We’re happy to introduce the fourth member of the SK Series, the SK18 Erna mobile chef’s knife! It’s light, has got a very comfortable grip in Carelian curly birch and a fantastic blade in our famous laminated cobalt special steel. Bring it to the barbeque party as your personal chef’s knife and your day is made! Comes in a genuine brown leather sleeve and case with zipper.
Always clean the knife in hot water and some dish soap. Dry with a clean cloth.
Never put the knife in a dishwasher!
Never try to cut bones or frozen food, the edge will break or bend.
Always use wooden or plastic boards, never ceramics, glass or marble boards.
Use our D12 or DC521 for sharpening.
Blade steel: Lam. CoS
Hardness (HRC): 60
Weight (knife): 116 grams
Handle material: birch wood
Blade length: 18 cm
Blade thickness: 2.5 mm
Total length: 29 cm
In our usual way, we have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here we have really put all our efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.
This is the world’s first folding knife with a blade of laminate powder steel, the market innovation Super Gold Powder Steel, SGPS. Powder steel is extremely costly and difficult to work with, and requires advanced technology in combination with experienced knifemakers. The advantage of this steel lies in its outstanding edge retention: there is simply nothing to compare today. The slim handle consists of strong composite material, which makes the knife light and pleasant to carry. With blade grooves on either side, the knife is completely symmetrical and is as easy to use for right-handers and left-handers. The traditional lockback function offers no unpleasant surprises, but locks the blade in its open position with a distinct reliable click.
Blade steel: Lam. SGPS
Hardness (HRC): 62
Cut: Flat ground
Handle material: Zytel
Weight (knife): 42 grams
Blade length: 6,4 cm
Blade thickness: 2.5 mm
Total length: 15 cm
Length (closed): 8,6 cm
Closure: Lock-back
CMT (Character, Morse, Telephony) stands out as one of the most exclusive series of chef’s knives ever made. With more than thirty years of experience in knife steel technology, we have chosen to use a laminate cobalt steel. It’s a steel which has proven to be both strong and stay sharp very well. On top of that we add a convex edge which is both sharp and strong, also a result of our long experience of knives. In order to get a tight and hygienic joint between the cross-guard and the blade we weld the guard to the tang with a special electrode and then grind a sleek profile. To this we add an exceptionally beautiful maroon micarta to ensure a handle that will last as long as the blade. It’s obvious that these knives are entirely made by hand – no machine can produce such fine made knives!Those who appreciate handcrafted, high quality knives in general will find that this is a series that is made for them. Important factors such as hi-end steel, exclusive materials, a well thought out design and an exclusive manufacturing method will remind the user of these knives about the quality that we also use on our hunting knives. With normal care, these chef’s knives will work throughout your entire life. Delivered in a beautiful solid wood gift box.How do I care about these knives in the best way?To begin with, we recommend that they should not be used for frozen meat nor to cut bones with. If you do you risk a broken or bent edge, despite the high quality. Cold makes the steel brittle and that also applies to the most exclusive of steel. Neither is a chef’s knife very good for heavy chopping, instead use a tooth tip tempered saw or cleaver. Finally, never place a nice knife in a dishwasher, that will considerably shorten the life of the knife and might ruin the edge. Make it a habit to hand wash the knife and let it dry before putting it back to its place.How do I sharpen the CMT knives?We gladly recommend our diamond sharpening steel. Our experience says that they quickly develop a really good edge. Diamond sharpeners might be a bit rough at first, but they get better after a break-in period. If you want to just tune the edge, we recommend our ceramic steel which work off significantly less steel but brings a really sharp edge. The best is probably a combination of these sharpeners which as well will last several decades.
Blade steel: Lam. CoS
Hardness (HRC): 60
Weight (knife): 230 grams
Handle material: Maroon Micarta
Blade length: 15.5 cm
Blade thickness: 3 mm
Total length: 28 cm
Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used as intended, namely as a sharp precision tool. A knife of this kind is of course not a throwing knife, nor is it particularly good at splitting wood – for those functions, you’ll find an axe to be both better and cheaper.The basis of the X-knife’s strength lies in the laminated cobalt steel, and also in the well-thought-out construction in which break zones have been eliminated. Together with the hand-shaped convex edge, the X-knife is a concept that beats everything else in the world in terms of safety and comfort.A few words about the all-black version: This surface is the hardest we have ever encountered. Although we really tried to wear down the black coating with the toughest, driest curly birch we could find, we never succeeded in getting holes in this extremely hard, durable surface. Still, we cannot guarantee that it will stay for time and eternity, after all, the blade can be ground and certainly bites a diamond or ceramic stone on the surface. But you have probably never met a harder surface, the hardness is at 2400 HV (Vickers) or around HRC 83.In our usual way, we have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here we have really put all our efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.As an accessory, the knife sheath will be available with a stainless clip that allows you to easily carry the knife on your waist belt. The advantages are several – including that you can easily remove and stow your knife. When belt-mounted, the knife will hang vertically, a few centimeters lower than the belt, allowing it to be accessed even if wearing a backpack or long jacket. The articulation in this sheath system allows the wearer to move the knife and sheath to one side when seated or driving a vehicle.Overall: We won’t be surprised if people starts recognizing the X-knife as the world’s most thoroughly thought-out knife concept where no corner has been cut, nothing spared, to bring out the very best from an ergonomic and safety point of view. The knife is sharp and strong, the sheath is smart and safe. So, what more can you ask for? Well, we’ve created the knife to be really good looking too!
Details:
Blade steel: Lam. CoS
Hardness (HRC): 60
Scabbard: Zytel
Weight (knife): 401 grams
Handle material: Thermorun
Blade length: 16.1 cm
Blade thickness: 7 mm
Total length: 28.4 cm
Coating: satin finish
We’re happy to present something everyone has been waiting for – a combination diamond/ceramic whetstone that will handle all your sharpening needs. The newly-developed DC3 and DC4 whetstones consist of a fine diamond stone (25 micron) and a very special ceramic stone, made of synthetic sapphires. The advantage of these materials, although they get worn, will still keep their flat shape this is important when you sharpen your knife. And, since these materials are the hardest we know of, they will sharpen any steel, even these extremely hard powder steels. You don’t need any lubrication for these stone but now and then you should consider cleaning them with warm water and liquid soap. The stones might feel coarse from the start but will become smoother/better after some use. A leather pouch is included.
Dimensions: 7 x 25 x 75 mm
Weight: 38 g
The injection molded zytel sheath offers a neat safe and strong combination of qualities which should be very attractive to any user. Now new sheath for left-handed, same quality same price.
The injection molded zytel sheath offers a neat safe and strong combination of qualities which should be very attractive to any user. Note that this sheath is a cover for blade only, not to be carried on belt. Preferably in your rucksack or side pocket.
Leather sheath for A1, black leather, with double liner. This sheath has a rotatable strap which means that it’s suitable for both right and left handed people.This sheath will also fit the A1x, A1xb, A1pro and SK6. Please note that the leather sheath is Very tight for the A1pro, A1x and A1xb at first. Keep the knife in the sheath for a few days, with the strap buttoned. This will allow the sheath to stretch and form itself to fit the knife better. After a while it will fit better due to the leather stretching with time.
PXLx is a further development of our big seller PXLwh, the work horse in the PXL series. To make this knife even more versatile, we have added a strong pocket clip. It’s a robust, strong, lightweight and extremely reliable folding knife in the larger size range. The blade is made in our laminated cobalt special steel and it brings an unlikely sharpness that will last longer than you think. The blade locks in open position with a proven liner-lock system. Because of the small thumbstud on the blade, it folds easily using one hand only. That is very useful when you have to stick to yourself or another thing with the opposite hand. The handle is also made with a material called grilon and is considered to be among the most reliable of all plastics.
Blade steel: Lam. CoS
Hardness (HRC): 60
Cut: Flat ground
Handle material: Grilon
Weight (knife): 131 grams
Blade length: 8.8 cm
Blade thickness: 3.5 mm
Total length: 19,9 cm
Length (closed): 11.1 cm
Closure: liner-lock
Special feature: Incl. clip
What distinguishes a Swedish knife? Perhaps the apparently simple design or maybe providing a good and safe function, all without frills. The classic clean lines discern a philosophy that honours the skill and experience of the mind, where the tool is allowed to play its part but to outshine the one that holds the handle – the perfect combination. So it is with Jarl and Juni, our new sheath knives. Handles of rich curly birch, solid nickel silver fittings and sharp blades of laminate powder steel. The world’s best, in our opinion. Open, low hanging black leather sheath, for easy access.Jarl – is as Earl or Duke, a title used by the most powerful officer in Sweden. The “right hand” to several Swedish kings during the middle age or around 1000 – 1300 A.D., the most powerful public official, during the time when Sweden was christened and became a nation. A good old name, not very common – but sounds powerful and is treated with respect.
Blade Steel: 3G
Hardness (HRC): 62
Sheath: Leather
Weight (knife): 135 grams
Handle material: birch wood
Blade length: 9.7 cm
Blade thickness: 4.5 mm
Total length: 21 cm
Coating: satin finish
Being well dressed is a concern no matter where you are. Clothes should fit the circumstances, the situation, needs, and a person’s expectations. The same goes with knives! Having the “right” knife for any situation usually means having several to choose from. And with all the different local laws confusing the matter, one must be very careful with the knife they choose.At first glance, the Mod. U4 is a seemingly modest penknife. No one would give it a second look when you pulled it from your pocket to peel the apple, open that letter, or cut a string. But looking closer one notices that the blade consists of high-grade powder steel with an edge that stays sharp for a very long time. Holding the knife in your hand you would also notice the lightweight (22 grams) design. The blade locks for added safety and the symmetrical design allows for use by both right and left handers. The Mod. U4 is an excellent knife for carrying in your pocket, giving you a strong tool in a small package. Someone described the knife as resembling a wolf’s tooth and there just may be something to that. You might say the Mod U4 is “A Wolf in Sheep’s Clothing”.
Blade steel: Lam. SGPS
Hardness (HRC): 62
Cut: Flat ground
Handle material: Zytel
Weight (knife): 22 grams
Blade length: 5.3 cm
Blade thickness: 2.5 mm
Total length: 12.3 cm
Length (closed): 7 cm
Closure: lock-back
Tre Kronor, the Swedish knife series, offers a highly advanced technological solution combined with timeless Swedish design. As the result of a long development process, we are the first company in the world to be able to offer a laminated knife blade in 3G steel, edged with sintered steel, or powder steel. To this edge steel, we have added a resilient, anticorrosive steel which stabilises the hard centre. This gives a rigid, strong blade that retains its edge extremely well.These knives are in the Swedish minimalist idiom, where form harmonises with function. The result is an edged implement that the user will find an easy and accommodating knife — a world-beater from Sweden.
Blade Steel: 3G
Hardness (HRC): 62
Sheath: Leather
Weight (knife): 160 grams
Handle material: Cocobolo
Blade length: 8 cm
Blade thickness: 4.5 mm
Total length: 17.5 cm
Coating: satin finish
The Fallkniven Professional Hunter’s Knife (PHK) is one of the best hunting knives in the world. Hunting leaves little room for error when function, safety and hygiene are top priorities. The special blade design, called an upsweep-drop point, offers an effective skinning edge yet without the problems common to wide-bladed dedicated skinning knives.The 3G stainless laminate powder steel (VG2-SGPS-VG2) offers a blade that is incredibly strong and it keeps a sharp edge extremely well. The combination of a thermorun handle and a stainless steel crossguard makes this knife both safer to use and comfortable for long and hard game processing work.The Fallkniven Professional Hunter’s Knife comes with an injection molded zytel sheath offering the user a functional, safe and strong combination of qualities for carrying the knife. The heavy zytel plastic design is hygienic, easy to clean, and securely contains the knife both with friction and a webbing snap loop.
Blade Steel: 3G
Hardness (HRC): 62
Scabbard: Zytel
Weight (knife): 190 grams
Handle material: Thermorun
Blade length: 12.6 cm
Blade thickness: 5 mm
Total length: 23.9 cm
Coating: satin finish
Gentleman’s Pocket Knife appears to be a traditional, slightly old-fashioned pocket knife but if you look at it closely you will find nothing but modern materials and hi-tech solutions. We asked some professional hunters to look at a handmade sample of the GP, and their spontaneous review was: This is how a folding knife for hunting purposes should look like! Aside from personal preferences, we guess that many people will like the steel of this knife, our laminated cobalt steel is unlikely sharp.Other benefits include the reliable blade lock. A properly built liner-lock system is, in our opinion, the world’s strongest blade lock while still being easy to deal with. This technical solution also means that the knife is easy to clean. Rinse it under running warm water and let it dry for achieving best hygiene and function. As the strong blade bolt is threaded, you can adjust the blade inertia to suit your personal taste. The blade joint does not require lubrication. Oil and grease rather attract dust and dirt and this will increase rather than reduce wear. The shackle at the end of the handle allows you to tie the knife – you wouldn’t like to lose this beauty!The GPdi is made of Lam. CoS steel and with a handle of desert ironwood. Desert ironwood is a very durable, heavy and hard wood that, due to its high density, can be a little difficult to process and it also sinks in water.
Blade steel: Lam. CoS
Hardness (HRC): 60
Cut: Flat ground
Handle material: Cocobolo
Weight (knife): 97 grams
Blade length: 7,8 cm
Blade thickness: 3 mm
Total length: 18 cm
Length (closed): 10 cm
Closure: liner-lock
A lot has happened behind the scenes around this folding knife, but the aim has always been the same – to produce a folding knife with a sensible size and attractive design. Since we have sold folding knives for a long time we wanted to use that experience and make a knife that was practical, attractive and reliable. The P folder was born. From start with a blade in solid VG10, nowadays with a blade in laminated powder steel, our famous 3G stainless steel. The P folder is easy to clean since the back of the handle is open, something that makes it very suitable for hunting purposes. All models come with a black cordura sheath, which attaches to the belt.In general, a folding knife can never be as strong as a sheath knife, and since it is the result of several hundred different work operations, it must of course be more expensive to manufacture. On the other hand it is a handy format and acceptable in many situations.Inspired by the world famous knifemaker R.W. Loveless, mod. P is a symbiosis between advanced technology, genuine handicraft and timeless design – a knife for the modern hunter. Today available with a handle in beautiful redwood, desert ironwood or hi-tech carbon fiber.
Blade Steel: 3G
Hardness (HRC): 62
Cut: Flat ground
Handle material: Carbon Fiber
Weight (knife): 80 grams
Blade length: 7,7 cm
Blade thickness: 3 mm
Total length: 18 cm
Length (closed): 10.3 cm
Closure: liner-lock
A new world standard was set with the Fallkniven A1 through attention to important details including technical design, ergonomics and economy. The Fallkniven A1 surpasses international standards for strength, personal security capabilities, and value for money.The Fallkniven A1 is an all-purpose knife on the larger side designed for heavy duty use. The powerful blade is made of extremely hard and tough laminated VG10 steel, and will withstand the stress of hard use. The knife is superb at chopping as well finer daily cutting tasks thanks to the ergonomic grip. The full tang goes entirely through the handle so you can strike with the end of it without breaking the grip. The sturdy black leather sheath allows you to fasten the knife on your belt or your pack, and even upside down. The Fallkniven A1 is unaffected by water and works equally well in extreme cold and stifling heat. Choose between a Zytel sheath or a black dangler type leather sheath.A1 black coatingIf your needs require that no reflections come from your knife blade, we offer a black CeraKote option. The CeraKote is an extremely tough surface coating that will also protect the blade from corrosion. CeraKote is a hard coating made of Teflon and ceramics that we apply for military users and others who want to avoid shiny blades. Be aware, however, that although CeraKote is an industry standard, it is also just a finish applied to the metal blade similar to painting a car. Please note that physical abrasions could scratch through the CeraKote coating. Over time, the black CeraKote may separate from the blade, but more durable coatings make the knife difficult to sharpen and cost up to 100 times more than CeraKote.Attaching a black surface on a rust resistant, perfectly smooth blade so that it sticks for time and eternity is all impossible. We have tested some extremely hard coatings, but they proved to be many times more expensive and make it harder to sharpen the knife.
Blade steel: Lam. VG10
Hardness (HRC): 59
Sheath: Leather
Weight (knife): 305 grams
Handle material: Kraton
Blade length: 16 cm
Blade thickness: 6 mm
Total length: 28 cm
Coating: satin finish
The same diamond whetstone as DC3, but instead of the leather pouch, it is sold with a double coated pressure sensitive adhesive tape which allows you to fasten it on any flat spot, e g our zytel sheaths. The VHB 5925F tape is extremely strong and will harden permanently within 24 hrs. In size the D3t will fit the F1, S1, H1 and the A1 zytel sheath.Dimensions: 75 x 25 x 2 mm
The Kolt Knife is probably our best dry meat knife, no other knife is as good as the KK when it comes to cutting thin slices of a piece of dried or smoked meat. Of course, the knife can be used for a lot more and the simple reason is the handy size. In its original form the Kolt Knife had a very simple blade cover. However, many fans of the KK knife today were interested in a traditionally shaped leather sheath. We are now offering the KK frock knife with well-fitting sheath made of heavy black leather of the best quality. A small zytel edge cover is also included.
Blade steel: Lam. CoS
Hardness (HRC): 60
Sheath: Zytel / Leather
Weight (knife): 84 grams
Handle material: Thermorun
Blade length: 8.5 cm
Blade thickness: 3,85 mm
Total length: 18.5 cm
Coating: satin finish
Not only does our diamond steel feature a surface fully covered with DeBeer’s diamonds, it’s also made from a solid, well heat treated and tempered premium steel. The benefit you’ll get is a steel which will work extremely well for quite many years.The independent test institute CATRA in Great Britain has compared our steel with diamond steels from other manufacturers and found that our steel provides a ten times longer sharpening life and metal removal – after more than 40.000 strokes it still worked while the others had given up after 4000 strokes!So, if you’re looking for a professional diamond sharpening steel you know the source.Length 300 mm. (450 mm including handle)
Model NL1 Thor. It’s a strong chopper of world-class quality, where nothing has been spared to make the knife as strong, beautiful and comfortable as possible. The knife is a pleasure to look at and a thrill to use. The blade is made of laminated VG10 steel, where the edge is made of our now renowned VG10 steel and the sides consist of tough, all-stainless 420J2 steel. This combination is good since it brings together all conceivable and desirable properties such as resilience, resistance to torque and edge-durability in a single blade. A 7 mm (0.28″) thick blade in itself would be strong enough for most tasks – with laminate technology one can expect an additional 20% strength in the form of resistance to bending, as compared to an ordinary VG10 blade.Everyone who has used a chopper knows that it is designed for heavy use, which makes great demands on the blade and handle. Our handle consists of specially selected oxhide: sadly a material that is usually overlooked by manufacturers, but which gives a sure and rugged grip. It ages beautifully and as the years pass it acquires an attractive brown patina, and it is unaffected by oil and solvents and impervious to water. Dryness might cause small cracks on the handle but they disappear when the knife is put to use again.We are persisting with the convex edge, since we consider this to be the ultimate combination of cutting performance and edge strength, and of course our NL1 Thor knife features this. Anyone who knows anything about knife making knows that such an edge can only be made by hand, and that’s why 99.99% of all knives don’t have that kind of edge. Knives in general are of course mass produced, where CNC (Computer Numerically Controlled) robots and grinders shape the blades as best they can. The machines are loaded with stacks of blades so that production can go on 24 hours a day and the result is quite often really good – good knives at affordable quotes. However, if you want top-drawer strength, corrosion-resistance, edge durability and design, the machine hasn’t been made that can come even close to the craftsmanship of a trained, skilled knifesmith. Therefore, we take great pride in being able to present the first model in our Northern Lights Series – the NL1 Thor, well aware of that only the most quality-conscious will appreciate its assets. It felt natural to give this chopper the name of the Aesir’s strongest and most powerful god, the ruler of the Aesir’s domicile, Asgard, the strong, red-bearded god of thunder – Thor.
Blade steel: Lam. VG10
Hardness (HRC): 59
Sheath: Leather
Weight (knife): 520 grams
Handle material: leather
Blade length: 25.4 cm
Blade thickness: 7 mm
Total length: 38.5 cm
Coating: Satin Finish
Note: Delivery from September 2018 with new, improved leather sheath (see second picture)