The FB01 (pictured) has an upswept Bowie-style blade, the FB02, a drop-point shape (see related item below). Both blades are flat-ground VG-10 and carry Bill's signature. They are tapered, starting thick where the blade joins the handle, thinning down the spine to a fine, uniformly ground tip. In the hand the knife conveys a unique feeling of balance, called by some a sweet spot. The sweet spot is due to the blade and handle being comparable in weight. This balance transfers into a feeling of steady control over the cutting edge. The FRN handle three-dimensionally fills out the palm and is inlayed with a panel of non-sliding Kraton. Highly recommended for hunting and camping both models come in a molded Kydex sheath with multi-position Tek-Lok fastening system. Specifications: Overall length: 8" Blade length: 3 7/8" Blade steel: VG-10 Cutting edge: 3 1/2" Weight: 3 oz Blade thickness: 1/8" Handle material: FRN

€119.01*

Item is normally available in about 3-4 weeks.

Flight
To date there are five models: The Cara Cara, Meadowlark, Flight, Pelican and Crossbill. All models have hollow-ground blades manufactured using 8Cr13MoV stainless steel, which is similar to Aus-8 in its properties, performance and function. 8Cr13MoV steel contains both molybdenum and vanadium. Molybdenum enhances the strength and hardness of the steel, vanadium its wear resistance and toughness. Carbon augments the steel's tensile strength and increases its resistance to wear and abrasion. Resulting from this recipe is blade steel that retains a sharp cutting edge over time and use. Most byrds are available with a olain or combination plain/serrated cutting edge. The "comet" shaped opening hole is a trademark of the byrd line and is synonymous with the stringent quality requirements, high performance materials and manufacturing, which go into every knife. fully stainless handles have a sequence of ergonomic curves that fit into the palm for comfort and fatigue-free control while cutting. For additional safty, a portion of the lock release is ground away. This is a design add-on conceived by custom knifemaker David Boye and eliminates the chance of gripping the knife tightly enough to unintentionally release the lock. All byrds feature a pocket clip that clips the knife inside a pocket and it attaches to either end of the folder for tip-up or tip-down right-hand carry. Specifications : Overall length: 7 7/8" Blade length: 3 7/16" Blade steel: 8Cr13MoV Cutting edge: 3 3/16" Weight: 5.5 oz (156 g) Blade thickness: 1/8" Handle material: Stainless Steel Please keep in mind that you can buy this knife with 2 different blade styles !

€39.00*

Item is in field warehouse, long distance shipping.

Wakiita Bunka Santoku
The Spyderco Bunka Bocho is a full-sized clip point chef's knife that is built for long days in the kitchen.This knife is from the Wakiita series within the Murray Carter Collection, characterized by an all black G-10 handle.The Spyderco Murray Carter collection of kitchen knives are beautiful and funcitonal kitchen tools for discerning chefs. Designed by master bladesmith Murray Carter, and built to precise standards by Spyderco in Seki City, Japan. The knives are characterized by their octagonal handles with hidden tangs, so the knife has a pleasant balance for long use. Specifications Overall Length:12.75" Blade Length:7.75" Cutting Edge:7.25" Blade Width:2.00" Blade Thickness:0.80" Blade Material:CTS-BD1N Blade Style:Clip Point Blade Grind:Flat Finish:Satin

€399.00*

Item is in field warehouse, long distance shipping.

Military 2 CPM S110V G10 Blue PlainEdge
The long-awaited Military 2 improves on the design of the proven Military model with several new features, including Spyderco's signature Compression Lock mechanism, larger stainless steel liners and a fully configurable four-position pocket clip. The blade is made from CPM S110V, a state-of-the-art particle metallurgy steel enriched with high levels of vanadium and niobium for exceptional wear resistance, edge retention and corrosion resistance. Like all members of Spyderco's CPM S110V family, the unscrewable G10 handle scales feature a distinctive dark blue color. Details: Overall Length: 24,10 cm Blade Length: 10,20 cm Blade Thickness: 3,70 mm Weight: 122,00 g Blade Material: CPM-S-110V Handle Material: G10 Opener: Thumb Hole Opening: Manual Lock Type: Compression Lock Color: Blue

€399.00*

Item is in field warehouse, long distance shipping.

Counter Puppy Purple Plain Edge
Counter Puppies are an exciting concept in kitchen cutlery. Their injection-molded high impact plastic handles are shaped like the stylized body and legs of a puppy. This novel design allows them to stand upright on a counter or tabletop, keeping them clean and handy while creating a truly distinctive table setting presentation. Counter Puppy blades are crafted from corrosion-resistant 7Cr17 stainless steel and full-flat ground for outstanding edge geometry. They are available with a choice of a blue or purple handle and either a PlainEdge or fully serrated SpyderEdge cutting edge. Man’s best friend just got even better. Specifications Blade Length: 3.46" Handle Length: 3.49 Overall Length: 6.95 Blade Material: 7Cr17 Blade Thickness: 0.083 Blade Style: Drop Point Blade Grind: Full-Flat Blade Finish: Satin Handle Material: Purple Plastic

€39.00*

Item is in field warehouse, long distance shipping.

Endura Dark Green, Green FRN Handle, plain edge
Since starting Spyderco, the company has been told their knives are different, peculiar- even out there. All true. Thinking beyond established knife industry barriers allowed Spyderco to introduce new and radical innovations to the knife culture including: one-hand opening, serrations on a folder and a clip to attach a knife to a pocket. Spyderco didn't go into business to rake in a mountain of dough, they're here for more selfish reasons--indulging our passion for creating knives. Spyderco is definitely out of the norm in the knife industry in their dedication to researching and developing fresh, improved and better performing materials- all with function and reliability being key. The Dark Green fiberglass reinforced nylon handles come molded with Bi-Directional Texturing® for preferred traction and improved ergonomics. Inside the handle dual skeletonized stainless steel liners make the knife stronger without adding weight and make an anchor for all external and internal components to attach through adding sturdiness and rigidity. Their ZDP-189 blades are flat saber-ground with a stronger tip and larger 13 mm opening hole. Phosphor bronze bushings smooth out the open/close action. The clip is upgraded to a four-way tip-up, tip-down, left- or right-handed clip. The Spyderco Endura Dark Green features a closed Lock Back, a ZDP-189 stainless standard edge blade with thumb hole pull and a dark green FRN handle with black coated stainless pocket clip. Details: Weight: approx. 136.2 g Overall Length: approx. 22.2 cm Blade Length: approx. 9.5 cm Blade Material: ZDP189 Blade Detail: plain edge Handle Material: British Racing Green FRN Lock Style: Lock Back Carry System: Pocket Clip

€149.00*

Item is normally available in about 3-4 weeks.

Z-Cut Kitchen Knife, green, plain edge
The pointed version of Spyderco's Z-Cut knife combines all the advantages of an offset design with an acute point that is perfect for detailed cutting tasks. Its blade is crafted from nitrogen-enriched CTS-BD1N stainless steel and features a full-flat grind for precise, friction-free cutting performance. Available with a choice of a plain-edged or fully serrated cutting edge, it features a durable polypropylene handle injection molded directly onto the blade’s tang. The fully serrated version showcases Spyderco's signature SpyderEdge serration pattern, which dramatically increases the functional length of the cutting edge and stays sharper significantly longer than conventional edges. Both edge configurations are available with a choice of black, green, red, or yellow handles. Specifications Blade Length: 4.38" Cutting Edge: 4.29" Handle Length: 4.37" Overall Length: 8.71" Blade Material: CTS BD1N Stainless Steel Blade Thickness: 0.05" Blade Grind: Full-Flat Blade Finish: Satin Handle Material: Polypropylene Handle Thickness: 0.42" Weight: 1.0 oz.

€24.00*

Item is in field warehouse, long distance shipping.