Legacy Arms

Anglo-Saxon Scramasax

A scramseax (also scramsax, scramseaxe, scramaseax, scramasax, scramaseaxe and sometimes referred to as simply scram, seax or sax) was a type of Germanic single-edged knife. Scramseax seem to have been used for warfare and as a tool. They occur in a size range from 2.9" to 29.5". The larger ones (langseax) were probably weapons, the smaller ones (hadseax) tools, intermediate sized ones serving a dual purpose. Wearing a scramseax may have been indicative of freemanship. The scramseax was worn in a horizontal sheath at the front of the belt. Scram refers to food and seax to a blade (so, "food knife"). There is some debate about the authenticity of the longer word scramseax. The Saxons may have derived their name from seax (the implement for which they were known) in much the same way that the Franks were named for their francisca. This claim is largely supported by the appearance of scramaseaxes in early Saxon heraldry. The Generation2 version is based off a 6th century version. The Blade is 5160 tempered carbon steel with a darkwood handle. The tang is peened over top the metal end cap of the handle. A hand stiched Leather scabbard is included. This dagger comes with a sharp blade. Blade length: 12 1/2" Overall length: 19 1/8" Balance Point: 1 1/2" Below steel band. Weight: 1 lbs. 4 oz.

€174.90*

this item is in stock

"Maintz" Roman Gladius Sword

Another winning Generation 2 design. Most Early versions of the Roman Gladius were wasp waisted with a long point that combined cutting power and stabbing ability in one handy weapon. Early Roman Swords from the first century b.c. display a 'waisting' of the blade to improve balance and a long, narrow point. Even later versions (like the Pompeii pattern) were not waisted and also had a shorter point but were just as effective - and easier to make. Both swords served side-by-side for many years and it was not uncommon to find 4th century Legionnaires carrying either models. The gladius is known as "the sword that conquered the world". It features a full tang construction, high carbon blade, hard wood handle. High polished steel spacer at the bottom of the handle for strength and durability. A leather scabbard is included. Blade length: 21" Handle/Hilt length: 8-1/4" Overall: 29-1/4" Balance Point: 2-1/2" Below Hilt Weight: 2-1/2 lbs

€279.00*

this item is in stock

Halfling Sword

The Generation 2/Legacy Arms Halfling Sword is a short sword featuring a hand made, forged, and tempered 5160 high carbon steel blade. Blade and all metal parts are hand polished to a high finish. The handle of the swords feature Madagascar Ebony hardwood and the famous Generation2/Legacy Arms fit & finish. We also included a scabbard so you can carry this GREAT Small sword. It is a hardwood scabbard wrapped in black leather with steel accents. Key Features: full tang construction high carbon blade scabbard included SPECIFICATIONS Overall: 22" Blade Length: 15" Handle Length: 6" Weight: 2 lb Point of Balance: 1/2" Blade Steel: 5160 Specs will vary slightly from piece to piece.

€279.00*

this item is in stock

Roman Gladius

A classic Imperial Roman short sword, named for where an original was found in the ruins of Pompeii (reliably dating from 79 CE). Although the Pompeii blade is double edged, it does not have the distribution of mass to make it an efficient cutting sword. Our version features a full tang construction, high carbon blade, hard wood handle. High polished steel spacer at the bottom of the handle for strength and durability. A leather scabbard is included. Blade length: 22" Handle/Hilt length: 7.5" Overall: 29.5" Balance Point: 4.25" Below Hilt Weight: 1,02 kg.

€279.00*

this item is in stock

Knights Templar Crusader Dagger

The First Crusade was launched in 1095 by Pope Urban II with the dual goals of liberating the sacred city of Jerusalem and the Holy Land from Muslims and freeing the Eastern Christians from Muslim rule. The Second Crusade was launched in 1147 under the Kings Louis VII and Conrad III respectively, but failed to win any major victories, launching a failed pre-emptive siege of Damascus, an independent city that would soon fall into the hands of Nur ad-Din, the main enemy of the Crusaders .The Third Crusade was issued by Gregory VIII in 1187, after Jerusalem had been recaptured by the armies of Islam under Saladin. Philip and Richard with their armies, departing only in July, 1190, crossed the sea and, after stops at Sicily and Cyprus, landed at Acre—Philip in April and Richard in June—where they joined the siege, and the city surrendered in July, 1191. Philip departed for France in August, leaving Richard in control. The terms of the surrender of Acre included a prisoner exchange and the return, by Saladin, of the True Cross, which he had captured with Jerusalem in 1187. Gen 2 used the 12th Century dagger to make this dagger because of its simple cruciform design and also because it was used by many European countries. Details: Blade length: 38 cm Handle/Hilt length: 18 cm Overall: 49,5 cm Balance Point: At Cross guard Weight: 705 g

€169.00*

this item is in stock

Viking Sword from the River Witham

Viking Sword - Tenth Century A.D. - The original sword was dredged up from the river Witham. "This sword is one that I have wanted to copy for years. There have been several attempts, but none have completely satisfactory. Adequate, yes, but not truly satisfying. At least until this one. Several years ago I had the chance to visit Sweden and Gotland to look at Viking artifacts as well as the remains from the Battle of Visby. One thing that I noticed, but have not encountered in any works on the Viking sword, is that the Swedish swords all seem to be a bit large than those I saw in Norway and Denmark. Of course it could have been just luck that the ones I saw in Sweden were larger, I have no way of knowing. But this sword could easily qualify as a Swedish sword. The blade is 77.8 cm, and is slightly over 6cm wide, and the balance point is about 16 cm. from the grip. This is a true warrior´s sword, the weight is about 3 pounds, but the balance is superb. The cutting power of the sword is quite impressive and I can easily see it being wielded by Skarp-Hedin or Egil Skallagrimson. Hand forged, high carbon steel." Hank Reinhardt The blade of this sword is hand forged from 5160 carbon steel and hand tempered. The pommel and cross guard is also solid carbon steel with copper diamond inlays, then highly polished. The handle is wood wrapped in leather. Sword also includes a wood scabbard wrapped in leather with steel accents at throat and tip. Includes an 11"x17" Signed copy of drawing from Hank Reinhardt with each sword ordered. This sword features polished steel pommel and crossguard with Copper Diamonds. Wood handle wrapped in suede for a comfortable grip. Full wide tang that is peened over top of the pommel.This sword comes with a sharp blade. Measurements: Blade length: 30 1/2" Blade Width near hilt: 2 1/12" Blade Width near tip: 1 5/16" Blade Thickness near hilt: 1/4" Blade Thickness near tip: 3/32" Handle/Hilt length: 6 3/4" Grip Length: 3 7/8" Overall: 37 1/4" Balance Point: 5.50" Below Hilt COP is 11.75 inches from the tip, 19 inches from the guard. Weight: 3 lbs. 7,5 oz.

€369.00*

this item is in stock

Irish Hand and Half Sword

Irish hand and a half sword dating from around 1475 - 1525 A.D. It features a full tang construction and a high carbon blade that is flexible and strong. The handle features a high polished steel cross guard and characteristic ring pommel with leather wrapped handle. This sword is light and quick for it's size.A wood scabbard that is wrapped in leather with steel band at the throat and steel tip is included.It features the high quality fit and finish that has been known for all Legacy Arms swords. The blade is 34 3/4" high carbon spring steel with a hefty full tang. Specifications: Overall: 46" Blade Length: 34 3/4" Handle Length: 11 1/2" Weight: 3 lb 4 oz Point of Balance: 3 1/2" Width at Guard: 35.6mm Thickness at Guard: 1.5mm Blade Steel: 5160 Specs will vary slightly from piece to piece.

€429.00*

this item is in stock

Ranger Battle Sword Companion Dagger

Now this is the companion dagger for the Ranger Battle Sword # 3261 from Generation 2. This dagger is light, fast and super sharp. Blade Length: 10" Handle Length: 6 3/4" Overall: 16 3/4"

€179.00*

this item is in stock

Hand and a half Sword

Irish hand-and-a-half sword. The Generation 2 design, upgraded to Steel-to-Steel capability. Dating around 1475 - 1525 A.D. It features a full tang construction, high carbon blade that is flexible and strong. High polished steel cross guard and pommel, leather wrapped handle. This sword is sharp, light and quick. A leather scabbard is included.The matching dagger has the item number 13240. Total: 116.84 cm Blade length: 87.63 cm Handle length: 29,21 cm Weight: 1,58 kg Balance point: 8,89 cm Blade steel: 5160

€359.00*

this item is in stock

Crusader Companion Dagger

The new Crusader companion dagger matching the sword #13146. We have been debating and yes even procrastinating, but the majority over-ruled. So now after much patience (on our customers part) we have created the Crusader dagger. This very light piece is made just like our popular sword and will go well with the sword you have. Blade length: 12.5" Handle/Hilt length: 7" Overall: 19.5" Balance Point: At Cross guard Weight: 1 lbs. 9 oz.

€169.00*

this item is in stock

Legacy Arms Hospitaller Sword - designed by Bruce Brookhart

Reminiscent of a time when honor, courage and loyalty along with vows, oaths and duty were bound to flesh and enforced in steel. Hold the Brookhart Hospitaller Sword and Dagger in your hands and allow your spirit to be whisked away to Jerusalem in the 11th century. The embossed cross on your sheath shows your pledge to the Hospitaller knights donning a back surcoat with a white cross on the chest. Well balanced, the 33 1/4" high carbon steel blade thrusts easily on foot or from horseback while the fuller lightens the blade for swift cuts while weaving your blade in combat. Counter balanced by the solid round steel pommel, the textured leather handle becomes one with your body and extension of your will. The arched hilt and quillons are classic in design of this type of cruciform sword and appropriate for kneeling in prayer. The accompanying Hospitaller Dagger complements the sword nicely while the 12 3/4" high carbon steel blade makes for a deadly close-quarters weapon. Both sword and dagger are concealed in black leather wrapped wood core sheaths for secure carry. Each piece represents a symbol of your fidelity to the order and the oath to protect the innocent, punish the wicked and help the ailing. About the Knights Hospitaller The Knight Hospitallers are the third of the best know Monastic Orders that fought in the Holy Lands. The Cistercian order wore a Black Surcoat with a White Cross centered. Founded as a healing order, they could often fill the position of a battlefield medic. After the ranks of the Knight Templers were decimated, at least in the Holy Land, at the Battle of Hattin, the Hospitallers stepped in to shore-up Richard the Lionhearts forces during the Third Crusade. This was fortuitous for King Richard in as much as King Phillip II of France fell-out with Richard and withdrew from the Crusade after the Battle of Acre. Key Features: • 5160 High Carbon Steel Blade • Traditional Thru-tang Peened Construction • Blackened Cruciform Hilt and Pommel Details: Overall: 40 1/2" Blade Length: 33 1/4" Handle Length: 4 5/8" Weight: 3lbs 2oz Point of Balance: 6 1/2" Blade Steel: 5160

€364.90*

this item is in stock

Feast Knife

Feast Knife by Legacy Arms (Generation 2). As a re-enactor it is difficult to find a good quality multi-purpose dagger. This excellent little Medieval Feast Dagger is perfect for carrying at events. It features a forged high carbon spring steel blade and beautiful hardwood handle. Designed for feast or those little "around the camp" tasks that pop up. A Leather scabbard with belt loop is included. Details: Blade Length: approx. 11.5 cm Overal Length: approx. 24 cm

€49.90*

Item is normally available in about 4-6 weeks.

Knights Templar Crusader Sword

Gen 2 decided to copy the 12th century sword which had a simple cruciform design that made it historically popular for many years. From 900-1600 A.D it was used throughout many European countries. Due to this sword´s length ist is suitable for both, ground fighting and use from horse backs. The Knights Templar Crusader Sword features a full hefty tang. The blade has been made of high carbon spring steel. Pommel and guard are made of polished steel. The pommel features the red cross of the Knights Templar. This sword comes with a sharp blade. Details: Total length: 43" Blade length: 34.5" Blade thickness: 3/16" Handle/Hilt length: 8.5" Balance Point: 5" below hilt Weight: 1400 g

€364.90*

Item is in field warehouse, long distance shipping.

Excalibur Sword

The legendary sword of King Arthur, son of Uther and Igrain. The legend has it that it was magically embedded in a stone and only the truest of knights could remove it and so be king. Excalibur served Arthur well until his great battle with his arch enemy Mordred (who just happens to have also been his son), the culmination of which saw the great sword returned to the Lady of the Lake. This sword features a full tang construction, the blade has been made of strong high carbon steel and is sharp. The handle is wooden with a stainless steel, twisted wire chain wrapping. Crossguard and pommel have been made of solid brass and are highly polished. A hardwood scabbard wrapped in leather with brass accents is included in delivery. + Details: Total length: 44 1/2" Blade length: 34" Weight: 3 1/2 lbs.

€569.00*

Item is normally available in about 4-6 weeks.

Brookhart Teutonic War Axe

The Generation 2/Legacy Arms Teutonic (German) War Axe - Designed by Bruce Brookhart is a German style axe capable of heavy blows to helms, shields and limbs. Sharpened tempered head is double pinned to a hardwood shaft with a tacked leather grip and steel butt cap. Key Features: high carbon blade hardwood shaft SPECIFICATIONS Overall: 27 1/2" Blade Length: 7" x 6" Weight: 3 lbs. 16 oz. Blade Steel: 5160 Specs will vary slightly from piece to piece.

€239.90*

Item is normally available in about 4-6 weeks.

Roman Gladius Sword

Legacy Arms classic Imperial Roman Gladius (or short sword) mimics an original found in the ruins of Pompeii (reliably dating from 79 CE). Features a double edged high carbon blade, hard wood handle & high polished steel spacer at the bottom of the handle for strength and durability. Sword also includes a wood scabbard wrapped in black leather with steel accents at throat and tip. Specifications Overall: 29 1/2" Blade Length: 22" Handle Length: 7 1/2" Weight: 1.14 Point of Balance: 3 1/2" Blade Steel: 5160 Specs will vary slightly from piece to piece.

€299.00*

Im Außenlager, Langstreckenversand - in 12-14 Tagen bei Dir zu Hause

Celtic Anthromorphic Sword

This Celtic Sword responds to the customers demands created by the popularity of Celtic reenactment. The anthropomorphic hilt and leaf-shaped blade epitomize the weapons of the warrior race, as demonstrated by many surviving originals. Solid steel hardware, complemented by a Macassar Ebony grip and leather scabbard make this piece ideal for the Celtic persona. This sword has a real FULL TANG! This sword comes with a sharp blade. Blade Length: 23 1/4" Overall: 30 3/4" Weight: 3 lbs. !

€299.00*

Item is normally available in about 4-6 weeks.

Ranger Battle Sword

Our goal? To come out with a more economical line. The line (Pro Sword) will feature our same quality but will be more simple in design and yes more affordable. We know how the economy has put a strain on pocketbooks, so we are once again meeting the needs of the customer. Ranger Battle Sword from Pro Sword - Handmade, forged, and tempered 1060 high carbon steelo Blade and all metal parts are hand polished to a high finish o Full length fuller o 2" Ricasso (a non- sharpened thick part of the blade edge extending from the guard area; this feature adds extreme strength to the critical blade base) o The handle of the sword features leather wrapped hardwood o The scabbard is also hardwood wrapped in leather o And the famous Generation2 & Last Legend fit - finish, and their real Full Steel Blade Tang o The Ranger Battle sword was an idea of one of Last Legend's retailers. They're battle ready without compromise. Blade Length: 34" Handle Length: 13" Overall: 47" Weight: 3 lbs. 12 oz. Balance Point: ¼"

€409.00*

Item is normally available in about 4-6 weeks.

Scottish Sgian Dubh

The Sgian Dubh (pronounced "skee(a)n doo") is a ceremonial dagger (Gaelic sgian) worn as part of the modern Scottish Highland dress along with the kilt. It is worn tucked into the hose with only the pommel visible. The name comes from the Gaelic meaning "black knife," where "black" may refer to the usual colour of the handle of the knife. It is also suggested that "black" means secret, or hidden, as in the word blackmail. This Generation 2 / Legacy Arms version is based on the stories and theories surrounding the knife's origin and the meaning of "Dubh" in Gaelic. Legacy Arms has made one that is simple in design and fits perfectly in your hose (or sock). The handle is made from an iron wood and features a tempered blade with a full tang peened at the top of the handle. A wood sheath wrapped in leather is included. Specifications: Overall: 6 7/8" Blade Length: 3 1/4" Handle Length: 3 1/2" Weight: 3oz Width at Guard: 19.6 mm Thickness at Guard: 0.7 mm Thickness at Tip: 0.7 mm Blade Steel: 5160 Specs will vary slightly from piece to piece.

€69.00*

Item is in field warehouse, long distance shipping.

Black Prince Sword

Black Prince Sword - Late 14th century Hand and a Half Sword - The original sword, which rests in a private collection in England, is thought to possibly be the sword of Edward the Black Prince. The Black Prince, son of Edward III and father of Richard II, was known as a great warrior. The sword was removed from its resting place during the English Civil War, Cromwell being blamed for its disappearance. This design features a distilled taper 33 1/4" high carbon steel blade with strong tang that is peened over top the pommel. The handle is hard-wood then wrapped in leather. The cross guard and pommel are solid steel. Making this a very light feeling and balanced sword. This sword features an adjustable scabbard, a hardwood scabbard wrapped in leather which is completely adjustable to fit your needs. A unique design as well as very functional for the few owners that possess one. Blade length: 33 1/4" Handle/Hilt length: 10" Overall: 43 1/4" Balance Point: 5 1/4" Below Hilt Weight: 3 3/4 lbs.

€364.90*

Item is normally available in about 4-6 weeks.

Brookhart Templar Axe

The Generation 2/Legacy Arms Templar Horseman's War Axe -Designed by Bruce Brookhart is an axe capable of fast devastating blows.Sharpened tempered head and full back spike is double pinned to a curved hardwood shaft with a tacked leather grip, with leather loop. Details: Key Features: high carbon blade hardwood shaft SPECIFICATIONS Overall: 66 cm Blade Length: 19 cm x 23,5 cm Blade Steel: 5160 Specs will vary slightly from piece to piece.

€239.90*

Item is normally available in about 4-6 weeks.

Celtic Falcata Sword

A Generation 2 favorite. Steel grip. Steel single edge blade, curved and broader towards the point. Used by the Celt-Iberians of Roman times. It was described as one of the most devastating swords the Romans ever went against. Our Falcata is the only one that comes both with a sharp edge and with a scabbard! Blade length: 20.5" Handle/Hilt length: 6.0" Overall: 26.5" Balance Point: 4.5" Below Hilt Weight: Under 3.5 lbs.

€279.00*

Item is in field warehouse, long distance shipping.

Twisted handle Scottish Dirk

The early Scottish dirk was a direct descendent of the medieval ballock dagger. The grip form began to change, probably sometime in the 16th century, but soon developed a form that was purely Scottish. The later versions that are quite popular, are somewhat debased in form, and not the pure fighting weapon of the early version. And make no mistake about it... this dirk was a pure fighting knife, and unabashedly so. The Generation2 version is made from a 1 piece solid handle hand carved to look like twisted wood, with brass accents. The blade is made from 5160 tempered carbon steel, fully tanged. The scabbard is wood wrapped in leather. This dagger comes with a sharp blade. Blade length: 12" Overall length: 18 1/4" Balance Point: At Ricasso Weight: 1 lbs. 8.5 oz.

€174.90*

Item is normally available in about 4-6 weeks.

Roman Maintz Gladius Schwert

Most early versions of the Roman Gladius were wasp waisted with a long point that combined cutting power and stabbing ability in one handy weapon. Some of the later versions were made with a straighter blade, but still with the long point. Even later versions (like the Pompeii pattern), were not waisted and also had a shorter point, but were just as effective and easier to make. Both swords served side-by-side for many years, and it was not uncommon to find 4th century Legionnaires carrying either models. The gladius is known as "the sword that conquered the world". This version features a high carbon blade, hard wood handle and a high polished steel spacer at the bottom of the handle for strength and durability. The sword also includes a wood scabbard wrapped in black leather with steel accents at throat and tip. Our new version of Maintz Gladius features a reduced handle radius for a better grip. Also, we've redesigned the handle and blade lengths for better balance and handling. Please note that the wood grains and tones will vary from sword to sword. The scabbard has also been improved with a stainless accoutrements and a sewn leather wrap. Specifications Overall: 74.6 cm Blade Length: 52.7 cm Handle Length: 17.78 cm Weight: 0.9 kg Thickness at Guard: 5mm Thickness at Tip: 1.5mm Blade Steel: 5160 Handle Material: Wood

€349.00*

Im Außenlager, Langstreckenversand - in 12-14 Tagen bei Dir zu Hause

Witham Viking Seaxe Knife

(History of the Seax Knife)A scramseax (also scramsax, scramseaxe, scramaseax, scramasax, scramaseaxe and sometimes referred to as simply scram, seax or sax) was a type of Germanic single-edged knife. Scramseax seem to have been used for warfare and as a tool. They occur in a size range from 7.37 cm to 74.93 cm. The larger ones (langseax) were probably weapons, the smaller ones (hadseax) tools, intermediate sized ones serving a dual purpose. Wearing a scramseax may have been indicative of freemanship. The scramseax was worn in a horizontal sheath at the front of the belt. Scram refers to food and seax to a blade (so, "food knife"). There is some debate about the authenticity of the longer word scramseax. The Saxons may have derived their name from seax (the implement for which they were known) in much the same way that the Franks were named for their francisca. This claim is largely supported by the appearance of scramaseaxes in early Saxon heraldry. The Generation2 version is based off a 10th century version drawing given to us by Hank Reinhardt. And if you notice it is a nice match to the Witham Viking Sword. The Blade is 5160 tempered carbon steel with a wood handle, wrapped in brwon leather. The tang is peened over top the metal end cap of the handle. A hand stiched Leather scabbard with belt hanger is included. Details: Blade length: 30.80 cm Overall length: 43.82 cm Balance Point: 4.45 cm below steel Guard Weight: 408.24 g

€189.00*

Item is in field warehouse, long distance shipping.

8th Century Viking Sword

This Viking Sword is fashioned after an 8th century design. The beautiful sword has a highly polished blade with fuller, a dark hardwood handle and comes with a polished solid steel pommel and cross guard. It has a full tang that is peened over top of the pommel. A wooden scabbard wrapped in leather with steel accents is included. This sword comes with a sharp blade. Details: Blade length: 31"Total length: 38 3/4" Weight: 3 lbs. 7 oz. Balance Point: 3 3/4" below hilt

€379.00*

Item is normally available in about 4-6 weeks.

Knight's Riding Sword

According to Ewart Oakeshott. "Records of the Medieval Sword", page 151;An identical one is shown on two early 14th century effigies in Germany. (i), of Arnold I Langraph of Cleve, + 1320 in Stiftskirche at Cleve, and (ii), of one of the hero-figures, c. 1308, in the Rathaus at Cologne. Not only are hilts of the swords on these figures exactly the same as this sword, but the size is too,, more proof (if any more is needed, which it shouldn't be) that these short swords were not made for boys, or archers etc., but for knights and in this case, great nobles.The blade of this sword is hand forged from 5160 carbon steel and hand tempered. The blade is then securely peened at pommel. The handle is wood wrapped in black leather. Sword also includes a wood scabbard wrapped in black leather with steel accents at throat and tip. SPECIFICATIONS Overall: 28 1/2" Blade Length: 21" Handle Length: 5 1/5" Weight: 2 lbs 4 oz Width at Guard: 1.9" Width at Tip: 1" Thickness at Guard: 6mm Thickness at Tip: 3.5mm Blade Steel: 5160

€349.00*

Item is in field warehouse, long distance shipping.

Legacy Arms Teutonic War Sword - designed by Bruce Brookhart

Although the Militant Order is well known for their activities in the Holy Land, both branches continued to be the powerful first of the Germanic kingdoms for several centuries. Even called upon to meet the Mongol hordes when they crossed the frozen Dandube River in 1241 at the battle of Leibnitz. Later they destroyed the sun worshipers in Lithuania when the Pope called the final Crusade against them. The blade of this sword is hand forged from 5160 carbon steel and hand tempered. The blade is then securely peened at pommel. The handle is wood wrapped in black leather. Sword also includes a wood scabbard wrapped in black leather with steel accents at throat and tip. Key Features: • full tang construction • high carbon blade • solid steel cross guard and pommel Details: Overall: 44 7/8" Blade Length: 36" Handle Length: 6 3/8" Weight: 3lb 14oz Point of Balance: 6 1/2" Width at Guard: 1 7/8" Blade Steel: 5160

€364.90*

Item is in field warehouse, long distance shipping.

Halfling Sword

The Legacy Arms Halfling Sword is a short sword featuring a hand made, tempered 5160 high carbon steel blade. The blade, pommel and guard, along with the sheath accutrements are a matte steel finish.It is a hardwood scabbard wrapped in black leather with steel accents. Specifications Overall: 22" Blade Length: 15" Handle Length: 6" Weight: 1 lbs 11oz Point of Balance: 1/2" Thickness at Guard: 5.4mm Thickness at Tip: 2mm Blade Steel: 5160 Handle Material: Wood Specs will vary slightly from piece to piece.

€329.00*

Item is in field warehouse, long distance shipping.

Legacy Arms Templar Sword - Designed by Bruce Brookhart

First formed as "THE POOR KNIGHTS OF CHRIST" to guard the passage of Pilgrims on the route to the Holy Land, they took as their symbol two knights mounted on a thin horse. After the fall of Jerusalem to Christen forces in the First Crusade they took the Temple as their headquarters and the militant Monastic Order called themselves "THE POOR KNIGHTS OF THE TEMPLE OF JERUSALEM", which was soon shortened by others to simply "THE KNIGHTS TEMPLAR". These deeply devoted Monks were known as fierce fighters when pitted against the "Infidels" of the region. Fighting below a pure white banner to represent their purity and chastity or a white banner with the upper quarter black to also show the frailty of man, the Order grew into a powerful force across all of Europe. The blade of this sword is hand forged from 5160 carbon steel and hand tempered. The blade is then securely peened onto the pommel. The contoured handle is wood, wrapped in black leather. This sword also includes a wood scabbard wrapped in brown leather with brass accents at the tip. Key Features: • full tang construction • high carbon blade • solid steel cross guard and pommel Details: Overall: 38 7/8" Blade Length: 31 7/8" Handle Length: 4 1/2" Weight: 3 lbs 11oz Point of Balance: 4" Width at Guard: 2" Blade Steel: 5160

€364.90*

Item is normally available in about 4-6 weeks.

Knights Riding Sword

According to Ewart Oakeshott an identical one is shown on two early 14th century effigies in Germany. Hilt and size of these swords have been replicated. These swords were not made for boys or archers, but for knights and great nobles. Details: Total length: 29" Blade length: 21" Blade width: 2" at guard, 1 1/2" at fuller end toward tip Handle length: 7 5/8" Grip length: 5 1/4" Balance Point: 1 7/8" below hilt Weight: 2 lbs. 5 oz.

€299.00*

Item is normally available in about 4-6 weeks.

Scottish Sgian Dubh

The Sgian Dubh (pronounced "skee(a)n doo", is a ceremonial dagger (Gaelic sgian) worn as part of the modern Scottish Highland dress along with the kilt. It is worn tucked into the hose with only the pommel visible. The name comes from the Gaelic meaning "black knife", where "black" may refer to the usual colour of the handle of the knife. It is also suggested that "black" means secret, or hidden, as in the word blackmail. This is based on the stories and theories surrounding the knife's origin and the meaning of "Dubh" in Gaelic. Now Generation 2 has made one that is simple in design and fits perfectly in your hose (or sock). The handle is made from an Iron Wood and features a tempered blade with a full tang peened at the top of the handle. A wood sheath wrapped in leather is included. Details: Blade Length: 8 cm Overall: 16 cm Weight: 1100 g

€49.90*

Item is normally available in about 4-6 weeks.

Legacy Arms Hospitaller Dagger - designed by Bruce Brookhart

€174.89*

Item is in field warehouse, long distance shipping.

Legacy Arms Templar Companion Dagger - by Bruce Brookhart

First formed as "THE POOR KNIGHTS OF CHRIST" to guard the passage of Pilgrims on the route to the Holy Land, they took as their symbol two knights mounted on a thin horse. After the fall of Jerusalem to Christen forces in the First Crusade they took the Temple as their head quarters and the militant Monastic Order called themselves "THE POOR KNIGHTS OF THE TEMPLE OF JERUSALEM", which was soon shortened by other to simply "THE KNIGHTS TEMPLAR". These deeply devoted Monks were known as fierce fighters when pitted against the "Infidels" of the region. Fighting below a pure white banner to represent their purity and chastity or a white banner with the upper quarter black to also show the frailty of man, the Order grew into a powerful force across all of Europe. The blade of this dagger is hand forged from 5160 carbon steel and hand tempered. The blade is then securely peened onto the pommel. The contoured handle is wood, wrapped in black leather. This dagger also includes a wood scabbard wrapped in brown leather with brass accents at the tip. Key Features: • full tang construction • high carbon blade • wood core scabbard included Details: Overall: 19 1/2" Blade Length: 14" Handle Length: 5 1/2" Weight: 1lb 4oz Blade Steel: 5160

€174.90*

Item is normally available in about 4-6 weeks.

12th Century Dagger

The Legacy Arms 12th Century Dagger is the companion to the 12th Century Sword and has many of the same features.It features a hardwood handle wrapped in leather. The cross guard and pommel are solid steel, polished and fitted onto a full tang that is peened at top of the pommel for strength and durability in the same fashion as most original swords.The scabbard is made from wood then wrapped in leather. Specifications Overall: 19.5" Blade Length: 12.5" Handle Length: 7" Weight: 1 lbs 8 oz Point of Balance: At Cross guard Blade Steel: 5160 Specs will vary slightly from piece to piece.

€169.00*

Item is normally available in about 4-6 weeks.

Irish Dagger

The Irish Hand and a Half Dagger is the companion dagger to the Irish Hand and a Half Sword. It is a light, well-balanced dagger and is made just like our popular Irish Hand and a Half Sword, but will go well with any sword you have.Featuring a full tang construction and high carbon blade. This dagger displays a highly polished steel cross guard and characteristic ring pommel with a 6" black leather wrapped grip.A wooden scabbard wrapped in black leather with steel band at the throat and steel tip is included. Details: full tang construction high carbon blade polished steel cross guard and pommel Overall: 19" Blade Length: 11 1/4" Handle Length: 7 1/2" Weight: 1lb 8oz Width at Guard: 1.23" Width at Tip: .73" Thickness at Guard: .19" Thickness at Tip: .10" Blade Steel: 5160 Specs will vary slightly from piece to piece.

€199.00*

Item is in field warehouse, long distance shipping.

Legacy Arms Teutonic War Companion Dagger - by Bruce Brookhart

Although the Militant Order is well known for their activities in the Holy Land, both branches continued to be the powerful first of the Germanic knigdoms for several centuries. Even called upon to meet the Mongol hordes when they crossed the frozen Dandube River in 1241 at the battle of Leibnitz. Later they destroyed the sun worshippers in Lithuania when the Pope called the final Crusade against them. The blade of this dagger is hand forged from 5160 carbon steel and hand tempered. The blade is then securely peened onto the pommel. The contoured handle is wood, wrapped in black leather. This dagger also includes a wood scabbard wrapped in black leather with steel accents at the throat and tip. Key Features: • full tang construction • high carbon blade • wood core scabbard included Details: Overall: 17 1/2" Blade Length: 12" Handle Length: 4" Weight: 1 lbs Point of Balance: Right Below Hilt Width at Guard: 1 1/2" Blade Steel: 5160

€174.90*

Item is in field warehouse, long distance shipping.

12th Century Sword

A well known leading expert on medieval swords comments that the original could be from as early as 1100 to as late as 1250. And we trust that he should know. The pommel, a faceted wheel, is a shape encountered in the Leppaho Viking swords, a group of swords excavated from Viking graves dating from 980-1000. The crossguard is of an early form, which the Vikings referred to as Gaddhjalt [spike hilt]. The blade is designed for the cutting style of fighting used during this period and has a fuller running 2/3 the length of the blade. This version features: A hardwood handle, wrapped in leather. The cross guard and pommel are solid steel, polished and fitted onto a full tang that is peened at top of the pommel for strength and durability. And is how many of the originals were fitted. The scabbard is made from wood then wrapped in leather with a solid steel end cap. This sword comes with a sharp blade. Blade length: 34.5" Handle/Hilt length: 5.9" Overall: 43" Balance Point: 5.5" Below Hilt Weight: 3 lbs. 6 oz.

€364.90*

Item is normally available in about 4-6 weeks.

Templar Knight Sword

Knights Templar or the Order of the Temple (French: Ordre du Temple or Templiers), were among the most famous of the Western Christian military orders. The organization existed for approximately two centuries in the Middle Ages. It was founded in the aftermath of the First Crusade of 1096, to ensure the safety of the many Europeans who made the pilgrimage to Jerusalem after its conquest.Officially endorsed by the Roman Catholic Church in 1129, the Order became a favored charity across Europe and grew rapidly in membership and power. Templar knights in their distinctive white mantles with red cross were among the best fighting units of the Crusades. Non-combatant members of the Order managed a large economic infrastructure throughout Christendom, inventing or adapting many financial techniques that were an early form of banking, and building many fortifications across Europe and the Holy Land.The Templars' success was tied closely to the Crusades; when the Crusaders suffered defeat and lost the Holy Land, support for the Order faded. Rumors about the Templars' secret initiation ceremony created mistrust, and King Philip IV of France, deeply in debt to the Order, began pressuring Pope Clement V to take action. In 1307, King Philip had many of the Order's members in France arrested, tortured into giving false confessions, and burned at the stake. In 1312, Pope Clement V, under continuing pressure from King Philip, disbanded the Order. The abrupt disappearance of a major part of the European infrastructure gave rise to speculation and legends, which have kept the "Templar" name alive until the present. SPECIFICATIONS Overall: 42 1/2" Blade Length: 34 1/2" Handle Length: 6" Weight: 2 lbs 15 oz Point of Balance: 6" Thickness at Guard: 5.7mm Thickness at Tip: 4mm Blade Steel: 5160

€429.00*

Item is in field warehouse, long distance shipping.

Excalibur - The Sword of Power

Excalibur Sword - The legendary sword of King Arthur son of Uther and Igrain. The Legend has it that it was magically embedded in a stone and only the truest of knights could remove it, and so, be king. Excalibur served Arthur well until his great battle with his arch enemy Modrid (who just happens to have also been his son), the culmination of which saw the great sword returned to the Lady of the Lake. Could you be the next Arthur? Now we're not saying that we were able to make a deal with the Lady of the Lake, but if your wife or girlfriend is named Guinevere, just imagine the possibilities. Our new and refined Legacy Arms Excalibur Sword keeps all the accoutrements of the original but we've honed the specifications to where its a better balanced and usable sword. The blade is made of strong high carbon steel with a peened through tang. The handle is wood core with a beautiful stainless steel twisted wire wrapping. The new 8" wire grip has been greatly reduced in diameter and flattened (32mm x 21mm) for better and well-balanced handling. The cross guard and pommel are made of plated stainless to avoid corrosion. A hardwood scabbard wrapped in leather with brass accents is included. Specifications Overall: 44 1/2" Blade Length: 32 1/2" Handle Length: 10" Weight: 3lbs 2oz Point of Balance: 3 1/2" Width at Guard: 2" Thickness at Guard: 6mm Thickness at Tip: 2mm Blade Steel: 5160 Handle Material: Wire-wrap Specs will vary slightly from piece to piece.

€679.00*

Im Außenlager, Langstreckenversand - in 12-14 Tagen bei Dir zu Hause