10% discount on all products from United Cutlery

Paul Chen / CAS Iberia is globally renowned for its high-quality, authentic replicas of historical swords. Manufactured by Hanwei, these swords blend traditional craftsmanship with modern production techniques, offering katanas, European swords, and combat blades of exceptional quality. Paul Chen has earned a reputation for creating masterful blades for collectors, martial artists, and reenactors.

At Swords-and-more, you’ll find a vast selection of Paul Chen swords, from razor-sharp cutting blades to decorative masterpieces.

Paul Chen / CAS Iberia

Red Tassel - small
This red tassel is designed for Taiji and Gongfu swords, and will match any such swords in our collection.

€13.90*
Ensure 14 bonus points

this item is in stock

Wallhanger Black finish
This steel Katana hanger provides an economical and sturdy solution for displaying any Japanese-style sword on a wall. Supplied in black powder-coated finish, the hanger can be arranged to display the sword either horizontally or at an angle and is supplied with mounting. It has plastic-covered hooks, to avoid damage to Saya finishes. Simple and unobtrusive, this hanger is designed to focus attention on the piece being displayed. delivered will be one pair Made by Hanwei.

€13.90*
Ensure 14 bonus points

this item is in stock

Replacement Sabre Blade
This replacement blade is suitable for the Pecoraro and Radaelli Sabres and has been made of flex-tempered high carbon steel. Details: Blade length: 40 1/4" Weight: 8 oz. This replacement blade fits item #13166, #13167 und #13168.

€129.90*
Ensure 130 bonus points

this item is in stock

Wallhanger Nickel finish
This steel Katana hanger provides an economical and sturdy solution for displaying any Japanese-style sword on a wall. Supplied in nickel-plated finish, the hanger can be arranged to display the sword either horizontally or at an angle and is supplied with mounting. It has plastic-covered hooks, to avoid damage to Saya finishes. Simple and unobtrusive, this hanger is designed to focus attention on the piece being displayed. Made by Hanwei.

€13.90*
Ensure 14 bonus points

this item is in stock

Scimitar
The deeply curved slashing blade of the Scimitar recalls battles between the Saracen and Crusader. The hardwood grips and hawksbill pommel are typical of the originals. This sword comes with a sharp blade. BLADE LENGTH: 30 1/2" OVERALL LENGTH: 37" WEIGHT: 3lbs 4oz THICKNESS: .23"

€259.00*
Ensure 259 bonus points

this item is in stock

Practical Iaito, Blade length 29"
Iaito Frequent Drawing Practice : Our Practical Katanas have always been at the forefront of providing economical yet functional swords to the martial arts community. Now with the blade geometries and profiles of the performance series and the affordability of our Practical fittings, competition-standard swords are within the reach of the tightest budget. This is an unedged training blade for the practice of Iaido. Forged from stainless steel the tempered blades are not only maintenance-free but more importantly provide the correct weight and balance needed for the rigors of repetitve drawing and sword motion practice. Each blade has a deeply cut groove (bo-hi) to provide audible feedback when swung properly. Frequent Drawing Practice These unedged training blades provide for safe drawing for the beginning practitioner of the 450 year old art of Iaido. Forged from stainless steel the tempered blades are not only maintenance-free but more importantly provide the correct weight and balance needed for the rigors of repetitive drawing and sword motion practice. Each blade has a deeply cut groove (bo-hi) to provide audible feedback when swung properly. Key Features 27" Steel dull training blade Built for Martial Artists MEASUREMENTS: Handle length: 10 1/2" Point of Balance: 5 1/2" Width at Guard: 1.27" Width at Tip: .99" Thickness at Guard: .25" Thickness at Tip: .15" Sori: 3/4" Blade length: 73.66 cm Total length: 102.87 cm Weight: 906 gr. The length of an iaito is normally measured in japanese shaku (1 shaku = 11,9 inch). The next table shows how long your iaito has to be according to your height. Körpergröße Body Height Shaku Länge in cm Length in Inch 155 - 160 cm 5 ft 1 in - 5 ft 3 in 2,30 shaku 67.7 cm 26,7 inch 160 - 165 cm 5 ft 3 in - 5 ft 5 in 2,35 shaku 71,2 cm 28 inch 165 - 170 cm 5 ft 5 in - 5 ft 7 in 2,40 shaku 72,7 cm 28,6 inch 170 - 175 cm 5 ft 7 in - 5 ft 9 in 2,45 shaku 74,2 cm 29,2 inch 175 - 180 cm 5 ft 9 in - 5 ft 11 in 2,50 shaku 75,8 cm 29,8 inch 180 - 185 cm 5 ft 11 in - 6 ft 1 in 2,55 shaku 77,3 cm 30,4 inch 185 - 190 cm 6 ft 1 in - 6 ft 3 in 2,60 shaku 78,8 cm 31 inch

€439.00*
Ensure 439 bonus points

this item is in stock

Zatoichi Shirasaya Katana, Red
The blind Samurai continues his adventures with four exciting versions of the stick sword of Zatoichi by Paul Chen of Hanwei which capture the excitement of the movies. With the same fully tempered carbon steel blade of the popular black Zatoichi (#11913) this stick sword features a thrilling red lacquered scabbard that will be the envy of everyone. With an etched hamon line on the carbon steel blade and a red lacquered wooden handle and saya, this functional stick sword has a point of balance of 5-1/2 inches. This sword is the same high quality as that of the Zatoichi movie sword used by the legendary blind Samurai and will and will get lots of attention. With its attractive style and ease of use, it will provide many hours of adventures for you and your friends. Add this one to your collection – you won’t be sorry! Details: Blade length: 56 cm Handle length: 24 cm Total length: 82 cm Weight: 0.53 kg Balance point: 14 cm

€379.00*
Ensure 379 bonus points

this item is in stock

Broadsword Belt (Right Handed)
Hanwei’s new sword belt is styled after 13th century examples and is capable of handling most medieval-style single-hand and hand-and-a-half swords. Unlike most of the originals, which were usually dedicated to a particular sword, this belt has fully adjustable belt loops to accommodate a wide variety of scabbards. The belt is also available as left handed version (Item number 13924). Crafted in heavy top-grain leather and sized to adjust to most waist sizes, these belts will provide many years of hard use. Made by Hanwei. Details: Weight: 425 g The belt tied around the waist is 148 cm long. The wide belt which holds the sword is 136 cm long. Specs may vary slightly from piece to piece.

€164.90*
Ensure 165 bonus points

this item is in stock

Sidekick Bootknife
Our "Sidekick" Boot Knife is undoubtedly one of the finest available. The 4 ¾" forged 440C spear-point blade is balanced by a full tang with wrap-around stag scales. An engraved guard and rivet heads complete the picture. The polished steel sheath features the new ViseClipTM mounting, for positive attachment to boot or belt, while a nylon sheath insert provides secure blade retention for handle-down carry. A padded storage case is included. Specifications: Blade length: 4 3/4" Handle length: 4" Overall length: 8 3/4" Weight: 5.5oz Thickness: .160"

€289.00*
Ensure 289 bonus points

this item is in stock

Viking Axe
The Throwing Axe could be used as a weapon in two ways in the days of the Vikings. As a hand-held weapon it was a lethal force, capable of cleaving helms, mail and shields, while a volley of thrown axes could disrupt an opposing force and allow a breakthrough in a shield wall. Our throwing axe has also proved itself in modern throwing competitions as a well balanced piece. Replacement shafts are available. Measurements OVERALL LENGTH: 17 1/2" WEIGHT: 1lbs 4oz THICKNESS: .40"

€75.90*
Ensure 76 bonus points

this item is in stock

Raptor Wakizashi
The Raptor Series has been designed for the cutting practitioner who does not necessarily have access to mats but who wishes to practice and perfect his cutting technique. The blades are forged in 5160 high carbon steel and specially heat treated to produce very high resilience and greater tolerance of misdirected cuts than a conventional differentially tempered blade. The edge geometry is configured to facilitate the cutting of both soft and semi-hard materials without chipping, allowing the cutter a wide choice of targets. Made by Hanwei. Details: Overall length: 68,1 cm Blade length: 48,58 cm Handle length: 16,51 cm Overall weight: approx. 0,76 kg Material: 5160 High carbon steel Specs will vary slightly from piece to piece.

€419.00*
Ensure 419 bonus points

this item is in stock

%
Saxon
CAS Hanwei’s smiths have outdone themselves with their recreation of a 9th Century Saxon sword by replicating a technique used by the Saxons and Vikings and producing a stunning blade that features a pattern-welded core with high-carbon edge sections. This technique was used by the old-time smiths as a means of producing blades (just for the rich folks) that were sharp, resilient and decorative and eleven hundred years on, CAS Hanwei has made them affordable. The sword’s design is based on a 9th Century piece found in the bank of a stream in England in 1976 and now on display in the Yorkshire Museum. Details: Weight: approx. 1362 g Overall Length: approx. 86 cm Blade Length: approx. 70 cm Handle length: approx. 16 cm Blade Material: Damascus/1095

€1,259.30* €1,799.00* (30% saved)
Ensure 1260 bonus points

this item is in stock

Chinese Cutting Sword
Designed by noted martial artist and teacher Scott M. Rodell, CAS` Chinese Cutting Sword provides a purpose-built weapon for the art of cutting in Chinese Swordsmanship. Utilizing a special steel formulation and heat treatment regimen developed by Hanwei, the blade optimizes edge hardness and body toughness, ideal characteristics in a cutting sword. The elegantly simple steel fittings reinforce the swords mission, providing uncluttered lines while still remaining true to tradition. The black leather-over-cranberry rayskin grip ensures secure handling. A rosewood scabbard with fittings matching the hilt completes an attractive package. Scott M. Rodell`s martial arts career includes over 25 years of training in Yang Style Taijiquan. He has trained under several noted Chinese masters, in both the U.S. and China. He is the founding Director of the Great River Taoist Center, headquartered in Washington D.C. with branches across the U.S., Russia, Estonia, Netherlands, Germany and Australia. Rodell is the author of "Chinese Swordsmanship, the Yang Family Taiji Jian Tradition" and "A Practical Guide to Test Cutting for Historical Swordsmanship", both of which are highly recommended. Made by Hanwei. Details: Weight: approx. 965 g Overall Length: approx. 100 cm Blade Length: approx. 74 cm Blade Material: Hanwei Special Steel Handle Material: Cranberry wood wrapped with rayskin Handle Length: approx. 22 cm

€549.00*
Ensure 549 bonus points

this item is in stock

Heros Axe
In many myths and folk tales, a hero is a man or woman (then often called a heroine), traditionally the protagonist of a story, legend or saga, commonly possessed of powers far beyond that of a standard human, which enable him or her to perform some truly extraordinary, beneficial deed (an "heroic deed") for which he or she is famous. These powers are sometimes not only of the body but also of the mind. Heroes are typically opposed by villains. Length 71 cm Blade 20 cm

€279.00*
Ensure 279 bonus points

this item is in stock

Sparring Jian Sword
Traditionally Chinese Martial Artists have used wooden "wasters" during sparring practice to inform their training and perfect their technique. While these wasters are generally safe, they have serious limitations for learning how swords actually behave during sparring. Hanwei's Sparring Jian have been designed by Scott Rodell to handle as closely as possible to sharp jian while providing rounded edges and safe flex during a thrust. Using the same blade steel, advanced heat treatment regimen and handle fittings as the Rodell designed Hanwei Cutting Jian students can practice forms, sparring and cutting all with the same design. Through these three disciplines the student can take a holistic approach to their jianfa training; what works in forms must work in sparring must work in cutting must work in forms, etc... Scott M. Rodell`s martial arts career includes over 30 years of training in Yang Style Taijiquan. He has trained under several noted Chinese masters, in both the U.S. and China. He is the founding Director of the Great River Taoist Center, headquartered in Virginia with branches across the U.S., Russia, Estonia, Netherlands, Germany and Australia. Rodell is the author of several books including: "Chinese Swordsmanship, the Yang Family Taiji Jian Tradition”, “Dandaofa Xuan - Chinese Long Saber Anthology”, “Fundamentals of the Wudang Sword Method - Selected Translations with Commentary from a Manual of Chinese Swordsmanship”, “Shi Jian Pu - Manual of Ten Sword Skills - A Hand Book of Chinese Swordsmanship”, and "A Practical Guide to Test Cutting for Historical Swordsmanship", all of which are highly recommended. Key Features: Designed by Scott Rodell Safe Blunted Edges Rolled Tip Specifications Overall: 39 1/2" Blade Length: 29" Handle Length: 7" Weight: 2lb 2oz Point of Balance: 3 1/2" Blade Steel: 5160

€429.00*
Ensure 429 bonus points

this item is in stock

Tsunami Tanto
Each piece in the Tsunami Series has a hand-forged T10 high-carbon steel blade (nagasa) and is differentially tempered using a traditional claying method. The tsuba, fuchi, & kashira are made of black iron and marked with the Tomoe crest (mon). The temper lines (hamon) are evident and prominent. Each piece has a deeply lacquered black saya with a one-piece brass habaki construction. Real ray skin (same) is used on the tsuka, and the tsuka-ito and sageo are made of premium woven Japanese black cotton. The katana and wakizashi are constructed with a large o-kissaki and are ideal for cutting exercises (tameshigiri). The handle on the tanto is an attractive ribbed buffalo horn. A great set for those interested in the art of Kenjutsu. KEY FEATURES: * High-carbon steel blade * Deeply lacquered black saya * Ribbed buffalo horn MEASUREMENTS: BLADE LENGTH: 17.15 cm HANDLE LENGTH: 10.16 cm OVERALL LENGTH: 29.85 cm WEIGHT: 283.5 g THICKNESS: 0.71 cm

€629.00*
Ensure 629 bonus points

this item is in stock

Thunder God Tsuba Pendant
These tsuba pendant necklaces from CAS Hanwei are crafted in sterling silver and represent iconic tsuba designs from our line of Japanese Katana. The one non-tsuba style may be recognized as the dragon from the CAS Hanwei logo! The braided neck bands feature a unique sliding closure that allows for a full range of length adjustment. Each piece is packaged in an upscale clam shell jewelry box creating an exceptional gift for the martial artist or sword collector. Key Features: o Sterling Silver o Braided Necklace o Great Gift! Specifications: Diameter: 4 cm

€39.00*
Ensure 39 bonus points

this item is in stock

Sword bag for one sword
The Adam Hsu Sword Bag is very strongly made in a heavy Cordura fabric with leather reinforcing. It will accommodate any of the single-hand Hsu Series Jians. * Will hold any one-handed Adam Hsu Jian * 7 1/2 x 5 Accessory Pocket MEASUREMENTS: Product width: 5 1/2" Overall length: 45"

€44.90*
Ensure 45 bonus points

this item is in stock

Tactical Wakizashi
The "Sidearm of the Samurai" gets a serious update in our Tactical Wak, designed for strenuous outdoor use and protection. Based on the blade geometry and superb cutting ability of the Paul Chen Raptor series wakizashi but with full tang construction for ultimate strength, the Tactical Wak is equal to any required task and then some. The 5160 high-carbon spring steel blade is sharp as ever and the checkered Kraton handle provides a sure foul-weather grip. The fiberglass scabbard construction avoids water absorption and reduces carrying weight, while several lanyard holes and the included ParaCord provide carrying and backpack attachment options. Specifications: Overall: 78,74 cm Blade Length: 50,8 cm Handle Length: 21,59 cm Weight: 0,85 kg Blade Steel: 5160 Specs will vary slightly from piece to piece.

€419.00*
Ensure 419 bonus points

this item is in stock

Early Medieval Single Hand Tinker Pearce Sharp
The Early Medieval Sword is typical of the 13th-14th century single hand swords but the Type XII blade was known to be in use from as early as the late Viking era. This version features a sharp Marquenched spring steel blade. As with all Medieval Tinker models, this sword is dismountable. CAS has commissioned Michael `Tinker` Pearce to design a line of swords that will satisfy both the sparring and cutting needs of Western Martial Arts practitioners. Matching sharp and blunt versions of each sword in the series offer the same outstanding handling characteristics in both disciplines. The swords meet Tinker`s exacting quality requirements and are built in much the same way as his custom pieces. Each blade is forged from 5160 spring steel, Marquenched to the desired hardness of 50-53 HRC while the tang is drawn back to the low 30s HRC. For the Medieval models the very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dismantling of the hilt assembly for inspection, to exchange blades if needed, and for anyone wanting to easily customize their grip. Also the sharp and blunt blades are interchangeable on all Medieval models. The grips are cord wrapped and leather covered wood and tapered for a comfortable grip. Each sword is supplied with a leather covered wood scabbard with metal throat and chape.

€429.00*
Ensure 429 bonus points

this item is in stock

Pipe Hawk
Replicating a museum piece from the days of trade between the French fur trappers and the American Indians, our Pipe Hawk is fully functional both as a hatchet and a pipe, with a steel blade, bowl and mouthpiece. As in the original, a reaming pin (for clearing the smoke passage) is concelaed in the head of the end of the shaft. Measurements OVERALL LENGTH: 18 1/4" WEIGHT: 12oz THICKNESS: .28"

€159.90*
Ensure 160 bonus points

this item is in stock

Short Viking Axe
The Short Viking Axe was useful both on the farm and in battle. It is excelled as a close quarters weapon, while still being light enough to throw when necessary. Key Features Historically Accurate Fully Functional Hardwood Shaft Measurements BLADE LENGTH: 5 1/4" HANDLE LENGTH: 25" OVERALL LENGTH: 25 1/4" WEIGHT: 2lb 2oz THICKNESS: .33"

€119.90*
Ensure 120 bonus points

this item is in stock

back on stock
Practical Tai Chi Sword, 76.2 cm
T'ai Chi Ch'üan, Taijiquan, Tai Chi Chuan, or commonly Tai Chi or Taiji, is a Nei chia ("internal") Chinese martial art which is known for the claims of health and longevity benefits made by its practitioners and in some recent medical studies. T'ai Chi Ch'uan is also known as a "soft style" martial art. T'ai Chi forms are best known as the slow motion routines groups of people practice every morning in hundreds of parks across China and, increasingly, other parts of the world. In T'ai Chi classes one is taught awareness of one's own balance and what affects it, awareness of the same in of others, and appreciation of the practical value in one's ability to moderate extremes of behavior and attitude at both mental and physical levels. This blade was made from high carbon steel ! Details: Blade length: 76.2 cm Handle length: 16.51 cm Overall length: 92.71 cm Weight:623 g Point of Balance: 10.16 cm Width at Guard: 2.77 cm Width at Tip: 1.9 cm Thickness at Guard: 0.53 cm Thickness at Tip: 0.28 cm

€239.90*
Ensure 240 bonus points

this item is in stock

Practical Katana Plus
The Practical Plus Katana from CAS Hanwei provides a very economical cutting sword as dependable as the Practical Katana, but using more traditional fittings and construction methods. The blade is forged and differentially hardened in the traditional claying method with a prominent hamon. The Practical Plus katana features genuine same (rayskin) on the tsuka, with a tsuka-ito (wrap) specially developed for its gripping qualities. The long tang is double-pegged for security. The fittings of the Practical Plus Katana are decorated in a Japanese Dogwood motif with dragon menuki and the handsome tsuba is of an iron “sunburst” design with a brass habaki. Please note: the katana, wakizashi or tanto’s sageo (cord) on the saya (scabbard) may not be wrapped as pictured. Sageo color may vary. Specifications Overall: 40 1/4" Blade Length: 27 1/4" Handle Length: 11 1/4" Weight: 2lb 8oz Point of Balance: 5 1/2" Width at Guard: 1 1/4" Width at Tip: 7/8" Thickness at Guard: 1/4" Thickness at Tip: 1/8" Sori: 3/4" Blade Steel: 1566 Hrc Edge: 60 Hrc Back: 40 Specs will vary slightly from piece to piece.

€599.00*
Ensure 599 bonus points

this item is in stock

Dao Sword
The Kungfu Sword or Dao is undoubtedly one of the best weapon-grade sword of its type commercially available. Unlike the many decorative and theatrical versions of this sword, the Hanwei product is a true replica of the original. A brass-mounted scabbard is included. The distal-tapered blade and traditional hand-tied grip make for superb handling. KEY FEATURES: * Distal tapered high-carbon steel blade * Great balance * Classic styling MEASUREMENTS: BLADE LENGTH: 25" HANDLE LENGTH: 5 3/4" OVERALL LENGTH: 31 1/4" WEIGHT: 1lb 11oz THICKNESS: .190

€359.00*
Ensure 359 bonus points

this item is in stock

%
Bamboo Katana
In 1876, the Samurai were banned from carrying their swords. This attempt to end a thousand year tradition was not received well by the proud warrior class and the "stick katana" was born. Innocuous walking canes now concealed the revered blades, but the katana lived on. The Bamboo Stick Katana combines an artfully curved bamboo scabbard and handle with a blade (nagasa) that is constructed of hand-forged 1065 high-carbon steel and is differentially tempered using a traditional claying method. The edge hardness and resilient blade body produced by this technique embody the true secret of the Samurai sword. Key features: Hand forged and tempered blade Hand carved Genuine temper line Details: Total length: 39 1/4" Blade length: 27 1/4" Blade width at guard: 1.12" Blade width at tip: .75" Blade thickness at guard: .26" Blade thickness at tip: .17" Sori: 3/4" Point of Balance: 5 1/2" Handle length: 11 1/2" Weight: 1 lb. 13 oz.

€729.52* €829.00* (12% saved)
Ensure 730 bonus points

this item is in stock

Tinker Bastard Sword Sharp with fuller
Like the longswords, these Bastard swords are based on the Oakeshott Type XVIIIA and are designed so that both the sharp and blunt versions will perform identically in the hand, offering the possiblity of sparring and cutting with swords that feel and respond in exactly the same way. The sharp blade is produced in two slightly different versions, one diamond-sectioned throughout its length and the other almost identical but fullered for about one third of its length. The blunt has a longer, broader fuller to compensate for the added edge thickness. The tip of the blunt is sufficiently flexible to provide an adequate level of safety. Wheel-type pommels are sized to provide a grip for the second hand when required. Designed by noted sword smith Michael "Tinker" Pearce and manufacutered by Hanwei, these bastard swords have been are made to satisfy the need of every sword enthusiast, to have a matching set of sharp and blunt swords for cutting and safe training practice. The swords meet Tinker`s exacting quality requirements and are built in much the same way as his custom pieces. Each blade is forged from 5160 Spring Steel, marquenched to the desired hardness of 50-53 Hrc while the tang is drawn back to the low 30s Hrc. The very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dismantling of the hilt assembly for inspection or to exchange blades if needed. Made by Hanwei Measurements: Overall length: 108,59 cm Blade length: 84,77 cm Weight:1,08 kg

€409.00*
Ensure 409 bonus points

this item is in stock

Tinker Early Medieval sword Replacement Blade sharp
This is the Replacement blade for the Tinker Early Medieval sharp sword. This blade is great for Replacement instead of buying a complete new sword. Each replacement blade is forged from 5160 Spring Steel, Marquenched to the desired hardness of 50-53 Hrc while the tang is drawn back to the low 30s Hrc. The very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dimantling of the hilt assembly for inspection or to exchange blades if needed. The replacement blade is designed to work with the Tinker Early Medieval sword only. Made by Hanwei. Measurements: Blade Length: 80,65 cm

€184.90*
Ensure 185 bonus points

this item is in stock

Date Masamune Kabuto & Mempo
Our Japanese kabuto and mempo are superbly constructed, beautifully detailed and a great value. These models replicate the helms of the great Daimyo Takeda Shingen, Oda Nobunaga and Date Masamune respectively. Some of them are based on a museum piece of unknown provenance, doubles as an exquisite stand for a katana and wakizashi set. All four pieces are equipped with leather inserts allowing them to be worn. Custom designed wooden display stands are included. KEY FEATURES: Authentic styling Wearable Great decorator item MEASUREMENTS: BOX HEIGHT: 51.44 cm BOX WIDTH: 44.45 cm

€659.00*
Ensure 659 bonus points

this item is in stock

Practical Bastard Sword
By customer request CAS` have produced a re-enactment version of our the Original Bastard sword. The blade is forged in 5160 high-carbon steel, to minimize burring, and the transverse thickness of the guard has been increased, both to provide adequate strength for re-enactment use and to present a safer profile at the ends of the guard. Another innovation is the provision of an all-leather scabbard, in contrast with the rigid scabbards normally provided with the Practical swords - this is designed both to provide an extra margin of safety when combatants fall on the scabbard in battle and also to minimize the need for replacement scabbards. The sword is supplied with the grip and scabbard in a neutral-coloured leather to allow customization to the owners taste. Special features: - 5160 Steel - Dyeable Leather Handle and scabbard - Built for re-enactors Made by Hanwei. Details: Weight: approx. 1646 g Overall Length: approx. 126 cm Blade Length: approx. 97 cm Blade Material: 5160 Steel Handle Material: Dyeable Leather Handle Handle Length: approx. 28 cm Centre of Gravity: ca 9,5 cm infront of guard Category 2: These swords are likewise suitable for beginners and advanced fighters. All category 2 swords feature high-quality carbon steel blades which hardly show any scratches when used against other blades. The pommels are riveted at the end of the tang.

€499.00*
Ensure 499 bonus points

this item is in stock

Tiger Elite Katana
The Tiger Elite Katana has been re-designed from kissaki to kashira. Utilizing a hand forged and folded Performance Series katana blade and some of the finest fittings available, the Tiger is equally at home as a cutting blade or showpiece. The K120C powder steel blade is differentially tempered using the traditional claying method which produces a HRC60 edge and HRC40 back. This allows for superior edge holding and cutting ability while allowing the blade to absorb the shock of a blow. The hamon (temper line) and hada (folding pattern) are very prominent. The koshirae (fittings) are all made from blackened bronze and detailed in gold. The tsuba (guard) is made from blackened iron with a `stalking tiger´ motif. The same is of the finest ray skin while the tsuka-ito (handle wrap) and sageo (scabbard cord) are made from top-quality japanese cotton. The Tiger is supplied with a protective cloth bag and traditional maintenance kit. KEY FEATURES: * Hand forged and folded steel blade * Traditional Construction * Superior Quality MEASUREMENTS: Blade length: 29 Handle length: 11 Overall length: 41 Weight: 2lb 8oz Point of Balance: 5 1/2" Width at Guard: 1.35" Width at Tip: 1.03" Thickness at Guard: .25" Thickness at Tip: .16" Sori: 3/4"

€1,819.00*
Ensure 1819 bonus points

Item is normally available in about 4-6 weeks.

Dragon Armor - Full Suit
Hanwei's Dragon Armour, named for the helmet crest (mon), is made for the connoisseur of Japanese armours. It faithfully replicates a Byotoji Do Gusoku from the Edo period which, like many fine armours, incorporates an earlier helmet bowl from the Momoyama period. European influence on Samurai armour is discernible in the slight median ridge to the front section of the byotoji okegawa do (breastplate) which, by this period, was designed to deflect musket balls. The plates of the do, with waved edges, are fastened with elaborate shakudo rivets in the form of flowers with gilt centers. This feature illustrates the Japanese preference for a more flexible style of armour than the typical European one-piece breastplate construction. The carrying chest/display seat (hitsu) is black lacquered with the Dragon mon emblazoned in silver on the front panel. Overall, the antiqued patina of the gusoku gives a period appearance and provides a rich addition to any Japanese décor.Our full-sized suits of Samurai armour provide displays of outstanding quality for the den or the dojo. Crafted by the armourers of Hanwei, the armour is authentically detailed and completely realistic. These very affordable pieces are made with traditional styling and materials and are wearable (within a reasonable size range).They are supplied in the customary black lacquered box which, along with an included wooden frame, provides the support for the display.

€6,990.00*
Ensure 6990 bonus points

Item is normally available in about 4-6 weeks.

Practical Basket Hilt
The Practical Basket-Hilt Swords and are built for the re-enactor. The basket is identical to the historic original, but the grips are leather-covered and the blades are unsharpened, with 0.16 cm safety edges and a rounded tip, complying with the combat rules of many re-enactment societies. Scabbards are finished in matte black, ready for owner customization if desired. KEY FEATURES: o Made for the re-enactor o Authentic look and feel o Complies with safety requirements MEASUREMENTS: BLADE LENGTH: 80.65 cm HANDLE LENGTH: 16.51 cm OVERALL LENGTH: 96.84 cm WEIGHT: 1,59 kg Category 2: These swords are likewise suitable for beginners and advanced fighters. All category 2 swords feature high-quality carbon steel blades which hardly show any scratches when used against other blades. The pommels are riveted at the end of the tang.

€439.00*
Ensure 439 bonus points

Item is normally available in about 4-6 weeks.

Tinker 9th Century Viking sharp
While not a direct copy of any particular sword, the Viking sword design was inspired by historical examples from the early 9th Century, most notably finds from the area around Trondheim, Norway, where the circular indentation hilt decoration was popular. The scabbards are provided with suspension points and a period chape, giving the sheathed sword a very attractive appearance. The construction of the Viking "pair" differs from other swords in the Tinker series in as much as they are tang-riveted (peened) in period fashion at the pommel, primarily to satisfy Viking re-enactment requirements. As with the other swords in the series, replacement blades are available. Again, the handling characteristics of the two swords are virtually identical. CAS has commissioned Michael `Tinker` Pearce to design a line of swords that will satisfy both the sparring and cutting needs of Western Martial Arts practitioners. The swords meet Tinker`s exacting quality requirements and are built in much the same way as his custom pieces. Made by Hanwei. Details: Overall length: 95 cm Blade length: 76,5 cm Handle length: 16,5 cm Overall weight: 1,24 kg Point of Balance: 12,07 cm Point of Percussion: 51,5 cm Width at Guard: 5,55 cm Width at Tip: 3,81 cm Specs will vary slightly from piece to piece.

€429.00*
Ensure 429 bonus points

Item is in field warehouse, long distance shipping.

Practical Plus Iaito
The Practical Plus Iaito provides an economical yet authentic sword for the Iaido practitioner. It features genuine Same (Rayskin) on the Tsuka, with a tightly-woven cotton Tsuka-Ito. The long tang is double-pegged for security. The fittings of the Practical Plus Iaito are decorated in a Japanese Dogwood motif with dragon menuki, and the handsome Tsuba is of an iron “sunburst” design with a brass habaki. Specifications Overall: 40 ½” Blade Length: 29" Handle Length: 10 ½” Weight: 1lb 15oz Point of Balance: 5" Width at Guard: 1.20" Width at Tip: .85" Thickness at Guard: .26" Thickness at Tip: .18" Sori: 3/4" Specs will vary slightly from piece to piece.

€698.99*
Ensure 699 bonus points

Item is in field warehouse, long distance shipping.

Tori Tanto
The Tori tanto is an all-new design from CAS/Hanwei that incorporates truly elegant furniture with the functionality of our performance series. This is undoubtedly one of the most elegant mounts ever crafted by CAS/Hanwei. KEY FEATURES: Premium fittings Built for Martial Artists MEASUREMENTS: BLADE LENGTH: 11 1/4" HANDLE LENGTH: 4 1/2" OVERALL LENGTH: 17 1/4" WEIGHT: 13oz

€769.00*
Ensure 769 bonus points

Item is normally available in about 4-6 weeks.

Cutting Dao Schwert
Designed by noted martial artist and teacher Scott M. Rodell, Hanwei's Chinese Cutting Sword provides a purpose-built weapon for the art of cutting in Chinese Swordsmanship. Utilizing a special steel formulation and heat treatment regimen developed by Hanwei, the blade optimizes edge hardness and body toughness, ideal characteristics in a cutting sword. The elegantly simple steel fittings reinforce the sword`s mission, providing uncluttered lines while still remaining true to tradition. The black leather-over-cranberry rayskin grip ensures secure handling. A rosewood scabbard with fittings matching the hilt completes an attractive package.Scott M. Rodell`s martial arts career includes over 30 years of training in Yang Style Taijiquan. He has trained under several noted Chinese masters, in both the U.S. and China. He is the founding Director of the Great River Taoist Center, headquartered in Virginia with branches across the U.S., Russia, Estonia, Netherlands, Germany and Australia. Rodell is the author of several books including: "Chinese Swordsmanship, the Yang Family Taiji Jian Tradition”, “Dandaofa Xuan - Chinese Long Saber Anthology”, “Fundamentals of the Wudang Sword Method - Selected Translations with Commentary from a Manual of Chinese Swordsmanship”, “Shi Jian Pu - Manual of Ten Sword Skills - A Hand Book of Chinese Swordsmanship”, and "A Practical Guide to Test Cutting for Historical Swordsmanship", all of which are highly recommended. Specifications Overall: 35 3/4" Blade Length: 29" Handle Length: 5" Weight: 2 lb 3 oz Blade Steel: 5160 Specs will vary slightly from piece to piece.

€599.01*
Ensure 600 bonus points

Item is in field warehouse, long distance shipping.

Praying Mantis Katana
The Praying Mantis is a symbol of cunning and power in Japanese culture and is consequently a highly respected theme in Samurai swords. Built on our new L6/Bainite blade (detailed below) in the Shobu Zukuri style with Bo-Hi, and featuring superb koshirae, the Praying Mantis is a very desirable and functional piece. The subdued green silk ito and deep brown of the lacquered saya provide handsome contrast to the dark copper and golden accents of the tsuba, fuchi and kashira. The stalking mantis lies in wait for his next prey, mirroring the power and grace in this exceptional katana. Bainite is a structure of high-carbon steel that combines great strength with excellent flexibility and shock absorption characteristics. It has been known as an exemplary Katana blade component for a number of years but its use has been restricted to a few top-class master smiths, due to the difficulties involved in performing the exacting heat treatment procedures necessary for the production of a Bainite blade body in combination with the very hard Martensite Yakiba (edge section) required for Katana blades. Hanwei has now mastered this difficult process, using billets of L-6 tool steel (a very tough high-carbon low-alloy steel) as a starting point. Blades are forged and shaped in the normal way, then carefully heat treated to achieve the required Bainite and Martensite structures before final polishing. KEY FEATURES: * L6/Bainite Shobu Zukuri Blade * Traditional Construction * High Quality Koshirae MEASUREMENTS: Blade length: 29" Handle length: 11" Overall length: 41" Weight: 2lb 8oz

€2,199.00*
Ensure 2199 bonus points

Item is normally available in about 4-6 weeks.

Pudao
The Chinese Pudao, originally an infantry weapon, has been adopted into the martial arts and its use in the hands of a skilled practitioner is spectacular. This weapon is also known as a horse-cutter sword, since it was used to slice the legs out from under a horse during battle. Our Pudao is a weapon to be coveted by infantry of old and modern martial artists alike. The high-carbon tempered steel blade has an agressive distal taper to promote quickness and balance and a long tang for strength, while the oak staff is tightly wrapped in a traditional pattern to optimize handling and adds to the distinctive appearance, as do the dragon-head bronzed steel blade collar and bell tassel. This weapon combines the best attributes of the sword and staff. KEY FEATURES: * Authentic Styling * High-Carbon Tempered Blade * Excellent Balance MEASUREMENTS: HANDLE LENGTH: 41 1/4 OVERALL LENGTH: 69 3/4 WEIGHT: 5lbs 5oz THICKNESS: .28

€369.00*
Ensure 369 bonus points

Item is in field warehouse, long distance shipping.

Sitka
Lockback Folder with a Spear Style Blade from Rock Creek Knife Line made by CAS Hanwei. Forged from a high-alloy steel (HWS-2) proprietary to Hanwei, formulated for toughness, abrasion resistance (edge-holding) and corrosion resistance. The blade is hollow ground for easy edge maintenance and ground from approx. 0.31 cm stock. The frame is built in solid stainless steel with a Rosewood handle treatment and has a bail for belt-clip attachment. An innovative feature on this model is the use of Hanwei’s electroformed engraving. Key Features: - Forged Steel - Corrosion Resistant - Edge Holding/ Ease of Sharpening Details: Weight: approx. 113.5 g Overall Length, closed: approx. 10.5 cm Blade Length: approx. 7.6 cm Blade Material: HWS-2 Handle Material: Rosewood Manufacturer: Hanwei

€125.00*
Ensure 125 bonus points

Item is normally available in about 4-6 weeks.

Large Gear / Single Hand Sword Bag
The Red Dragon Armoury HEMA Kit Bag is the perfect companion for the Sword and Buckler, Backsword, Sidesword and all other single hand sword practitioners. At 46" long it will take all but the longest of single hand swords. The sword compartment is split into 2 sections running along the full length of the bag.As such it is possible to keep your swords and blades, or even masks separately. The generous size of this bag will allow for 2 masks and possibly another depending on the size of your masks. The 2 large pockets are great for storing gloves, sword parts, gorgets or even bottles of water!The bag is constructed from heavy duty material with robust zips and features 2 carry handles and a pair of adjustable straps to allow the bag to be carried as a rucksack. Details: Heavy Duty Construction Enough Room for Several Swords and Masks Can be Carried as a Backpack

€99.00*
Ensure 99 bonus points

Item is normally available in about 4-6 weeks.

Musashi Elite Katana
Miyamoto Musashi, arguably the most famous swordmaster in Japanese history, fought more than 60 duels before retiring and writing his famous treatise on swordplay, the "Book of Five Rings". Development of the two-sword style of swordplay, with the Daito (long sword) and Wakizashi being used together, is credited to Musashi. Mounted in black, the Musashi Elite is faithful to the original down to the famous double-ring iron tsubas. The tsuka-ito is in leather over ray skin. The blade is hand-forged in high-carbon steel, with new geometry to enhance cutting ability. It is edge-tempered using the traditional clay tempering method, resulting in a distinct hamon. Edge hardness is HRC60, back hardness HRC40. The grip is double-pegged to the tang for safety. Supplied with a protective cloth bag. Elite Series: Incorporating a blend of the features of the Katanas in our popular Classic Series and those in our new Performance Series, the swords in our Elite Series embody a careful blend of form and function. As in the Classic Series, the swords have an upgraded standard of blade polish and other refinements in detail while changes in blade design have been introduced to enhance cutting performance. Key Features 1065 High-Carbon Blade Traditional Construction Quality fittings Measurements Blade length: 29" Handle length: 11" Overall length: 41" Weight: 2lb 11oz Point of Balance: 5" Width at Guard: 1.38" Width at Tip: 1.08" Thickness at Guard: .25" Thickness at Tip: .14" Sori: 3/4"

€799.00*
Ensure 799 bonus points

Item is normally available in about 4-6 weeks.

Daisho Kake Kabuto & Mempo
Our Japanese kabuto and mempo are superbly constructed, beautifully detailed and a great value. These helmets replicate the helms of the great Daimyo Takeda Shingen, Oda Nobunaga and Date Masamune respectively. Some are based on a museum piece of unknown provenance, doubles as an exquisite stand for a katana and wakizashi set. All four pieces are equipped with leather inserts allowing them to be worn. Custom designed wooden display stands are included. KEY FEATURES: Authentic styling Wearable Great decorator item MEASUREMENTS: BOX HEIGHT: 51.44 cm BOX WIDTH: 44.45 cm This helmet is in stock !

€659.00*
Ensure 659 bonus points

Item is in field warehouse, long distance shipping.

Tinker Bastard Sword Replacement Blade sharp
This is the replacement blade for the Tinker Bastard Sharp Sword. This blade is great for replacement instead of buying a complete new sword. Each replacement blade is forged from 5160 Spring Steel, marquenched to the desired hardness of 50-53 HRC while the tang is drawn back to the low 30s HRC. The very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dismantling of the hilt assembly for inspection or to exchange blades if needed. The replacement blade is designed to work with the Tinker Bastard sword only. Made by Hanwei. Measurements: Blade Length: 84,77 cm

€184.90*
Ensure 185 bonus points

Item is normally available in about 4-6 weeks.

Mortuary Hilt Schwert
Replicated from an original in the collection of the Royal Armouries in England, our Mortuary Hilt Sword is a classic example of a cavalry or dragoon officer´s sword of the 17th century English Civil War period. Deriving its name from the style of sword which memorialized King Charles I, who was executed in 1649, The Mortuary Hilt Sword´s steel basket is decorated with scrolled foliage while an engraved head of Charles I appears on the pommel. The lozenge-section double-edged blade is partially fullered and bears the swordmaker´s mark "1414", the derivation of which has been lost in time. The leather handle wrap terminates in silver wire "Turks Head" knots. The sword, like the original, is beautifully balanced. This sword comes with a sharp blade. KEY FEATURES: * Authentic replica of museum piece * Fully functional * Scabbard included MEASUREMENTS: BLADE LENGTH: 33" HANDLE LENGTH: 5 1/4" OVERALL LENGTH: 39 1/4" WEIGHT: 2lb 5oz The "antiqued" version of this sword has the item number 3272.

€779.00*
Ensure 779 bonus points

Item is in field warehouse, long distance shipping.

%
Russian Dragoon Officers Shashka Saber with Leather Sheath
This In the late 1800s firearms became the predominant weapon on the battlefield and the need for swords in combat began to decline. Yet the need for a uniform weapon for calvary combat still existed. The Russian response was the shashka which derived from common folk’s horseman’s sabre. The Dragoon Officers Shashka was the pinnacle of that evolution from weapon of the Cossacks to iconic sword that lasted into the 1930s to what we know today.This reproduction of the Russian Dragoon Officers Shashka by Hanwei is faithful in keeping with the proud traditional of Caucasus region and the military. The 33” blade is very thick and yet light weight. The beautifully detailed hilt is etched with a Perovskia flower (Russian sage) and accented with scroll work. The handle is finely carved rosewood. The black leather scabbard mirrors the hilt with matching detailing. An excellent sword for history museum, the sword afficionado or military collector. Details: Total: 100cm Blade length: 84 cm Handle length: 10.8 cm Weight: 0.9kg Balance point: 17.78 cm Thickness at the tip: 3 mm Handle Material: Rosewood

€703.12* €799.00* (12% saved)
Ensure 704 bonus points

Item is in field warehouse, long distance shipping.

Sir William Marshall Sword - Damascus Blade
Our single-hand Marshall Sword sets new standards of quality and authenticity in broadsword construction. The sword is based on an original, now in a British musuem, used by one of England´s finest knights, Sir William Marshall, who served the crown faithfully under Henry II, Richard the Lionheart and Jack Lackland. The single-hand Marshall Sword is available with either a forged high-carbon steel blade or a forged - folded Swedish powder steel blade Both blades are identical in handling characteristics and both are tempered to a tough HRC 52. The blade section features a central ridged fuller and full-length distal taper - a tough test for the bladesmith but resulting in a superb combination of speed and strength. The grip is leather wrapped and laced and the guard and pommel are elegant in their functional simplicity. The scabbard is leather-covered with steel mounts. Truly a sword for the connoisseur. This sword comes with a sharp blade. Key Features: Authentic replica of a museum piece. Excellent balance Fully functional Measurements: BLADE LENGTH: 33 1/4" HANDLE LENGTH: 6 3/4" OVERALL LENGTH: 40" WEIGHT: 3lb 1oz THICKNESS: .235

€769.00*
Ensure 769 bonus points

Item is in field warehouse, long distance shipping.

River Witham Sword
The River Witham Sword was dredged from the River Witham near the town of Lincoln during work carried out in 1788. The sword may be a remnant of the Battle of Lincoln in 1141; however, it was most likely constructed between 1250-1300 CE. This sword comes with a sharp blade. BLADE LENGTH: 31 1/4" OVERALL LENGTH: 38 3/4" WEIGHT: 3lbs 6oz THICKNESS: .28"

€379.00*
Ensure 379 bonus points

Item is in field warehouse, long distance shipping.

Tonbo Katana
The blade of the Tonbo katana is hand-forged and folded from powder steel, with a medium-length (chu) kissaki. The saya is a deep black lacquer featuring gold dragonflies. High quality ray skin (same) is used on the tsuka. The tsuka-ito is made of premium purple Japanese cotton. The tsuba is crafted in black iron, with detailing in gold and bronze and an exquisite dragonfly scene decoration. The silk sageo compliments this piece and is elegantly woven in dark blue and black. The fuchi and kashira are black and with bronze and brass detailing, and the kojiri, koiguchi and kurikata are of polished buffalo horn. The habaki is a one-piece brass construction. Details: Overall length: approx. 107 cm Blade Length: approx. 71 cm Handle Length: approx. 31.8 cm Blade Material: Powder Steel Weight: approx. 1050 g Point of Balance: approx. 11.7 cm Sori: approx. 2.5 cm

€1,759.00*
Ensure 1759 bonus points

Item is normally available in about 4-6 weeks.

Celestial Katana Wootz
The celestial bodies pull at the water’s edge and create the tide, the ebb and flow of waves that bring time and balance to our world. As the samurai warrior must give and take with the ever-flowing tides of life, the Celestial Katana reflects all the harmonious aspects of the heavens and the sea.The kashira and tsuba juxtaposes the hamon with a depiction of turbulent sea with waves crashing against the rocks. The tsuka features black cotton sageo over black same with multi-finish planetary menuki. The saya sparkles with a beautiful silver flake with a gloss polish with a buffalo horn kojiri, kurikata and koiguchi adorned with a navy and white sageo.This special Celestial Katana is made in the crucible Wootz steel and has been differentially hardened. A beautiful wooden display box is included. Specifications Overall: 39 3/8” Blade Length: 27 5/8” Handle Length: 10 ½” Weight: 2.3 lbs Sori: .5" Blade Steel: Wootz Hrc Edge: 58~60 Hrc Back: 38~42

€4,444.00*
Ensure 4444 bonus points

Item is normally available in about 4-6 weeks.

Musashi XL Light Katana
Miyamoto Musashi, arguably the most famous swordmaster in Japanese history, fought more than 60 duels before retiring and writing his famous treatise on swordplay, the "Book of Five Rings". Development of the two-sword style of swordplay, with the Daito (long sword) and Wakizashi being used together, is credited to Musashi. Mounted in black, the Musashi Katana is faithful to the original down to the famous double-ring iron tsubas. The tsuka-ito is in leather over ray skin. The blade is hand-forged in high-carbon steel, with new geometry to enhance cutting ability. The XL Light blades feature the same geometry as those of the XL but incorporate deeply cut grooves (bo-hi) to reduce the weight of the blade while retaining most of it´s strength and cutting ability. This weight reduction makes for a quicker sword, well adapted for multiple cuts in lighter targets. Edge hardness is HRC60, back hardness HRC40. The grip is double-pegged to the tang for safety. Supplied with a protective cloth bag and traditional maintenance kit. KEY FEATURES: * Massive XL Light Blade Geometry * Authentically constructed * Built for Martial Artists MEASUREMENTS: Blade length: 28 ½" Handle length: 11" Overall length: 41" Weight: 2lb 9oz Point of Balance: 5 1/2" Width at Guard: 1.45" Width at Tip: 1.11" Thickness at Guard: .26" Thickness at Tip: .18" Sori: 3/4"

€829.01*
Ensure 830 bonus points

Item is normally available in about 4-6 weeks.

Practical Plus XL Light Katana
The Practical Plus XL Light Katana from Hanwei provides a cutting sword that is economical while featuring traditional fittings and construction methods. Designed for quicker cuts in heavier targets, these katanas feature genuine same (rayskin) on the tsuka with a tightly-woven cotton tsuka-ito. The long tang is double-pegged for security. The fittings of the Practical Plus Katana are decorated in a Japanese Dogwood motif with dragon menuki, and the handsome iron tsuba features a "sunburst" design with a brass habaki. Please note: the katana, wakizashi or tanto’s sageo (cord) on the saya (scabbard) may not be wrapped as pictured. Sageo color may vary. Specifications Overall: 40 1/2” Blade Length: 28 ½” Handle Length: 11” Weight: 2lb 9oz Point of Balance: 5 1/2" Width at Guard: 1 1/2" Width at Tip: 1 1/4" Thickness at Guard: 1/4" Thickness at Tip: 1/8" Sori: 3/4" Blade Steel: 1566 Hrc Edge: 60 Hrc Back: 40 Specs will vary slightly from piece to piece.

€699.00*
Ensure 699 bonus points

Item is normally available in about 4-6 weeks.

Kudu
Hunter with a Nessmuk Style Blade from Rock Creek Knife Line made by CAS Hanwei. Forged from a high-alloy steel (HWS-1) proprietary to Hanwei, with an edge hardness of 58-60HRc and excellent corrosion resistance, edge-holding and ease of sharpening. The blade thickness is approx. 0.48 cm and the blade is flat ground. An aggressive thumb grip is provided on the back of the blade for blade control. The Tang is very substantial, terminating in a short thread at the pommel. The stacked-leather handle employs bark-tanned leather and is secured by a sleeve nut at the pommel. The guard and pommel are investment cast in stainless steel. Sheath is made in bark-tanned leather with stainless steel reinforcing at the wear points and has a strap-and-snap retainer. Key Features: - Forged Steel - Corrosion Resistant - Edge Holding/ Ease of Sharpening Details: Weight: approx. 170 g Overall Length: approx. 22 cm Blade Length: approx. 11 cm Blade Material: HWS-1 Handle Material: Stacked-leather Manufacturer: Hanwei

€78.99*
Ensure 79 bonus points

Item is normally available in about 4-6 weeks.

Tsunami Katana
Each piece in the Tsunami Series is stylized with the renowned Tomoe motif. The tsuba, fuchi, & kashira are made of black iron and marked with the Tomoe crest (mon). The blades are hand-forged from T10 high-carbon steel and are differentially tempered using traditional claying methods. The temper line (hamon) is evident and prominent. Each piece has a deeply lacquered black saya with a one-piece brass habaki construction. Real ray skin (same) is used on the tsuka, and the tsuka-ito and sageo are made of premium woven Japanese black cotton. The katana and wakizashi are constructed with a large o-kissaki. The handle on the tanto is an attractive ribbed buffalo horn. KEY FEATURES: * High-carbon steel * Deeply lacquered black saya * Ideal for cutting exercises MEASUREMENTS: Blade length: 71.12 cm Handle length: 29.21 cm Overall length: 102.87 cm Weight: 1190.7 g Point of Balance: 12.7 cm Width at Guard: 3.23 cm Width at Tip: 2.41 cm Thickness at Guard: 0.76 cm Thickness at Tip: 0.64 cm Sori: 1.91 cm

€1,149.00*
Ensure 1149 bonus points

Item is in field warehouse, long distance shipping.

Dragonfly Katana - 28" blade
Our new Dragonfly Katana possesses all the attributes that make a katana. An original distinctive style, with a thinner and lighter blade that is individually hand forged and folded. Our Dragonfly Katana features the blending of T-10 and 1055 steel. This new folded steel combination presents striking contrast between the layers and when polished reveals a highly visible hada. The Dragonfly held a special significance to the Samurai. Their seemingly tireless movement reflected the Samurai’s desire to give tireless service to his feudal Lord. The fittings are beautifully antiqued duplicating the look of old iron. The tsuba design is made in iron with a copper inlaid dragonfly, which contrasts beautifully against the weathered looking iron. The authenticity and craftsmanship behind these fittings. The dark brown silk ito is set off by the black same making this a unique offering. The lower shinogi and the scant hira-niku make this blade lighter and faster, and gives it less resistance when cutting soft targets. The tsuka has the slight “waisting”, ryugo, that is popular with many who study Japanese sword arts. Three blade lengths are available: 12151 Dragonfly Katana - 76.2 cm blade length 12152 Dragonfly Katana - 73.66 cm blade length 12153 Dragonfly Katana - 71.12 cm blade length Order your preference while supplies last. Specifications Overall: 45 1/2" Blade Length: 28" Handle Length: 12" Weight: 2 lbs 8 oz Thickness at Guard: 6.8mm Thickness at Tip: 2.5mm Sori: 3/4" Blade Steel: T10 & 1055 Hrc Edge: 60 Hrc Back: 40 Specs will vary slightly from piece to piece.

€2,999.00*
Ensure 2999 bonus points

Item is in field warehouse, long distance shipping.

Renaissance Wax 200ml
Renaissance wax polish was originally formulated in the British Museum research laboratories in the early 1950's, in response to a discussion amongst museum technicians at an international conference on fine-art conservation. In accelerated ageing tests, the British Museum scientist found that all current commercial waxes based on the usual natural waxes (beeswax and carnauba wax) contained acids which, in time, could spoil original finishes on national historic collections of furniture. He rejected them all and investigated the new so-called 'fossil' or microcrystalline waxes being refined out of crude oil. With their distinct characteristics depending on their geographical origins, the new 'man-made' waxes could be accurately blended to meet the needs of many industries, from cosmetics and pharmaceuticals to heavy engineering. Thus, the waxes combined Nature's best qualities with the advantages of modern technology. The blend which emerged from that research was 'designed' for long term protection of all classes of museum exhibits. At last museum technicians and others caring for important collections could use wax polish that neither caused future conservation problems nor detracted from the intrinsic values of their treasures. For over forty years, Renaissance Wax has been the No. 1 choice of museums for the preservation of precious items including swords and other edged weapons. Professional conservators throughout the world depend on Renaissance Wax to protect their collections. Properly applied, a little goes a long way. Made by Hanwei. Details: Content: approx. 200 ml Weight: approx. 198.5 g

€47.90*
Ensure 48 bonus points

Item is normally available in about 4-6 weeks.

Ox-Tail Dao
The Ox-Tail Dao is undoubtedly one of the best weapon-grade swords of its type commercially available. Unlike the many decorative and theatrical versions of this sword, the Hanwei sword is a true replica of the originals. With its traditional ox-tail design, distal-tapered blade and hand-tied grip, the dao handles very well. A stainless steel mounted wooden scabbard is included. Specifications Overall: 32" Blade Length: 25" Handle Length: 7" Weight: 1lb 11oz Point of Balance: 5" Width at Guard: 1.45" Width at Tip: 2" Thickness at Guard: .21" Blade Steel: 1566

€548.99*
Ensure 549 bonus points

Item is normally available in about 4-6 weeks.

Practical plus Elite Katana
The Practical Plus Elite Katana provides a cutting sword that is economical while featuring traditional fittings and construction methods. Designed for multiple cuts in normal targets, these Practical Plus Elite Katana features genuine same (Rayskin) on the tsuka, with a tightly-woven cotton tsuka-ito. The long tang is double-pegged for security. The fittings of the Practical Plus Katana are decorated in a Japanese Dogwood motif with dragon menuki, and the handsome iron tsuba features a "sunburst" design with a brass habaki. Please note: the katana, wakizashi or tanto’s sageo (cord) on the saya (scabbard) may not be wrapped as pictured. Sageo color may vary. Specifications Overall: 40" Blade Length: 28" Handle Length: 11" Weight: 2lb 7oz Point of Balance: 5 1/2" Width at Guard: 1.39" Width at Tip: 1.03" Thickness at Guard: .26" Thickness at Tip: .16" Sori: 3/4" Blade Steel: 1566 Hrc Edge: 60 Hrc Back: 40 Specs will vary slightly from piece to piece.

€699.00*
Ensure 699 bonus points

Item is normally available in about 4-6 weeks.

Koi Wakizashi
The Koi Wakizashi from Paul Chen has a hand-forged T10 high-carbon steel blade. The blade on this is differentially hardened using the traditional claying method. The Koi Wakizashi is mounted in black and white and features black same, the tsuka-ito is made of premium white Japanese cotton. The saya is finished in a deep black lacquer with a black and white striped cotton sageo. A finely rendered Koi, with true front-and-back detail, forms the black iron tsuba. The fittings are superbly antiqued adding to the aesthetics of the piece. The Koi Wakizashi from Hanwei is supplied with a protective cloth bag and traditional maintenance kit. It is said that a Koi swims up rivers and climbs waterfalls with bravery not unlike a Samurai warrior. As well, it is said that if a Koi is caught, it will lie still beneath the knife, facing its death bravely like a Samurai facing a sword. Details: Overall length: approx. 70.8 cm Blade Length: approx. 50 cm Handle Length: approx. 16.5 cm Blade Material: T10 High-Carbon Steel Weight: approx. 652.5 g Point of Balance: approx. 10.8 cm Sori: approx. 2.5 cm

€1,029.00*
Ensure 1029 bonus points

Item is in field warehouse, long distance shipping.

Ronin Katana
The Story of the 47 Ronin is one of the most celebrated and influential tales of the Samurai from the Edo period. Lord Asano was a powerful Daimyo ordered by the Shogun to entertain guests of the Imperial Family. The highest ranking master of protocol, Kira, was given the task of teaching Asano, among others, proper matters of etiquette in this task. Lord Asano and Kira quickly grew to dislike each other and the teacher insulted his student at every opportunity. No longer able to contain himself, Asano drew his sword upon Kira, wounding him in the attack. This act led to Asano´s ordered suicide (seppuku) and the confiscation of his property. On December 14, 1702, nearly one year after Asano´s death, 47 of Asano´s men (now Ronin), descended upon the mansion of Kira to exact their revenge. After a fierce battle, the Ronin demanded that Kira commit seppuku for his transgressions against their former master. When he refused he was beheaded. For their actions the Ronin were themselves sentenced to death by seppuku. They are buried together at the Sengakuji, offering a true testament to the loyalty inherent in the Samurai. Our Ronin Koshirae Katana captures the spirit of Lord Asano´s 47 Ronin. The blackened iron Tsuba depicts Asano´s followers on their vengeful march. The blade is hand forged & folded Swedish powder steel with Hi in a traditional Shinogi Zukuri style. KEY FEATURES: * Folded High-Carbon Blade * Authentically constructed * Quality fittings MEASUREMENTS: Blade length: 28 ½" Handle length: 11" Overall length: 40 ½" Weight: 2lb 7oz

€1,759.00*
Ensure 1759 bonus points

Item is normally available in about 4-6 weeks.

Wind and Thunder Katana
This new cutting katana from CAS/Hanwei is designed specifically for the martial artist. The Wind & Thunder features a heavier and thicker blade with traditional furniture and fittings. The Wind & Thunder is fitted with the black iron Raiden tsuba and Tomoe motif fuchi and kashira. The handle is wrapped in genuine same (ray skin) and the tsuka-ito is premium Japanese black cotton. The saya is done in a traditional black laquer and the sageo is also black cotton. This sword is an excellent choice for those interested in batto-jutsu. KEY FEATURES: Thick & Heavy Blade Hand-forged High Carbon Steel Blade Great for Tameshigiri MEASUREMENTS: Blade length: 74.93 cm Handle length: 29.85 cm Overall length: 106.68 cm Weight: 1502.55 g Point of Balance: 17.78 cm Width at Guard: 3.48 cm Width at Tip: 3 cm Thickness at Guard: 0.89 cm Thickness at Tip: 0.76 cm Sori: 1.91 cm Blade Steel: T10

€1,149.00*
Ensure 1149 bonus points

Item is normally available in about 4-6 weeks.

Wheel Tsuba Pendant
These tsuba pendant necklaces from CAS Hanwei are crafted in sterling silver and represent iconic tsuba designs from our line of Japanese Katana. The one non-tsuba style may be recognized as the dragon from the CAS Hanwei logo! The braided neck bands feature a unique sliding closure that allows for a full range of length adjustment. Each piece is packaged in an upscale clam shell jewelry box creating an exceptional gift for the martial artist or sword collector. Key Features: o Sterling Silver o Braided Necklace o Great Gift! Specifications: Diameter: 4 cm

€35.00*
Ensure 35 bonus points

Item is in field warehouse, long distance shipping.

Sword Case - Medium (for 2 swords)
Our new Hanwei Sword Cases are designed for the martial artist who carries katana and/or bokken to and from the dojo, but they are equally at home with any sheathed swords less than 127 cm long. They are available in medium (16409 - 2 sword) and large (16408 - 3 sword) sizes. The cases are in a black, heavy-duty fabric with leather reinforcing. A shoulder strap and carrying handle provide traveling convenience. Each case has two zippered inside compartments for swords and an outer compartment for maintenance supplies. These cases are perfect for those who travel frequently with their swords across country or across town. Featuring the new 2025 CAS Hanwei logo on the velcro covered pouch, you can accessorize your sword case with velcro patches from your favorite CAS brands. Visit our promotional page for patches and other items. Key Features: Heavy fabric Maintenance pocket with velcro Shoulder strap Specifications: Overall: 132 cm

€119.00*
Ensure 119 bonus points

Im Außenlager, Langstreckenversand - in 12-14 Tagen bei Dir zu Hause

Scramasax with stag horn handle and leather sheath
The Scramasax carried by the Saxons and the Vikings between the 4th and 10th centuries, came in a wide range of sizes and was used both as a tool and a weapon. Carried horizontally, at the back of the belt, the scramasax provided the spearman with both a close-quarters weapon and a tool and utensil in camp. Our Scramasax, with its foot-long blade, would provide both slashing and thrusting power in battle while handling heavy-duty chores around the home and camp. It is patterned on a surviving blade just 3 ½” long, and while these would have been used primarily as eating utensils they could, if needed, be called upon to inflict a disabling wound. This small scramasax is authentically hilted in stag and is equipped with leather horizontal-carry sheaths. Details: Overall: 16.8 cm Blade length: 7.3 cm Handle length: 8.57 cm Weight: 45g Handle Material: Stag

€129.00*
Ensure 129 bonus points

Item is in field warehouse, long distance shipping.

Broadsword Belt (Left Handed)
Hanwei’s new sword belt is styled after 13th century examples and is capable of handling most medieval-style single-hand and hand-and-a-half swords. Unlike most of the originals, which were usually dedicated to a particular sword, this belt has fully adjustable belt loops to accommodate a wide variety of scabbards. The belt is also available as right handed version (Item number 13925). Crafted in heavy top-grain leather and sized to adjust to most waist sizes, these belts will provide many years of hard use. Made by Hanwei. Details: Weight: 425 g Specs may vary slightly from piece to piece.

€104.90*
Ensure 105 bonus points

Item is in field warehouse, long distance shipping.

Tinker Great Sword of War
New to our Tinker Pearce series of Medieval swords is the Great Sword of War. The Great Sword of War is designed and crafted purely as a cutting sword and weighing in at a little less than four pounds, it is built to excel on heavy targets. The 28 cm grip provides excellent leverage and static and dynamic balance are to Tinker’s demanding standards. The blade is again forged in 5160 and hardened to HRC 50-52. The hilt is retained by Tinker’s signature recessed sleeve mounting system, providing secure retention and easy hilt tightening, using the Allen wrench provided. Made by Hanwei. Details: Overall length: approx. 121 cm Blade Length: approx. 91 cm Handle length: 28 cm Blade Material: 5160 High carbon steel HRC: 50-52 Weight: approx. 1747 g Handle Material: wood-cored and leather-covered over a cord wrap Dismountable!

€439.00*
Ensure 439 bonus points

Item is normally available in about 4-6 weeks.

Bushbuk
Skinner with a Trailing Point Style Blade from Rock Creek Knife Line made by CAS Hanwei. Forged from a high-alloy steel (HWS-1) proprietary to Hanwei, with an edge hardness of 58-60HRc and excellent corrosion resistance, edge-holding and ease of sharpening. The blade thickness is approx. 0.48 cm and the blade is flat ground. An aggressive thumb grip is provided on the back of the blade for blade control. The Tang is very substantial, terminating in a short thread at the pommel. The stacked-leather handle employs bark-tanned leather and is secured by a sleeve nut at the pommel. The guard and pommel are investment cast in stainless steel. Sheath is made in bark-tanned leather with stainless steel reinforcing at the wear points and has a strap-and-snap retainer. Key Features: - Forged Steel - Corrosion Resistant - Edge Holding/ Ease of Sharpening Details: Weight: approx. 142 g Overall Length: approx. 21 cm Blade Length: approx. 10 cm Blade Material: HWS-1 Handle Material: Stacked-leather Manufacturer: Hanwei

€89.00*
Ensure 89 bonus points

Item is in field warehouse, long distance shipping.

Springbok
Utility with a Drop Point Style Blade from Rock Creek Knife Line made by CAS Hanwei. Forged from a high-alloy steel (HWS-1) proprietary to Hanwei, with an edge hardness of 58-60HRc and excellent corrosion resistance, edge-holding and ease of sharpening. The blade thickness is approx. 0.48 cm and the blade is flat ground. An aggressive thumb grip is provided on the back of the blade for blade control. The Tang is very substantial, terminating in a short thread at the pommel. The stacked-leather handle employs bark-tanned leather and is secured by a sleeve nut at the pommel. The guard and pommel are investment cast in stainless steel. Sheath is made in bark-tanned leather with stainless steel reinforcing at the wear points and is pouch-type. Key Features: - Forged Steel - Corrosion Resistant - Edge Holding/ Ease of Sharpening Details: Weight: approx. 142 g Overall Length: approx. 20 cm Blade Length: approx. 9 cm Blade Material: HWS-1 Handle Material: Stacked-leather Manufacturer: Hanwei

€85.01*
Ensure 86 bonus points

Item is normally available in about 4-6 weeks.

Hand and a Half
Replicated from a sword thought to be that of Albrecht II of Austria, the Hand-and-a-Half Sword represents the pinnacle of beauty and balance in medieval swords. Classically simple in design with a flattened diamond-section blade and cruciform hilt, the original dates from the early part of the 15th century. The "Lion Rampant" emblem of the Habsburg dynasty is engraved in the pommel, while the Passau "Running Wolf" guild mark and a marigold maker´s mark appear on the blade fuller. Both the grip and the scabbard are leather covered over a cord wrap. KEY FEATURES: * Authentic replica of Museum Piece * Fully functional * Excellent handling and balance MEASUREMENTS: BLADE LENGTH: 34 3/4" HANDLE LENGTH: 10" OVERALL LENGTH: 44 1/2" WEIGHT: 3lb 4oz THICKNESS: .250

€458.99*
Ensure 459 bonus points

Item is normally available in about 4-6 weeks.

Sword Display
Many of the original display stands for Samurai swords had a natural wood finish and in response to many requests we now have available a Daisho display stand with such a finish. Crafted in solid oak, the stand matches the quality of the Hanwei Samurai swords for which it is designed. Key features: Natural wood finish Solid oak For Katana and Wakizashi Details: Total height: 34.29 cm Total length: 52.07 cm Total width: 16.51 cm Weight: 1.7 kg

€199.00*
Ensure 199 bonus points

Item is in field warehouse, long distance shipping.

Tinker Norman Sword sharp
New to the Tinker Pearce series of Medieval swords are the Norman swords in both sharp and re-enactment blunt versions. The Norman swords, with their distinctive cruciform guards and brazil-nut pommels, are similar in weight and static balance and offer virtually identical handling characteristics. Both are harmonically balanced – to optimize cutting ability in the case of the sharp version and to provide authentic handling characteristics for the re-enactor. The blades are forged in 5160 high carbon steel and hardened to HRC 50-52 allowing superior edge retention on the sharp and anti-burr safety on the blunt. Grips are wood-cored and leather-covered over a cord wrap. Made by Hanwei. This is the sharp version, please find the blunt version # 19129. Details: Overall length: approx. 120 cm Blade Length: approx. 78 cm Blade Material: 5160 High carbon steel HRC: 50-52 Weight: approx. 1127 g Handle Material: wood-cored and leather-covered over a cord wrap

€394.90*
Ensure 395 bonus points

Item is normally available in about 4-6 weeks.

Raptor Unokubi Zukuri
The Raptor series, our new line of cutting katanas, has been designed for the cutting practitioner who does not necessarily have access to mats but who wishes to practice and perfect his cutting technique. The blades are forged in 5160 high-carbon steel and specially heat treated to produce very high resilience and greater tolerance of misdirected cuts than a conventional differentially tempered blade. The edge geometry is configured to facilitate the cutting of both soft and semi-hard materials without chipping, allowing the cutter a wide choice of targets. The Raptor Unokubi-Zukuri (Cormorant's Neck) blade design is patterned after the shape of the Naginata, the powerful long-handled weapon popular between the 12th and 14th centuries. Notable for the strongly relieved shinogi-ji and diamond-shaped kissaki, the Unokubi-Zukuri provides excellent balance in a strong cutting blade. Details: Overall length: 45" Blade length: 28.5" Handle length: 13" Weight: 2lb 12oz 5160 high-carbon steel Details will vary slightly from piece to piece.

€599.00*
Ensure 599 bonus points

Item is in field warehouse, long distance shipping.

Scottish Basket Hilt Backsword
It is likely that the blade of the original sword was made in Germany a century earlier and re-hilted as basket designs were refined. The Basket-Hilt Backsword dates from about 1760 and has an unusual basket with twin engraved "horned beastie" plaques and a blade with twin fullers running most of its length. Again the original blade is German in origin but the blade and hilt are contemporary. The Basket-Hilt Backsword has a wire-wrapped ray skin handle and a cloth-covered leather basket liner. This sword comes with a sharp blade. KEY FEATURES: * Authentic replica of a museum piece * Fully functional * Scabbard included MEASUREMENTS: BLADE LENGTH: aprox. 85 cm HANDLE LENGTH: aprox. 17 cm OVERALL LENGTH: aprox. 102 cm WEIGHT: 1460 g THICKNESS: 0,58 to 0,25 cm The antiqued version of this sword has the item number 13271.

€745.00*
Ensure 745 bonus points

Item is normally available in about 4-6 weeks.

Dress Rapier Blade sharp
This sharp Dress Rapier Replacement Blade has a blade length of 93,03 cm inches and has a weight of about 225 g. It is used by many Fencing Organizations. The live Rapier Blade will work for many Hanwei rapiers. Measurements: Overall Length: 111,76 cm Blade Length: 93,03 cm Weight: 225 g

€119.00*
Ensure 119 bonus points

Item is in field warehouse, long distance shipping.

Tinker Early Medieval Sword Replacement Blade blunt
This is the Replacement blade for the Tinker Medieval blunt sword. This blade is great for Replacement instead of buying a complete new sword. Each replacement blade is forged from 5160 Spring Steel, Marquenched to the desired hardness of 50-53 Hrc while the tang is drawn back to the low 30s Hrc. The very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dimantling of the hilt assembly for inspection or to exchange blades if needed. The replacement blade is designed to work with the Tinker Early Medieval sword only. Made by Hanwei. Measurements: Blade Length: 79,69 cm

€169.90*
Ensure 170 bonus points

Item is in field warehouse, long distance shipping.

Tinker Longsword Replacement Blade sharp
This is the replacement blade for Tinker Longsword blade sharp. This blade is great for Replacement instead of buying a complete new sword. Each replacement blade is forged from 5160 Spring Steel, marquenched to the desired hardness of 50-53 HRC while the tang is drawn back to the low 30s HRC. The very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dismantling of the hilt assembly for inspection or to exchange blades if needed. The replacement blade is designed to work with the Tinker Longswords only. Measurement: Blade Length: 88,9 cm

€184.90*
Ensure 185 bonus points

Item is normally available in about 4-6 weeks.

Denali
Lockback Folder with a Drop Point Style Blade from Rock Creek Knife Line made by CAS Hanwei. Forged from a high-alloy steel (HWS-1) proprietary to Hanwei, formulated for toughness, abrasion resistance (edge-holding) and corrosion resistance. The blade is hollow ground for easy edge maintenance and ground from approx. 0.31 cm stock. The frame is built in solid stainless steel with a Rosewood handle treatment. Features a removable pocket clip of Hanwei’s own design. Key Features: - Forged Steel - Corrosion Resistant - Edge Holding/ Ease of Sharpening Details: Weight: approx. 113.5 g Overall Length, closed: approx. 10 cm Blade Length: approx. 7.6 cm Blade Material: HWS-1 Handle Material: Rosewood Manufacturer: Hanwei

€55.00*
Ensure 55 bonus points

Item is in field warehouse, long distance shipping.

Practical XL Light Katana
Our Practical Katanas have always been at the forefront of providing economical yet functional swords to the martial arts community. Designed for quicker cuts in heavier targets, these Practical XL Lights katanas combine the blade geometries and profiles of the Performance Series with the affordability of our Practical fittings. The blades in the cutting styles are forged from 1566 steel and differentially hardened in the traditional manner, producing an edge hardness of HRC60 and spine hardness of HRC40. The tsuka is tightly wrapped with imitation leather in the tradtional style to provide a positive grip that will withstand years of tameshigiri practice. Please note: the katana, wakizashi or tanto’s sageo (cord) on the saya (scabbard) may not be wrapped as pictured. Sageo color may vary. Specifications Overall: 40 1/2” Blade Length: 28 ½” Handle Length: 11" Weight: 2lb 9oz Point of Balance: 5 1/2" Width at Guard: 1.45" Width at Tip: 1.06" Thickness at Guard: .27" Thickness at Tip: .18" Sori: 3/4" Blade Steel: 1566 Hrc Edge: 60 Hrc Back: 40 Specs will vary slightly from piece to piece.

€499.00*
Ensure 499 bonus points

Item is normally available in about 4-6 weeks.

Miaodao Large Version Wood Scabbard
The Miao Dao, the "grain leaf" sabre, receives its name from the early 20th century despite its ancient origin. Its history is a subject of debate among some scholars and sword enthusiasts but all agree about its reemergence in the mid-16th century by General Qi Jiguang who resurrected the sword to combat pirates raiding coastal cities. After the victory over the pirates the Miao Dao remained useful battling enemies of the Ming Empire which led to this famous general's men to be known as the "invincible Qi army". Highly coveted by the soldiers the swords didn't pass along this weapon easily.This beautiful Hanwei Maio Dao is the pinnacle of Chinese sword craftsmanship. The 33" steel blade features a groove on on both sides of the blade to lighten the balance. The ribbed handle is a beautilful dark burgandy which is echoed by the deep burgandy lacquered scabbard. The gorgiously ornate guard and pommel are stainless steel as well as all the other accutrements. An elegant weapon from a more honorable and duty bound age. Specifications Overall: 48 1/2" Blade Length: 33" Handle Length: 12" Weight: 2 lbs 14 oz Blade Steel: 5160

€1,189.00*
Ensure 1189 bonus points

Item is normally available in about 4-6 weeks.

Bearded Axe, Antiqued
Our Viking Axe and Bearded Axe are typical patterns, capable of cleaving helms or armour with impunity. They feature forged heads with sharp tempered edges and hardwood shafts. Details: Overall: 30 1/2" Blade Length: 6" Weight: 1200 g Thickness at Guard: .57“ Sharp Tempered Edge

€149.00*
Ensure 149 bonus points

Item is in field warehouse, long distance shipping.

Crecy-Einhandschwert
The Crecy single-hand sword, celebrating it’s first major battle in 1346, during the hundred years war between England and France, is styled after an early 14th century original. The riveted-tang blade, forged in 5160 high-carbon steel, features a prominent central ridge that provides the necessary stiffness for forceful thrusts, while the stylish hilt features slightly down-turned quillons and a cord-wrapped grip. The handsome scabbard, finished in chestnut leather, is a fitting complement to the sword. Made by Hanwei. Details: Length: 97.8 cm Blade length: 80.6 cm Weight: 1.13 kg Blade steel: 5160 Carbon steel Specs will vary slightly from piece to piece.

€659.00*
Ensure 659 bonus points

Item is in field warehouse, long distance shipping.

Trench Knife
This knife is a replica of a WWII German Army trench knife. Made for militaria collectors and WWII re-enactors, the knife features a Walnut grip, high-carbon spearpoint blade and a black-enamelled steel sheath with a blade retention spring and a belt clip. Authentically detailed and fully functional. KEY FEATURES: * Authentically detailed * Fully functional * Made for collectors MEASUREMENTS: Blade length: 6 1/2" Handle length: 4 3/4" Overall length: 11 1/4" Weight: 5oz Thickness: .15" Comes with either long or short guard.

€69.00*
Ensure 69 bonus points

Item is in field warehouse, long distance shipping.

Lion Katana
The Lion Dog Katana features an O-Kissaki blade of Hanwei's own high-alloy HWS-1S steel, which combines superior performance with an outstanding O-choji hamon. This steel is made in Hanwei's new factory, with high-tech equipment, producing a very pure advanced-metallurgy blade with the best edge-holding capability and resilience of any blade ever produced by Hanwei. The outstanding performance characteristics of blades forged from HWS-1S steel derive from a combination of the careful selection of alloying elements and a complex processing procedure, basically involving the manipulation of the steel’s carbon content across the blade section. This results in a very tough and resilient blade with a hard, highly abrasion-resistant edge. The sharply detailed fittings feature a Lion-dog themed black iron tsuba, with matching fuchi/kashira and golden peony menuki. The complex saya features a gloss-lacquered ribbed section at the koiguchi/kurikata with the balance spatter-lacquered for a very attractive appearance. The premium multi-colored sageo is hand-woven in pure silk. Details: Weight: approx. 1305 g Overall Length: approx. 110 cm Blade Length: approx. 74 cm Blade Material: HWS-1S Steel Handle Length: approx. 33 cm

€1,599.00*
Ensure 1599 bonus points

Item is in field warehouse, long distance shipping.

Solingen Main Gauche antiqued
Based on models of 17th century swept-hilt rapiers of Germanic ancestry, our Solingen Rapier with matching main gauche is an excellent rendition of the timely originals. The blades are constructed of forged high-carbon steel and are equipped with leather scabbards. The guard has a beautiful design with S-curved quillons to protect the hand and for wrapping the fingers around to increase one´s grip strength. This rapier and the matching main gauche blade produced from CAS/Hanwei are now interchangeable with the "Practical" blades, which are designed for safety in rapier sparring. Also available are antiqued are versions of the Solingen Rapier with matching main gauche. This dagger comes with a sharp blade. * Forged high-carbon steel * Leather scabbards This "antiqued" version of the Solingen Main Gauche features a hilt finish, developed by Hanwei, that allows a museum-quality patina to be applied to stainless steel while the non-corroding properties of the steel are retained. This finish is very attractive and gives an authentic appearance to the sword . The "normal" version of this dagger has the item # 13174. For this dagger you can buy a replacement blade item #13680. Overall: 17" 1/2"Blade Length: 11 1/8"Handle Length: 5 3/4"Weight: 16 ozWidth at Guard: 21mmWidth at Tip: 2mm Thickness at Guard: 5mmThickness at Tip: 2mmBlade Steel: 1566  Specs will vary slightly from piece to piece.

€269.00*
Ensure 269 bonus points

Item is normally available in about 4-6 weeks.

Taza Rapier
Long extolled as the pinnacle of rapier design, the “Spanish” or “Cup-Hilt” rapier undoubtedly combined style and function very effectively in 17th century Europe. The very best of these weapons featured beautifully pierced cups and pommels and Paul Chen of Hanwei has replicated these to perfection and combined them with an elegantly tapered high-carbon steel blade in our “Taza” rapier (the name comes from the French, who called this style “a la Taza”). A leather-covered scabbard is included. Specifications Overall: 46 1/4“ Blade Length: 38 1/4“ Weight: 2lb 1oz Point of Balance: 5" Point of Harmonics: 20" Width at Guard: .75" Width at Tip: .40" Thickness at Guard: .25" Thickness at Tip: .10" Specs will vary slightly from piece to piece.

€699.00*
Ensure 699 bonus points

Dieser Artikel hat eine Lieferfrist von ca. 4-6 Wochen.

Beile Dao
The original Beile (Lord in Manchu), also known as the “Banner Lords” and “Iron-Capped Princes” were the sons of Nurgaci, founder of the Qing Dynasty. After his death the Beile Hong Taiji was selected as Khan. Our Beile Dao commemorates this Prince. Its beautifully detailed Iron furniture complements the patterning of the Damascus blade and the rayskin-covered scabbard adds to the rugged richness of the sword. Truly a collector piece and creating a demand in its homeland, this sword will only be available in limited quantities.

€2,599.00*
Ensure 2599 bonus points

Item is normally available in about 4-6 weeks.

Musashi Iaito, 100,3 cm Gesamtlänge
The Musashi Iaito provides an economical yet authentic sword for the Iaido practitioner. It features genuine Same (Rayskin) on the Tsuka, with a tightly-woven leather Tsuka-Ito. The long tang is double-pegged for security. Named for one of the most renowned swordmasters in Japanese history and featuring the famous "double ring" iron tsuba, the Musashi Iaito is faithful to the original down to the famous double-ring iron tsubas. Specifications Overall: 39 ½” Blade Length: 28” Handle Length: 10 ½” Weight: 1lb 13oz Point of Balance: 5" Width at Guard: 1.19" Width at Tip: .88" Thickness at Guard: .25" Thickness at Tip: .18" Sori: 3/4" Specs will vary slightly from piece to piece.

€829.00*
Ensure 829 bonus points

Item is normally available in about 4-6 weeks.

Tinker Bastard Sword with Groove sharp
This is the replacement blade for the Tinker Bastard Sword sharp groove with fuller. This blade is great for replacement instead of buying a complete new sword. Each replacement blade is forged from 5160 Spring Steel, marquenched to the desired hardness of 50-53 HRC while the tang is drawn back to the low 30s HRC. The very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dismantling of the hilt assembly for inspection or to exchange blades if needed. The replacement blade is designed to work with the Tinker Bastard sword only. Made by Hanwei Measurements: Blade Length: 84,77 cm

€194.90*
Ensure 195 bonus points

Item is in field warehouse, long distance shipping.

Tactical Tanto
Based on the blade geometry and superb cutting ability of the Paul Chen Raptor series tanto but with full tang construction for ultimate blade strength. The 5160 high-carbon spring steel blade and the checkered Kraton handle provides a sure foul-weather grip. The fiberglass scabbard construction avoids water absorption and reduces carrying weight, while several lanyard holes and the included ParaCord provide carrying and backpack attachment options. Specifications: Overall: 42,55 cm Blade Length: 27,94 cm Handle Length: 12,06 cm Weight: 382,72 g Blade Steel: 5160 Specs will vary slightly from piece to piece.

€319.00*
Ensure 319 bonus points

Item is in field warehouse, long distance shipping.

Practical Tai Chi Sword, 71,12 cm
T'ai Chi Ch'üan, Taijiquan, Tai Chi Chuan, or commonly Tai Chi or Taiji, is a Nei chia ("internal") Chinese martial art which is known for the claims of health and longevity benefits made by its practitioners and in some recent medical studies. T'ai Chi Ch'uan is also known as a "soft style" martial art. T'ai Chi forms are best known as the slow motion routines groups of people practice every morning in hundreds of parks across China and, increasingly, other parts of the world. In T'ai Chi classes one is taught awareness of one's own balance and what affects it, awareness of the same in of others, and appreciation of the practical value in one's ability to moderate extremes of behavior and attitude at both mental and physical levels. This blade was made from high carbon steel ! Details: Blade length: 71.12 cm Handle length: 16.07 cm Overall length: 87.63 cm Weight: 538 g Point of Balance: 10.16 cm Width at Guard: 2.77 cm Width at Tip: 1.9 cm Thickness at Guard: 0.53 cm Thickness at Tip: 0.28 cm

€219.00*
Ensure 219 bonus points

Item is in field warehouse, long distance shipping.

Musashi Iaito, 97,8cm Gesamtlänge
The Musashi Iaito from Paul Chen provides an economical yet authentic sword for the Iaido practitioner. It features genuine Same (Rayskin) on the Tsuka, with a tightly-woven leather Tsuka-Ito. The long tang is double-pegged for security. Named for one of the most renowned swordmasters in Japanese history and featuring the famous "double ring" iron tsuba, the Musashi Iaito is faithful to the original down to the famous double-ring iron tsubas. Specifications Overall: 38 ½” Blade Length: 27” Handle Length: 10 ½” Weight: 1lb 14oz Point of Balance: 5" Width at Guard: 1.19" Width at Tip: .88" Thickness at Guard: .25" Thickness at Tip: .18" Sori: 3/4" Specs will vary slightly from piece to piece.

€829.00*
Ensure 829 bonus points

Item is normally available in about 4-6 weeks.

Renaissance Rapier
This Swept-Hilt Rapier features classical lines, with a high-carbon steel flex-tempered blade, a stainless steel hilt (for reduced maintenance) and a hardwood grip. The hilt is of the same size as the museum piece on which it is based, providing an authentic “feel” in the user’s hand and weight and balance also match originals. The Renaissance-style Rapiers trace their origins to early 17th century Europe, where swordplay with the Rapier was considered an essential part of a gentleman’s education and was often used in resolving gentlemanly disagreements. Blades generally originated in one of the blade making centers such as Toledo or Solingen, but many differences in styling and hilt materials resulted from the local manufacture of hilts all over Europe. Key Features: * historical design * Steel basket * Rigid scabbard For this Rapier a replacement blade is available # 13674 Details: Overall length: 113.67 cm Blade length: 93.6 cm Blade thickness: 0.61 to 0.25 cm (from guard to tip) Handle length: 20.64 cm Weight: 898 g

€399.00*
Ensure 399 bonus points

Item is normally available in about 4-6 weeks.

Oda Nobunaga Kabuto
Our Japanese kabuto and mempo are superbly constructed, beautifully detailed and a great value. These models replicate the helms of the great Daimyo Takeda Shingen, Oda Nobunaga and Date Masamune respectively. Some of the models are, based on a museum piece of unknown provenance, doubles as an exquisite stand for a katana and wakizashi set. All four pieces are equipped with leather inserts allowing them to be worn. Custom designed wooden display stands are included. KEY FEATURES: Authentic styling Wearable Great decorator item MEASUREMENTS: BOX HEIGHT: 51.44 cm BOX WIDTH: 44.45 cm

€548.99*
Ensure 549 bonus points

Item is in field warehouse, long distance shipping.

Raptor Tanto
The Raptor Series has been designed for the cutting practitioner who does not necessarily have access to mats but who wishes to practice and perfect his cutting technique. The blades are forged in 5160 high carbon steel and specially heat treated to produce very high resilience and greater tolerance of misdirected cuts than a conventional differentially tempered blade. The edge geometry is configured to facilitate the cutting of both soft and semi-hard materials without chipping, allowing the cutter a wide choice of targets. Made by Hanwei. Details: Overall length: 42,2 cm Blade length: 27,5 cm Handle length: 11,75 cm Overall weight: approx. 0,96 kg Material: 5160 High carbon steel Specs will vary slightly from piece to piece.

€329.00*
Ensure 329 bonus points

Item is normally available in about 4-6 weeks.

The Sword of Saint Maurice
The Sword of St. Maurice - Oakeshott XI.4 This long and slender single handed sword is a reproduction of the one housed in Vienna that dates from the late 11th to early 12th Centuries. This version of the sword leaves behind the likely later additions to the grip and envisions what an earlier version of the sword may have looked like. Certainly a coronation sword of the Holy Roman Empire the hilt is adorned with the Arms of the Empire eagle crest on one side of the pommel and the personal arms of Otto IV (1198-1218) on the other. The guard is engraved with 'CHRISTUS VINCIT, CHRISTUS REGNAT, CHRISTUS IMPERAT.' (Christ Conquers, Christ Reigns, Christ Rules) used in an antiphon of the coronation anthem as well as a war cry used in the Third Crusade. Oakeshott's Type XI swords are slender, mostly parallel blades with a long and thin fuller. This sword is on the longer side of the type with exceptional proportions. A solid wood core scabbard is included. Specifications Overall: 43" Blade Length: 37 1/4" Handle Length: 3 3/4" Weight: 2lb 13oz Point of Balance: 7" Point of Harmonics: 25" Blade Steel: 1566 Hrc Edge: 52-54Hrc Specs will vary slightly from piece to piece.

€549.00*
Ensure 549 bonus points

Item is in field warehouse, long distance shipping.

Sir William Marshall Sword
Our single-hand Marshall Sword sets new standards of quality and authenticity in broadsword construction. The sword is based on an original, now in a British musuem, used by one of England´s finest knights, Sir William Marshall, who served the crown faithfully under Henry II, Richard the Lionheart and Jack Lackland. The single-hand Marshall Sword is available with either a forged high-carbon steel blade or a forged - folded Swedish powder steel blade Both blades are identical in handling characteristics and both are tempered to a tough HRC 52. The blade section features a central ridged fuller and full-length distal taper - a tough test for the bladesmith but resulting in a superb combination of speed and strength. The grip is leather wrapped and laced and the guard and pommel are elegant in their functional simplicity. The scabbard is leather-covered with steel mounts. Truly a sword for the connoisseur. This sword comes with a sharp blade. Key Features: Authentic replica of a museum piece. Excellent balance Fully functional Measurements: BLADE LENGTH: 33 1/4" HANDLE LENGTH: 6 3/4" OVERALL LENGTH: 40" WEIGHT: 1,3 kg THICKNESS: .235

€499.00*
Ensure 499 bonus points

Item is in field warehouse, long distance shipping.

Barbute Helmet
Dating from the 15th century, the barbute shows a strong resemblance to much older Corinthian helmets. Originating in Italy, the Barbute saw widespread use throughout Europe. Fully wearable, the helm is constructed in 18 gauge stainless steel and fitted with an adjustable lining. The optional helmet stand is a simple means of displaying the Helm to full advantage. Key features: Stainless for minimal maintenance Fully wearable Authentic styling Details: Total height: 32.39 cm Total length: 22.23 cm Total width: 22.23 cm Weight: 1360.8 g

€198.00*
Ensure 198 bonus points

Item is normally available in about 4-6 weeks.

Early Medieval Single Hand Tinker Pearce Blunt Trainer
The Early Medieval Sword is typical of the 13th-14th century single hand swords but the Type XII blade was known to be in use from as early as the late Viking era. This blunt trainer features a Marquenched spring steel blade and is an exceptional match for the I.33 sword and buckler study. As with all Medieval Tinker models, this sword is dismountable. CAS has commissioned Michael `Tinker` Pearce to design a line of swords that will satisfy both the sparring and cutting needs of Western Martial Arts practitioners. Matching sharp and blunt versions of each sword in the series offer the same outstanding handling characteristics in both disciplines. The swords meet Tinker`s exacting quality requirements and are built in much the same way as his custom pieces. Each blade is forged from 5160 spring steel, Marquenched to the desired hardness of 50-53 HRC while the tang is drawn back to the low 30s HRC. For the Medieval models the very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dismantling of the hilt assembly for inspection, to exchange blades if needed, and for anyone wanting to easily customize their grip. Also the sharp and blunt blades are interchangeable on all Medieval models. The grips are cord wrapped and leather covered wood and tapered for a comfortable grip. Each sword is supplied with a leather covered wood scabbard with metal throat and chape.

€409.00*
Ensure 409 bonus points

Item is in field warehouse, long distance shipping.

Tea Culture Wakizashi
In Japan the traditional method of serving tea is a celebrated art form in itself. This highly ritualized ceremony is an involved process, the most elaborate of which can last hours and is reserved for the most distinguished of guests. Our Tea Culture Daisho captures the essence of this important tradition. The Katana and Wakizashi are built upon a traditional Shinogi Zukuri style blade with Bo-Hi. The high-carbon blade is hand forged and differentially tempered using the traditional clay method. The Koshirae (furniture) feature the typical elements present in a Japanese tea ceremony. The handle is wrapped with suede leather in a Katate Maki (battle wrap) style. KEY FEATURES: * Forged High-Carbon Blade * Authentically constructed * Battle Wrap Ito MEASUREMENTS: Blade length: 18" Handle length: 6 1/2" Overall length: 28 3/4" Weight: 2lbs

€1,299.00*
Ensure 1299 bonus points

Item is normally available in about 4-6 weeks.

Torino Main Gauche
Matching Hanwei's Torino Rapier, the Torino Main Gauche provides an authentically-styled parrying weapon, with a high-carbon steel blade and a stainless steel hilt (for reduced maintenance). Specifications: Overall: 17 3/4" Blade Length: 11 5/8" Handle Length: 5 3/7" Weight: 16 oz Width at Guard: 21mm Width at Tip: 2.4mm Thickness at Guard: 5mm Thickness at Tip: 1.5mm Blade Steel: 1566

€279.00*
Ensure 279 bonus points

Dieser Artikel hat eine Lieferfrist von ca. 4-6 Wochen.

Practical Tanto
The Practical Series represents our most popular set, offering excellent quality at a great price. The blades are hand-forged high-carbon steel and are differentially tempered using a traditional claying method to produce a HRC60 on the edge (ha) and a HRC40 on the back (mune) with a medium (chu) kissaki. The temper line (hamon) is authentic and prominent. The fittings (koshirae) are superbly antiqued adding to the aesthetics of the set. The saya is done in a deep black lacquer and the sageo is black Japanese cotton. The tsuka has imitation ray skin (same) on it. Cost savings are affected by using fittings, which, while making no claims to authenticity, are very strongly built to withstand the rigors of cutting exercises (tameshigiri). KEY FEATURES: Hand-forged high-carbon steel Differentially tempered Deep black lacquered saya MEASUREMENTS: BLADE LENGTH: 17.78 cm HANDLE LENGTH: 10.16 cm OVERALL LENGTH: 30.48 cm WEIGHT: 170.1 g THICKNESS: 0.64 cm

€199.00*
Ensure 199 bonus points

Item is normally available in about 4-6 weeks.

Gorin Iaito
This is a Iaito with an unedged steel blade for Iaido practice with very nice tsuba design. KEY FEATURES: * White Same w/ Matte Leather Ito, Black Cotton Sageo * Musashi Tsuba, Brushed Fuchi & Kashira * Silver Menuki, Habaki, Seppa, Shitodome Study on the use of the Japanese sword is a very serious endeavor. Students of Iaido (Way of the Sword Draw) typically learn the sword using various instruments. Most likely they will begin with a bokken / bokuto (wooden sword) and then an Iaito (un-edged training sword) before handling a Shinken (live sword). Iaito are an integral tool in the learning process allowing students to practice with a sword with a sense of safety for themselves and for those around them. Iaito by CAS Hanwei are light (less than 2lbs.) and extremely well balanced to reduce the wear-and-tear on specific joints. The un-edged blades are crafted in 400 series stainless steel with a simulated hamon and are fully tempered to withstand repeated drawing and practice cutting strokes. Each blade features a bo-hi (groove), which both reduces blade weight and produces an audible feedback when practice cutting strokes are made correctly. We offer three distinct models with various fittings. Each model comes in 4 blade lengths 26"-29". Frequent Drawing Practice These unedged training blades provide for safe drawing for the beginning practitioner of the 450 year old art of Iaido. Forged from stainless steel the tempered blades are not only maintenance-free but more importantly provide the correct weight and balance needed for the rigors of repetitive drawing and sword motion practice. Each blade has a deeply cut groove (bo-hi) to provide audible feedback when swung properly. You can get this iaito in different blade lengthes. MEASUREMENTS for all length: Handle length: 10 3/4" Point of Balance: 4 1/2" Width at Guard: 1.27" Width at Tip: .8" Thickness at Guard: .23" Thickness at Tip: .21" Sori: 3/4" MEASUREMENTS for the different Blade length: Blade length: 26" Overall length: 37 3/4 Weight: 1lb 13oz Blade length: 27" Overall length: 38 3/4 Weight: 1lb 14oz Blade length: 28" Overall length: 39 1/2 Weight: 1lb 14oz Blade length: 29" Overall length: 40 3/4 Weight: 1lb 15oz The length of an iaito is normally measured in japanese shaku (1 shaku = 11,9 inch). The next table shows how long your iaito has to be according to your height. Körpergröße Body Height Shaku Länge in cm Length in Inch 155 - 160 cm 5 ft 1 in - 5 ft 3 in 2,30 shaku 67.7 cm 26,7 inch 160 - 165 cm 5 ft 3 in - 5 ft 5 in 2,35 shaku 71,2 cm 28 inch 165 - 170 cm 5 ft 5 in - 5 ft 7 in 2,40 shaku 72,7 cm 28,6 inch 170 - 175 cm 5 ft 7 in - 5 ft 9 in 2,45 shaku 74,2 cm 29,2 inch 175 - 180 cm 5 ft 9 in - 5 ft 11 in 2,50 shaku 75,8 cm 29,8 inch 180 - 185 cm 5 ft 11 in - 6 ft 1 in 2,55 shaku 77,3 cm 30,4 inch 185 - 190 cm 6 ft 1 in - 6 ft 3 in 2,60 shaku 78,8 cm 31 inch

€1,389.00*
Ensure 1389 bonus points

Item is normally available in about 4-6 weeks.

Uesugi Katana
Uesugi Kenshin was one of feudal Japans most unique and honorable daimyo of Senkugo period. Being born Nageo Kagetora, a third or fourth son, his early years were those of quiet and study until his sickly older brother’s incompetence to rule caused family friends to encourage him to challenge his sibling’s station. After wrestling control from his brother and several well-planned alliances, adoption as heir of the Uesugi klan, some changes in titles in land and several military victories, he rose in power and became known by many names, but specifically the “Dragon of Echigo.” He became renowned for reforms in commerce and agriculture in securing his lands and raising the standard of life for his people.As the legendary Takeda Shingen expanded his territory and power, he soon found his borders under siege and thus began their great rivalry. Mostly just indecisive skirmishes in the beginning, their fourth encounter which would be their largest, the Battle of Kawanakajima, Kenshin employed a new strategy of rotating soldiers on the front line with fresh troops nearly winning the battle. So pitched was this battle Kenshin rode up to Shingen and slashed at him by which Takeda deflected with his famed war fan. Yet depending on whose statistics you believe; many scholars consider this encounter a draw.Such respect Uesugi had for Shingen, when Takeda broke with the Hojo clan who soon after boycotted the Kai Province of salt, Kenshin sent his rival salt from his own province with the message, “I do not fight with salt, but with the sword.” Even at Takeda Shingen’s death, Kenshin said “I have lost my good rival. We won't have a hero like that again!” But even after his rival’s death, Kenshin found a new one in the rising power of Oda Nobunaga. Continuing our series, this beautiful katana features the embossed likeness of Uesugi Kenshin replicated from Japanese artwork. The 27 1/4" forged T10 steel blade cuts as well as it looks. The fuchi and kashira are blackened with gold detailing. The gold dragon menuki are over laid with a black cotton handle wrap over real ray skin. The matte black textured painted saya completes the piece with a subdued and humble finish. Specifications Overall: 41 1/4" Blade Length: 27 1/4" Handle Length: 12 3/4" Weight: 2 lbs 10 oz Sori: 5/8" Blade Steel: T10 Hrc Edge: 60 Hrc Back: 40 Specs will vary slightly from piece to piece.

€659.00*
Ensure 659 bonus points

Item is normally available in about 4-6 weeks.

Japanese Sword Bag - Fret Pattern
Hanwei's Sword Bags provide added protection and a little style to the otherwise black padded cases used when transporting swords. These bags are especially needed when carrying multiple swords to keep sayas and metal fittings from being damaged in transit. They are also perfect for keeping swords in pristine condition when in storage.The top is simply folded over and the extra long cords tied off below the guard of the sword to secure the bag. Available in several classic patterns.Key Features: • Adds a Touch of Style to Your Sword Collection • High Quality Woven Bag and Tassles • Additional Padding for Storage or Transportation of Samurai SwordsDetails: Weight: 142 g

€49.01*
Ensure 50 bonus points

Item is in field warehouse, long distance shipping.

Gustav Rapier, Antiqued
This "antiqued" version of the Gustav Rapier features a hilt finish, developed by Hanwei, that allows a museum-quality patina to be applied to stainless steel while the non-corroding properties of the steel are retained. This finish is very attractive and gives an authentic appearance to the sword. The blade is interchangeable with our “Practical” blade which is designed for safety in rapier sparring. The matching Main Gauche may also be equipped with a sparring blade. Specifications Overall: 45 5/8" Blade Length: 36 1/2" Handle Length: 3 5/8" Weight: 2lb 6oz Point of Balance: 1" Thickness at Guard: 6.4mm Thickness at Tip: 2.3mm Specs will vary slightly from piece to piece.

€599.00*
Ensure 599 bonus points

Item is normally available in about 4-6 weeks.

Musashi XL Katana
Miyamoto Musashi, arguably the most famous swordmaster in Japanese history, fought more than 60 duels before retiring and writing his famous treatise on swordplay, the "Book of Five Rings". Development of the two-sword style of swordplay, with the Daito (long sword) and Wakizashi being used together, is credited to Musashi. Mounted in black, the Musashi Katana is faithful to the original down to the famous double-ring iron tsubas. The tsuka-ito is in leather over ray skin. The blade is hand-forged in high-carbon steel, with new geometry to enhance cutting ability. Designed strictly for competitive cutting, our XL Katana blades incorporate the geometry, strength, weight and profile needed for successful cuts on substantial targets. Featuring differential heat treatment and a narrow edge angle, these wide blades will reward good technique with clean cuts and excellent durability. Edge hardness is HRC60, back hardness HRC40. The grip is double-pegged to the tang for safety. Supplied with a protective cloth bag. KEY FEATURES: * Massive XL Blade Geometry * Authentically constructed * Built for Martial Artists MEASUREMENTS: Blade length: 28 ½" Handle length: 11" Overall length: 41" Weight: 2lb 11oz Point of Balance: 5 1/2" Width at Guard: 1.44" Width at Tip: 1.14" Thickness at Guard: .25" Thickness at Tip: .16" Sori: 3/4"

€799.00*
Ensure 799 bonus points

Item is normally available in about 4-6 weeks.

Practical Wakizashi
The Practical Wakizashi gives the martial artist the opportunity to own and use a Hanwei sword at the cost of an economy sword. The blade is forged and differentially tempered, using the same process as the more expensive blades and producing an HRC 60 edge and HRC 40 back. The temper line is authentic and prominent. The blade comes sharp. A black high gloss saya and a protective cloth bag are included in delivery. Details: Total length: 27 1/2" Blade length: 20" Blade width: 1.1" Blade thickness: .24" Handle length: 6 1/2" Weight: 700 g

€329.00*
Ensure 329 bonus points

Item is normally available in about 4-6 weeks.

Raptor Shobu Zukuri
The Raptor series, our new line of cutting katanas, has been designed for the cutting practitioner who does not necessarily have access to mats but who wishes to practice and perfect his cutting technique. The blades are forged in 5160 high-carbon steel and specially heat treated to produce very high resilience and greater tolerance of misdirected cuts than a conventional differentially tempered blade. The edge geometry is configured to facilitate the cutting of both soft and semi-hard materials without chipping, allowing the cutter a wide choice of targets. The Raptor Shobu-Zukuri(Iris Leaf) blade has an elegant shape and powerful cutting ability. Notable for the absence of a Yokote transition, this blade design became popular during the Nanbokucho era (1336 ~1392 AD) and its popularity continued into the Muromachi period. Details: Overall length: 45.5" Blade length: 29" Handle length: 13" Weight: 2lb 12oz 5160 high-carbon steel Details will vary slightly from piece to piece.

€599.00*
Ensure 599 bonus points

Item is in field warehouse, long distance shipping.

Tonbo Wakizashi
The blade of the Tonbo wakizashi is hand-forged and folded from powder steel, with a medium-length (chu) kissaki. The saya is a deep black lacquer featuring gold dragonflies. High quality ray skin (same) is used on the tsuka. The tsuka-ito is made of premium purple Japanese cotton. The tsuba is crafted in black iron, with detailing in gold and bronze and an exquisite dragonfly scene decoration. The silk sageo compliments this piece and is elegently woven in dark blue and black. The fuchi and kashira are black with bronze and brass detailing, and the kojiri, koiguchi and kurikata are of polished buffalo horn. The habaki is a one-piece brass construction. Key Features: • Hand forged and folded steel blade • Silk sageo • Traditional Construction Specifications Overall: 27 1/4" Blade Length: 19 1/2" Handle Length: 6 1/2" Weight: 1lb 7oz Point of Balance: 3 3/4" Sori: 1/2" Blade Steel: K120C Specs will vary slightly from piece to piece.

€1,319.00*
Ensure 1319 bonus points

Item is in field warehouse, long distance shipping.

Mercenary Sword
The Mercenary is an imposing yet well-balanced two-handed sword in the 15th century style. Featuring a triple-fullered blade, steel S-curve guard and scent stopper pommel, this is a desirable piece for the well-armed soldier of fortune. Supplied with a belt scabbard, the Mercenary is also an ideal match for our back scabbard. This sword comes with a sharp blade. BLADE LENGTH: 35" OVERALL LENGTH: 47" WEIGHT: 4lbs THICKNESS: .22"

€429.00*
Ensure 429 bonus points

Item is in field warehouse, long distance shipping.

Agincourt Sword
The Agincourt, an English-style single-hand sword, commemorates one of the memorable battles of the Hundred Year´s War between England and France. The sword features an ebony handle with a steel-hilted finish. A quality leather scabbard is provided for ease of transportation. This sword comes with a sharp blade. Key Features High-carbon spring steel Authentic look and feel Great for the re-enactor Measurements BLADE LENGTH: 27 1/4" OVERALL LENGTH: 36 3/4" WEIGHT: 3lbs 2oz THICKNESS: .19"

€349.00*
Ensure 349 bonus points

Item is in field warehouse, long distance shipping.

Basket Hilt Broadsword
Although Basket-Hilt swords appeared throughout Britain from the mid-sixteenth century on, their association with the the seventeenth and eighteenth century highlander has become legendary. Our Basket-Hilt Broadsword carries a typical Glasgow-style hilt from the mid-eighteenth century. It is likely that the blade of the original sword was made in Germany a century earlier and re-hilted as basket designs were refined. Although the blade of the original bears the "Andrea Ferara" name, it is unlikely that it was made by this renowned Spanish swordsmith, as many good quality blades of the period were so marked (in various spellings!), irrespective of the actual maker. The forged double-edged blade of our sword is in fully tempered high-carbon steel with a solid steel basket. The grip is wire-wrapped rayskin and the basket liner is of felt-covered leather. This sword comes with a sharp blade. KEY FEATURES: Authentic replica of Museum Piece Fully functional Scabbard included MEASUREMENTS: BLADE LENGTH: 85.09 cm HANDLE LENGTH: 15.24 cm OVERALL LENGTH: 100.33 cm WEIGHT: 2438.1 g

€589.00*
Ensure 589 bonus points

Item is normally available in about 4-6 weeks.

Iga Ninja-To
The neighboring Kouga and Iga clans of feudal Japan were bitter enemies for centuries and their warring Ninja families have been immortalized in Japanese literature. To commemo- rate these secretive warriors we have introduced our Kouga and Iga Ninja-To. The Tsuka of the Iga Ninja-To features a traditional wrap over natural rayskin and Clouds and Sun/Water and Moon Menuki. The blackened iron fittings include a Tsuba displaying the Iga Mon and a wave motif, both repeated on the Fuchi/Kashira. The Saya features a partial rattan wrap and a heavily reinforced spike. The Iga features a forged high carbon blade, differentially quenched to an edge hardness of 60HRc. Essential tool for the Ninjutsu practitioner. Special features: - Forged high-carbon steel blade - High quality fittings - Rattan wrapped saya Made by Hanwei. Details: Weight: approx. 993 g Overall Length: approx. 84 cm Blade Length: approx. 56 cm Blade Material: High Carbon Steel Handle: wrapped with natural rayskin Handle Length: approx. 27 cm

€679.00*
Ensure 679 bonus points

Item is in field warehouse, long distance shipping.

Tsuru Iaito – 74 cm Blade
Our Tsuru Iaito are a breakthrough in design and functionality. Made of a special stainless steel, they are much more durable than aluminum alloy Iaito. Steel has the “feel” of a live blade and is not prone to distort when making a practice cutting stroke. These very affordable practice swords fro Hanwei are the ideal training tools for safely practicing the ancient art of Iaido. Details: Overall: 40 3/4 Blade Length: 29 Handle Length: 10 1/2” Weight: 1lb 15oz Point of Balance: 4 1/2" Width at Guard: 1.27" Width at Tip: .80" Thickness at Guard: .23" Thickness at Tip: .21" Sori: 3/4"

€1,190.00*
Ensure 1190 bonus points

Item is normally available in about 4-6 weeks.

Japanese Sword Bag - Stripe Pattern
Hanwei's Sword Bags provide added protection and a little style to the otherwise black padded cases used when transporting swords. These bags are especially needed when carrying multiple swords to keep sayas and metal fittings from being damaged in transit. They are also perfect for keeping swords in pristine condition when in storage.The top is simply folded over and the extra long cords tied off below the guard of the sword to secure the bag. Available in several classic patterns. Key Features: Adds a Touch of Style to Your Sword Collection High Quality Woven Bag and Tassles Additional Padding for Storage or Transportation of Samurai Swords Weight: 5 oz Specs will vary slightly from piece to piece.

€39.00*
Ensure 39 bonus points

Item is in field warehouse, long distance shipping.

Cromwell Sword
Oliver Cromwell (1599 - 1658) was a powerful figure in English history during and after the English Civil War, when he rose from the rank of Captain of Horse to Lord Protector of England. His sword, said to have been carried at the battle of Drogheda in 1649, has been remarkably well preserved and features in the collection of the Royal Armouries in Leeds, England, where it is displayed in the permanent collection. Our Cromwell Sword is an accurate replica of the original "mortuary" hilt style and features a blackened guard decorated in a gold foliage pattern with a wire-wound sharkskin grip. As the original sword now lacks a scabbard , we have provided a design typical of the period. This piece of English history is a must for the ECW collector and re-enactor. This sword comes with a sharp blade. Details Highly Detailed Historically Authentic Measurements BLADE LENGTH: 32 ¾" HANDLE LENGTH: 6" OVERALL LENGTH: 43 ½" WEIGHT: 3lb 4oz

€599.00*
Ensure 599 bonus points

Item is normally available in about 4-6 weeks.

Cayuga
The top-quality full-tang hunter features a forged blade in HWS-1K with full taper tang. Edge hardness is 58-60HRc. The handle scales are genuine Sambar stag and the stainless steel guard features electroformed scroll engraving. Sheath construction is bark-tanned leather with stainless steel reinforcing at the wear points. Made by Hanwei. Details: Length: 24.4 cm Blade length: 11.4 cm Weight: 283 g Blade steel: HWS-1K Specs will vary slightly from piece to piece.

€149.00*
Ensure 149 bonus points

Item is normally available in about 4-6 weeks.

Golden Oriole Wakizashi
During the Muromachi period (1568-1603), the introduction of the pairing of the Katana (the curved sword) and Wakizashi was introduced. The Wakizashi, or the shorter companion blade to the Katana, was about 18 inches long. Only the warrior class - the Samurai - was allowed to wear the two swords, which remained a custom for the next several hundred years until abolished in the 19th century. This Wakizashi is the companion piece to the Golden Oriole Katana, with matching fittings and blade construction. Supplied with protective cloth bag. KEY FEATURES: Hand forged high-carbon steel Built for cutting Traditional construction MEASUREMENTS: BLADE LENGTH: 20 ¾" HANDLE LENGTH: 7 1/4" OVERALL LENGTH: 28" WEIGHT: 1lb 8oz

€929.00*
Ensure 929 bonus points

Item is normally available in about 4-6 weeks.

Glacier
Lockback Folder with a Clip Point Style Blade from Rock Creek Knife Line made by CAS Hanwei. Forged from a high-alloy steel (HWS-2) proprietary to Hanwei, formulated for toughness, abrasion resistance (edge-holding) and corrosion resistance. The blade is hollow ground for easy edge maintenance and ground from approx. 0.31 cm stock. The frame is built in solid stainless steel with a Rosewood handle treatment. Features a removable pocket clip of Hanwei’s own design. Key Features: - Forged Steel - Corrosion Resistant - Edge Holding/ Ease of Sharpening Details: Weight: approx. 142 g Overall Length, closed: approx. 11 cm Blade Length: approx. 8 cm Blade Material: HWS-2 Handle Material: Rosewood Manufacturer: Hanwei

€55.00*
Ensure 55 bonus points

Item is normally available in about 4-6 weeks.

Henry V Sword
The Henry V Sword is modelled after the sword hung over the tomb of one of England´s great warrior kings. The single-handled cut-and-thrust weapon combines a relatively short sturdy blade with elegant down-swept quillons and a wheel pommel. A sword fit for a king! This sword comes with a sharp blade. Details: Blade length: 70.5 cm Handle Length: 11 cm Overall length: 88.5 cm Quillons: 20 cm Knob diameter: 6 cm Weight without scabbard: 1.5 kg Weight with scabbard: 1.8 kg

€349.00*
Ensure 349 bonus points

Item is in field warehouse, long distance shipping.

Viking Short-Bladed Spear
The decorated spearheads demonstrate the Viking´s creative mix of art and war, whereby weapons often carried intricate patterns, created using the "Niello" process. This involved using an alloy of several metals (notably silver) mixed with sulfur which was rubbed into an incised pattern and then fired. Where the alloy is rubbed into the engraving, it remains black while the rest of the surface is polished to a bright finish. Our decorating process uses a little less alchemy, but still provides a lustrous, permanent Niello-like effect. Each spearhead has a shaft diameter of 1". Spearheads only are supplied. The Viking Short Bladed Spear is typical of those of Celtic origin, imported into Scandinavia. The short blade, inherently stiffer and more resistant to bending or breaking, was capable of piercing any body armour of the period. Key Features: Historically accurate Antiqued Finnish Fully functional Specifications: Blade length: 6" Overall length: 9 3/8" Weight: 7oz Thickness at Guard: .510"

€94.90*
Ensure 95 bonus points

Item is in field warehouse, long distance shipping.

Practical Katana
The ever-popular Practical Katana gives the martial artist the opportunity to own and use a Hanwei sword at the cost of an economy katana sword. The blades are forged and differentially hardened, using the same process as the more expensive katana blades and producing an HRC 60 edge and HRC 40 back. The temper line is authentic and prominent. Cost savings are effected by using fittings which, while making no claims to authenticity, are very strongly built to withstand the rigors of cutting exercises in the dojo. The Practical Wakizashi and Practical Tanto match the katana and provide a useful and economical set. Please note: the katana, wakizashi or tanto’s sageo (cord) on the saya (scabbard) may not be wrapped as pictured. Sageo color may vary. Specifications Overall: 39 1/2" Blade Length: 27 1/4" Handle Length: 11 1/4" Weight: 2lb 6oz Point of Balance: 5 3/4" Width at Guard: 1 1/4" Width at Tip: 4/5" Thickness at Guard: 1/4" Thickness at Tip: 3/16" Sori: 3/4" Blade Steel: 1566 Hrc Edge: 60 Hrc Back: 40 Specs will vary slightly from piece to piece.

€519.00*
Ensure 519 bonus points

Item is normally available in about 4-6 weeks.

%
Classic Tiger Wakizashi
The return of a classic pairing .. our Tiger Wakizashi from Hanwei is nostalgic reissue of the original folded steel katana made in the early 2000s. The specifications are painstakingly reproduced for accurancy. The K120C powder steel blade is differentially tempered with a traditional claying method to the grain patter (hada) showing distinct layers. The temper line (hamon) is evident and prominent. the blade features groove (bo-hi) on both sides. The tsuba is made from blackened iron depicting a "stalking tiger" inlaid in brass. The ray skin (same) is covered on the handle (tsuka) with Japanese Cotton. The saya is deeply lacquered in black and inlaid with brass bamboo leaves. Specifications: Overall: 26 1/4" Blade Length: 19 1/2" Handle Length: 5 7/8" Weight: 1 lbs 7 oz Sori: 1" Blade Steel: K120C Hrc Edge: 60 Hrc Back: 40 Specs will vary slightly from piece to piece.

€1,135.20* €1,290.00* (12% saved)
Ensure 1136 bonus points

Item is in field warehouse, long distance shipping.

Celestial Katana
The celestial bodies pull at the water’s edge and create the tide, the ebb and flow of waves that bring time and balance to our world. As the samurai warrior must give and take with the ever-flowing tides of life, the Celestial Katana reflects all the harmonious aspects of the heavens and the sea.A beautiful 27 5/8” L6 blade featuring a straight hamon line symbolizing placidity. The kashira and tsuba juxtaposes the hamon with a depiction of turbulent sea with waves crashing against the rocks. The tsuka features black cotton sageo over white same with multi-finish planetary menuki. The saya sparkles with a beautiful silver flake with a gloss polish with a buffalo horn kojiri, kurikata and koiguchi adorned with a navy and white sageo.Bainite is a structure of high-carbon steel that combines great strength with excellent flexibility and shock absorption characteristics. It has been known as an exemplary Katana blade component for a number of years but its use has been restricted to a few top-class master smiths, due to the difficulties involved in performing the exacting heat treatment procedures necessary for the production of a Bainite blade body in combination with the very hard Martensite Yakiba (edge section) required for Katana blades. Hanwei has now mastered this difficult process, using billets of L-6 tool steel (a very tough high-carbon low-alloy steel) as a starting point. Blades are forged and shaped in the normal way, then carefully heat treated to achieve the required Bainite and Martensite structures before final polishing. Key Features: L6/Bainite Katana Blade Traditional Construction Designed for Martial Artists Specifications Overall: 39 3/8” Blade Length: 27 5/8” Handle Length: 10 ½” Weight: 2.3 lbs Sori: .5" Blade Steel: L6 Hrc Edge: 58~60 Hrc Back: 38~42 Specs will vary slightly from piece to piece.

€2,199.00*
Ensure 2199 bonus points

Item is normally available in about 4-6 weeks.

Bamboo Mat Katana
The Bamboo Mat Katana features a chu-kissaki blade of Hanwei's own high-alloy HWS-2S steel, which combines impressive performance with a striking O-choji hamon. This steel is made in Hanwei's new factory, with high-tech equipment, producing a very pure, advanced-metallurgy blade with excellent edge-holding capability and resilience. The fittings feature a bamboo-themed black iron tsuba, textured in a bamboo mat design with a jointed bamboo rim and highlighted with gold-tipped bamboo leaves. The fuchi/ kashira follow the same theme and the golden menuki feature a pair of sparrows. The saya is finished in high-gloss lacquer with horn fittings. Details: Weight: approx. 1248 g Overall Length: approx. 102 cm Blade Length: approx. 73 cm Blade Material: HWS-2S Handle Length: approx. 28 cm

€1,389.00*
Ensure 1389 bonus points

Item is in field warehouse, long distance shipping.

Hand and a half sword
Swords made from Paul Chen, with a full tang construction and a riveted blade at the end. Blade Material AISI 1090 Carbon Steel forged, Guard and pommel made from steel. Wooden handle with leather. Blade thickness 2.5 mm, rounded tip. ABS scabbard with metal mountings. Blade length: 87 cm Total length: 112 cm Handle length: 17 cm Max. Blade width: 4.8 cm Blade thickness: 6 mm Size of the guard: 18 cm Weight without scabbard: 1550 g Weight with scabbard: 1500 g Category 2: These swords are likewise suitable for beginners and advanced fighters. All category 2 swords feature high-quality carbon steel blades which hardly show any scratches when used against other blades. The pommels are riveted at the end of the tang.

€319.00*
Ensure 319 bonus points

Item is normally available in about 4-6 weeks.

Tinker Longsword Replacement Blade blunt
This is the replacement blade for Tinker Longsword Blunt. This blade is great for Replacement instead of buying a complete new sword. Each replacement blade is forged from 5160 Spring Steel, marquenched to the desired hardness of 50-53 HRC while the tang is drawn back to the low 30s HRC. The very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dismantling of the hilt assembly for inspection or to exchange blades if needed. The replacement blade is designed to work with the Tinker Longsword only. Made by Hanwei. Measurements: Blade Length: 88,9 cm

€169.90*
Ensure 170 bonus points

Item is normally available in about 4-6 weeks.

Shamshir
The shamshir came to notoriety in the Persian empire around the 12th century, and more notably in the 13th century with the Mongol invasion. A versatile weapon on foot or in the mount, the long, deeply curved blade was capable of devasting deep cuts and some thrusts which makes for an excellent calvary sword. Its five-century evolution came to a pinnacle during the Ottoman Empire to what we perceive as a shamshir today.Hanwei’s Shamshir pays tribute to the craftsmanship and excellence of the blades of the past with keeping true to form on the classic stylings. The 33” steel blades have over 2” of curvature with a balance point of 8 ½” inches. The full tang handle features a gorgeous rosewood handle. The hilt and black leather scabbard fittings are stainless steel. The Hanwei Shamshir can be a formidable weapon or an excellent collector’s piece. Only the soul who wields it can decide. Specifications Overall: 38 1/2" Blade Length: 32" Handle Length: 4 3/8" Weight: 2 lbs 1 oz Point of Balance: 8 1/2" Sori: 2 1/4" Blade Steel: 5160

€779.00*
Ensure 779 bonus points

Item is normally available in about 4-6 weeks.

Celtic Sword
The Celtic Sword , popular with Celtic re-enactors, has an anthropomorphic hilt and leaf-shaped blade. Solid brass hardware, a macassar ebony grip and leather scabbard make this piece ideal for the Celtic persona. This sword comes with a sharp blade. KEY FEATURES: * High-carbon spring steel * Authentic look and feel * Great for the re-enactor MEASUREMENTS: BLADE LENGTH: 23 1/2" OVERALL LENGTH: 29 3/4" WEIGHT: 2lbs 12oz THICKNESS: .23"

€394.90*
Ensure 395 bonus points

Item is in field warehouse, long distance shipping.

Practical Iaito, Blade length 28"
Iaito Frequent Drawing Practice : Our Practical Katanas have always been at the forefront of providing economical yet functional swords to the martial arts community. Now with the blade geometries and profiles of the performance series and the affordability of our Practical fittings, competition-standard swords are within the reach of the tightest budget. This is an unedged training blade for the practice of Iaido. Forged from stainless steel the tempered blades are not only maintenance-free but more importantly provide the correct weight and balance needed for the rigors of repetitve drawing and sword motion practice. Each blade has a deeply cut groove (bo-hi) to provide audible feedback when swung properly. Frequent Drawing Practice These unedged training blades provide for safe drawing for the beginning practitioner of the 450 year old art of Iaido. Forged from stainless steel the tempered blades are not only maintenance-free but more importantly provide the correct weight and balance needed for the rigors of repetitive drawing and sword motion practice. Each blade has a deeply cut groove (bo-hi) to provide audible feedback when swung properly. Key Features 27" Steel dull training blade Built for Martial Artists MEASUREMENTS: Handle length: 10 1/2" Point of Balance: 5 1/2" Width at Guard: 1.27" Width at Tip: .99" Thickness at Guard: .25" Thickness at Tip: .15" Sori: 3/4" Blade length: 71.12 cm Total length: 100.33 cm Weight: 906 gr. The length of an iaito is normally measured in japanese shaku (1 shaku = 11,9 inch). The next table shows how long your iaito has to be according to your height. Körpergröße Body Height Shaku Länge in cm Length in Inch 155 - 160 cm 5 ft 1 in - 5 ft 3 in 2,30 shaku 67.7 cm 26,7 inch 160 - 165 cm 5 ft 3 in - 5 ft 5 in 2,35 shaku 71,2 cm 28 inch 165 - 170 cm 5 ft 5 in - 5 ft 7 in 2,40 shaku 72,7 cm 28,6 inch 170 - 175 cm 5 ft 7 in - 5 ft 9 in 2,45 shaku 74,2 cm 29,2 inch 175 - 180 cm 5 ft 9 in - 5 ft 11 in 2,50 shaku 75,8 cm 29,8 inch 180 - 185 cm 5 ft 11 in - 6 ft 1 in 2,55 shaku 77,3 cm 30,4 inch 185 - 190 cm 6 ft 1 in - 6 ft 3 in 2,60 shaku 78,8 cm 31 inch

€439.00*
Ensure 439 bonus points

Item is in field warehouse, long distance shipping.

Practical Ninjato
The Practical Ninja , whose construction patterns closely that of the Practical Katana, is again a workhorse built around an excellent Hanwei blade. The over-length scabbard doubles as a parrying weapon. Undoubtedly the best value available in a Ninja blade. The kuji-in (energy-channeling hand positions) of the Ninja are detailed on the iron tsuba. The Practical Ninjato #110011 differs from the Practical Shinobi Ninjato #11260 only with regard to the samé (ray skin) colour. The Practical Ninjato features white samé, whereas the Practical Shinobi Ninjato features black samé. Key features: Forged high-carbon steel blade Differential tempering Hanwei made Details: Total length: 34 1/4" Blade length: 23 3/4" Handle length: 10 1/2" Weight with Saya: 1200 g Weight without Saya: 900 g

€419.00*
Ensure 419 bonus points

Item is in field warehouse, long distance shipping.

Practical Wakizashi Plus
Practical Plus Wakizashi made as a companion piece for our Practical Plus Katana, the Wakizashi features an edge-tempered high carbon forged steel blade with a prominent hamon, genuine Same (Rayskin) on the Tsuka, and a handle wrap (Tsuka-Ito) specially developed for its gripping qualities. The fittings of the Practical Plus are decorated in a Japanese Dogwood motif with dragon menuki, and the handsome Tsuba is of an iron "sunburst" design with a brass habaki. KEY FEATURES: Fully functional Hand-forged high-carbon steel blade Differential tempering MEASUREMENTS: BLADE LENGTH: 20" HANDLE LENGTH: 6,5" OVERALL LENGTH: 28" Weight with Saya: 900 g Weight without Saya: 650 g

€419.00*
Ensure 419 bonus points

Item is normally available in about 4-6 weeks.

Raptor Shinogi Zukuri
The Raptor series, our new line of cutting katanas, has been designed for the cutting practitioner who does not necessarily have access to mats but who wishes to practice and perfect his cutting technique. The blades are forged in 5160 high-carbon steel and specially heat treated to produce very high resilience and greater tolerance of misdirected cuts than a conventional differentially tempered blade. The edge geometry is configured to facilitate the cutting of both soft and semi-hard materials without chipping, allowing the cutter a wide choice of targets. The Raptor Shinogi-Zukuri blade, which has evolved as the most common Japanese katana blade design, provides both speed and cutting power. Featuring a distinct yokote, such blades were originally produced after the Heian period, around 987 AD. Details: Overall length: 42.3" Blade length: 28" Handle length: 11" Weight: 2lb 10oz 5160 high-carbon steel Details will vary slightly from piece to piece.

€629.00*
Ensure 629 bonus points

Item is normally available in about 4-6 weeks.

Musashi Tsuba Pendant
These tsuba pendant necklaces from CAS Hanwei are crafted in sterling silver and represent iconic tsuba designs from our line of Japanese Katana. The one non-tsuba style may be recognized as the dragon from the CAS Hanwei logo! The braided neck bands feature a unique sliding closure that allows for a full range of length adjustment. Each piece is packaged in an upscale clam shell jewelry box creating an exceptional gift for the martial artist or sword collector. Key Features: o Sterling Silver o Braided Necklace o Great Gift! Specifications: Diameter: 4 cm

€35.00*
Ensure 35 bonus points

Item is in field warehouse, long distance shipping.

Tactical Katana
Based on the blade geometry and superb cutting ability of the Paul Chen Raptor series but with full tang construction for ultimate strength, the Tactical Katana is equal to any required task and then some. The 5160 high-carbon spring steel blade is sharp as ever and the checkered Kraton handle provides a sure foul-weather grip. The fiberglass scabbard construction avoids water absorption and reduces carrying weight, while several lanyard holes and the included ParaCord provide carrying and backpack attachment options. Specifications: Total: 100cm Blade length: 70 cm Handle length: 26.67 cm Weight: 1.02kg Blade steel: 5160

€499.00*
Ensure 499 bonus points

Item is normally available in about 4-6 weeks.

Raptor Nambokucho Katana
The Raptor Series has been designed for the cutting practitioner who does not necessarily have access to mats but who wishes to practice and perfect his cutting technique. The blades are forged in 5160 high carbon steel and specially heat treated to produce very high resilience and greater tolerance of misdirected cuts than a conventional differentially tempered blade. The edge geometry is configured to facilitate the cutting of both soft and semi-hard materials without chipping, allowing the cutter a wide choice of targets. Made by Hanwei. Details: Overall length: 113 cm Blade length: 76,2 cm Handle length: 34 cm Overall weight: approx. 1,3 kg Material: 5160 High carbon steel Specs will vary slightly from piece to piece.

€599.00*
Ensure 599 bonus points

Item is in field warehouse, long distance shipping.

Water Song Kung Fu sword
The Water Song Wushu Broadsword has an ultra-flexible high-carbon blade, tapering to almost paper-thin at the tip. At barely a pound in weight, the sword is very quick and the "Water Song" (caused by vibrating the blade) is very audible. KEY FEATURES: * Highly flexible blade * Very light and quick * Loud! MEASUREMENTS: BLADE LENGTH: 28" HANDLE LENGTH: 5 1/2" OVERALL LENGTH: 33 1/2" WEIGHT: 1lb 2oz THICKNESS: .180

€379.00*
Ensure 379 bonus points

Item is in field warehouse, long distance shipping.

Rapier - Bone Grip
This Swept-Hilt Rapier from Hanwei features classical lines, with a high-carbon steel flex-tempered blade, a stainless steel hilt (for reduced maintenance) and a bone grip. The hilt is of the same size as the museum piece on which it is based, providing an authentic “feel” in the user’s hand and weight and balance also match originals. The blade is interchangeable with our “Practical” blade which is designed for safety in rapier sparring. Also, you can replace the original blade. Our Renaissance-style Rapiers trace their origins to early 17th century Europe, where swordplay with the Rapier was considered an essential part of a gentleman’s education and was often used in resolving gentlemanly disagreements. Blades generally originated in one of the blade making centers such as Toledo or Solingen, but many differences in styling and hilt materials resulted from the local manufacture of hilts all over Europe. Specifications: Overall: 45 3/8“ Blade Length: 36 5/8“ Handle Length: 5 3/4" Weight: 2lb 2oz Point of Balance: 5" Point of Harmonics: 30" Width at Guard: 20 mm Width at Tip: 8 mm Thickness at Guard: 6 mm Thickness at Tip: 2.5 mm Blade Steel: 1566

€599.00*
Ensure 599 bonus points

Im Außenlager, Langstreckenversand - in 12-14 Tagen bei Dir zu Hause

Practical 11th Century Sword
Another new addition to our line of un-edged "practical" European weapons for use in re-enactment and stage combat. The Practical 11th Century Sword features a "tea-cosy" pommel and a sculptured cross that curves gently towards the blade. The broad blade has full-length fullers and is very lively for an un-edged blade. It weighs around 950 grams. Our Practical broadswords are all based on authentically styled swords in our collection but they are tailored to meet the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of today´s re-enactment societies. The blades are crafted from 1065 high-carbon steel, hardened to 50HRC, which restricts edge-notching to acceptable levels while providing resilience and protection against brittleness. While the blades are substantial, they are fullered to provide balance and good handling characteristics. They feature 2 mm wide edges and rounded tips for safety. The tangs are also substantial, with radiused corners at the blade shoulders and no welds. The end of the tang is riveted over the pommel, which both eliminates any possibility of inadvertent disassembly and provides a traditional means of tightening a loose hilt. The hardwood grips are leather-covered. The scabbards are fabricated in glass-filled resin, to provide great impact resistance, to eliminate swelling and to minimize blade corrosion problems. The scabbards now feature belt rings that adjust to allow vertical or horizontal carry. The wood-grain finish is attractive, but most re-enactors will decorate the scabbard to match their persona. MEASUREMENTS: PRODUCT LENGTH: 92 cm BLADE LENGTH: 76.5 cm PRODUCT WEIGHT: 950 grams Category 2: These swords are likewise suitable for beginners and advanced fighters. All category 2 swords feature high-quality carbon steel blades which hardly show any scratches when used against other blades. The pommels are riveted at the end of the tang.

€259.00*
Ensure 259 bonus points

Item is normally available in about 4-6 weeks.

Practical Iaito, Blade length 27"
Iaito Frequent Drawing Practice : Our Practical Katanas have always been at the forefront of providing economical yet functional swords to the martial arts community. Now with the blade geometries and profiles of the performance series and the affordability of our Practical fittings, competition-standard swords are within the reach of the tightest budget. This is an unedged training blade for the practice of Iaido. Forged from stainless steel the tempered blades are not only maintenance-free but more importantly provide the correct weight and balance needed for the rigors of repetitve drawing and sword motion practice. Each blade has a deeply cut groove (bo-hi) to provide audible feedback when swung properly. Frequent Drawing Practice These unedged training blades provide for safe drawing for the beginning practitioner of the 450 year old art of Iaido. Forged from stainless steel the tempered blades are not only maintenance-free but more importantly provide the correct weight and balance needed for the rigors of repetitive drawing and sword motion practice. Each blade has a deeply cut groove (bo-hi) to provide audible feedback when swung properly. Key Features 27" Steel dull training blade Built for Martial Artists MEASUREMENTS: Handle length: 10 1/2" Point of Balance: 5 1/2" Width at Guard: 1.27" Width at Tip: .99" Thickness at Guard: .25" Thickness at Tip: .15" Sori: 3/4" Blade length: 27" Overall length: 38 1/2 Weight: 2lb The length of an iaito is normally measured in japanese shaku (1 shaku = 11,9 inch). The next table shows how long your iaito has to be according to your height. Körpergröße Body Height Shaku Länge in cm Length in Inch 155 - 160 cm 5 ft 1 in - 5 ft 3 in 2,30 shaku 67.7 cm 26,7 inch 160 - 165 cm 5 ft 3 in - 5 ft 5 in 2,35 shaku 71,2 cm 28 inch 165 - 170 cm 5 ft 5 in - 5 ft 7 in 2,40 shaku 72,7 cm 28,6 inch 170 - 175 cm 5 ft 7 in - 5 ft 9 in 2,45 shaku 74,2 cm 29,2 inch 175 - 180 cm 5 ft 9 in - 5 ft 11 in 2,50 shaku 75,8 cm 29,8 inch 180 - 185 cm 5 ft 11 in - 6 ft 1 in 2,55 shaku 77,3 cm 30,4 inch 185 - 190 cm 6 ft 1 in - 6 ft 3 in 2,60 shaku 78,8 cm 31 inch

€439.00*
Ensure 439 bonus points

Item is in field warehouse, long distance shipping.

Sword Case - Medium (for 3 swords)
Our new Hanwei Sword Cases are designed for the martial artist who carries katana and/or bokken to and from the dojo, but they are equally at home with any sheathed swords less than 127 cm long. They are available in medium (16409 - 2 sword) and large (16408 - 3 sword) sizes. The cases are in a black, heavy-duty fabric with leather reinforcing. A shoulder strap and carrying handle provide traveling convenience. Each case has two zippered inside compartments for swords and an outer compartment for maintenance supplies. These cases are perfect for those who travel frequently with their swords across country or across town. Featuring the new 2025 CAS Hanwei logo on the velcro covered pouch, you can accessorize your sword case with velcro patches from your favorite CAS brands. Visit our promotional page for patches and other items. Key Features: Heavy fabric Maintenance pocket with velcro Shoulder strap Specifications: Overall: 132 cm

€129.00*
Ensure 129 bonus points

Im Außenlager, Langstreckenversand - in 12-14 Tagen bei Dir zu Hause

Scottish Dirk
The Dirk is patterned after an early model (circa 1700) and is similar in form to earlier ballock knives. The blade is "backed" (single-edged and wedge-shaped in cross section). The hilt is hand carved in Macassar ebony. Key Features: Spring steel blade Authentic look and feel Great for re-enactors Measurements: BLADE LENGTH: 13 1/2" OVERALL LENGTH: 20" WEIGHT: 1 lb 3oz THICKNESS: .25

€199.00*
Ensure 199 bonus points

Item is in field warehouse, long distance shipping.

Classic Tiger Katana
The return of a classic .. our Tiger Katana from Hanwei is nostalgic reissue of the original (SH1204) folded steel katana made in the early 2000s. The specifications are painstakingly reproduced for accurancy. The 29 3/4" K120C powder steel blade is differentially tempered with a traditional claying method to the grain patter (hada) showing distinct layers. The temper line (hamon) is evident and prominent. the blade features groove (bo-hi) on both sides. The tsuba is made from blackened iron depicting a "stalking tiger" inlaid in brass. The ray skin (same) is covered on the handle (tsuka) with Japanese Cotton. The saya is deeply lacquered in black and inlaid with brass bamboo leaves. Key Features: 29 3/4" Forged & Folded Steel Blade Traditional Handle Construction Classic Reissue of the orignal Tiger Katana Specifications Overall: 44 1/2" Blade Length: 29 3/4" Handle Length: 13 3/4" Weight: 2 lbs 12 oz Thickness at Guard: .28" Sori: 7/8" Blade Steel: K120C Hrc Edge: 60 Hrc Back: 40 Specs will vary slightly from piece to piece.

€1,599.00*
Ensure 1599 bonus points

Item is in field warehouse, long distance shipping.

Mini Sanko Tsuka Sword
Our Mini Sanko Tsuka sword #3303 is famous in Japanese folk lore, having a possible association with Amaterasu, the Shinto deity Our new line of Mini-Swords features miniature replicas of several of our full-sized swords, all with fully tempered blades and correctly detailed hilts. Each comes with an attractive wood and metal display stand with a metal placard identifying the sword type, origin and approximate period of use. Each piece is furnished in a clam shell presentation box and handsome black and gold sleeve, making an exceptional gift. MEASUREMENTS: Overall length: 7 5/8"

€49.00*
Ensure 49 bonus points

Item is normally available in about 4-6 weeks.

Tsuru Iaito – 71 cm Blade
Our Tsuru Iaito are a breakthrough in design and functionality. Made of a special stainless steel, they are much more durable than aluminum alloy Iaito. Steel has the “feel” of a live blade and is not prone to distort when making a practice cutting stroke. These very affordable practice swords fro Hanwei are the ideal training tools for safely practicing the ancient art of Iaido. Details: Blade length: 71.1 cm Handle length: 26.7 cm Total length: 101 cm Weight: 851 g Thickness: 0.6 cm

€1,190.00*
Ensure 1190 bonus points

Item is normally available in about 4-6 weeks.

Practical Plus XL Katana
The Practical Plus XL Katana provides a cutting sword that is economical while featuring traditional fittings and construction methods. Designed for maximum cutting power in heavy targets, these katana feature genuine same (rayskin) on the tsuka, with a tightly-woven cotton tsuka-ito. The long tang is double-pegged for security. The fittings of the Practical Plus Katanas are decorated in a Japanese Dogwood motif with dragon menuki, and the handsome iron tsuba features a "sunburst" design with a brass habaki. Please note: the katana, wakizashi or tanto’s sageo (cord) on the saya (scabbard) may not be wrapped as pictured. Sageo color may vary. Specifications Overall: 40 1/2” Blade Length: 28 1/2” Handle Length: 11” Weight: 2lb 11oz Point of Balance: 5 1/2" Width at Guard: 1 7/16" Width at Tip: 1 1/8" Thickness at Guard: 1/4" Thickness at Tip: 3/16" Sori: 3/4" Blade Steel: 1566 Hrc Edge: 60 Hrc Back: 40 Specs will vary slightly from piece to piece.

€699.00*
Ensure 699 bonus points

Item is normally available in about 4-6 weeks.

Radaelli Sabre
One of the rapidly growing arts within historical fencing societies is that of sabre fencing in the late 19th century Italian style, originating with fencing masters who were employed to train mounted troops in the effective use of the military sabre. The Milanese fencing master Guiseppe Radaelli, is credited with starting the development of this style, while Salvatore Pecoraro introduced changes and refinements which resulted in the technique finally adopted for sabre at the Military Masters School in Rome. The hilt designs developed by Radaelli and Pecoraro have been reproduced in our fencing sabers, with stainless steel guards and wire-wrapped sharkskin-pattern grips. The high-carbon flex-tempered steel blades closely follow the proportions of the period and are button-tipped for safety. The blade and hilt of the "Hutton" sabre are closer to the style of the true military sabre. The blade is somewhat shortened and lightened, with a rounded tip for effective training. All hilts will accept both blade styles. A replacement blade is available for the Radaelli and Pecoraro. Key Features: * Deuling Sabre * High-Carbon Flex-Tempered Blade * Replacement Blade Available Specifications: Blade length: 33 ¾" Handle length: 5 ¾" Overall length: 40 ¼" Weight: 1lb 7oz For this sabre you can buy a replacement blade item #13681.

€259.00*
Ensure 259 bonus points

Item is in field warehouse, long distance shipping.

back on stock
Bushido Katana
Each piece in the Bushido group has a hand-forged and folded ASSAB-K120C powder steel blade, differentially tempered to produce an HRC60 edge, HRC40 back and a distinctive hamon. Saya are deeply lacquered in old gold with inlaid brass sakura flowers. Quality ray skin is used on the tsuka of the Katana and Wakizashi, while the tsuka of the Tanto is of gold-plated brass with a battle-scene decoration in relief. The tsuba of the Katana and Wakizashi is of blackened and bronzed iron, with detailing in gold and silver and a battle scene decoration. The tsuka-ito on the Katana and Wakizashi and the sageo on all three pieces are woven from Japanese cotton. The fuchi and kashira are of blackened bronze with brass detailing, and the kojira, koiguchi and kurigata are of polished horn. The habaki is brass. The Katana and Wakizashi blades are ungrooved, while the Tanto blade is grooved on both sides. The Katana and Wakizashi have medium length Kissaki. KEY FEATURES: Hand forged and folded steel blade High quality Traditional construction MEASUREMENTS: Blade length: 27 1/4" Handle length: 11 1/2" Overall length: 40" Weight: 2lb 10oz Point of Balance: 5 1/2" Width at Guard: 1.21" Width at Tip: .95" Thickness at Guard: .26" Thickness at Tip: .20" Sori: 3/4" Weight in box: 4lb 8oz Box height: 30" Box width: 5 1/2"

€1,499.00*
Ensure 1499 bonus points

Item is in field warehouse, long distance shipping.

Tea Culture Katana
In Japan the traditional method of serving tea is a celebrated art form in itself. This highly ritualized ceremony is an involved process, the most elaborate of which can last hours and is reserved for the most distinguished of guests. Our Tea Culture Daisho captures the essence of this important tradition. The Katana and Wakizashi are built upon a traditional Shinogi Zukuri style blade with Bo-Hi. The high-carbon blade is hand forged and differentially tempered using the traditional clay method. The Koshirae (furniture) feature the typical elements present in a Japanese tea ceremony. The handle is wrapped with suede leather in a Katate Maki (battle wrap) style. KEY FEATURES: * Forged High-Carbon Blade * Authentically constructed * Battle Wrap Ito MEASUREMENTS: Blade length: 29 Handle length: 12 Overall length: 43 Weight: 2lbs 9.5oz Point of Balance: 5 Width at Guard: 1.86 Width at Tip: 1.24 Thickness at Guard: .32 Thickness at Tip: .25 Sori: 3/4

€1,659.00*
Ensure 1659 bonus points

Item is normally available in about 4-6 weeks.

Han Sword
The Han Sword is a cavalry pattern from the Han Dynasty (206 BC - 220 AD), which reunited China and established boundaries very similar to those existing today. The rosewood grip and scabbard are inlaid with gold in an intricate scroll pattern, while the gilded steel guard, pommel and scabbard decorations feature the "crouching tiger" motif. The random pattern K120C Damascus blade, with its ridged central fuller and reinforced point is admirably suited for slashing cuts and powerful thrusts from horseback. KEY FEATURES: * Authentic replica of Museum Piece * Hand-forged Damascus blade * Silver inlay MEASUREMENTS: BLADE LENGTH: 71.76 cm HANDLE LENGTH: 20.96 cm OVERALL LENGTH: 94.62 cm WEIGHT without Saya: 1030 g WEIGHT with Saya: 1880 g THICKNESS: 5.8 mm

€4,444.00*
Ensure 4444 bonus points

Item is normally available in about 4-6 weeks.

Barbuta Helmet
The Barbuta Helm replicates a 15th century helm that was popular throughout Europe. Bearing a strong resemblance to the helmets of the ancient Corinthians, the Barbuta (or Barbute) was found not only with the facial cutout shape shown in our model but with a T-shaped cutout (no nasal) and with an open-faced rectangular cutout. Designed as a helmet for regular infantry Key features: Beautifully Ornate Authentic Design Measurements: Thickness: 18 gauge Weight: 3lbs 8oz

€229.00*
Ensure 229 bonus points

Item is normally available in about 4-6 weeks.

Orchid Wakizashi
The Orchid Wakizashi from Paul Chen of Hanwei features a blade of folded K120C and striking koshirae. The hamon is prominent and the hada shows distinct layers. High quality ray skin (same) is used on the tsuka, and the tsuka-ito and sageo is woven from premium Japanese cotton. The tsuba is of blackened iron, with an Orchid and Butterfly decoration inlaid in silver, brass and copper. The saya is deeply lacquered in blue with buffalo horn koiguchi and kurikata. The fuchi, kashira and kojiri are crafted in bronzed iron with silver and gold detailing. The habaki is of one-piece brass construction. Specifications Overall: 26 1/4“ Blade Length: 18 3/4“ Handle Length: 6 1/2” Weight: 1lb 4oz Point of Balance: 4" Width at Guard: 1.03" Width at Tip: .67" Thickness at Guard: .22" Thickness at Tip: .17" Sori: 1/2"

€1,499.00*
Ensure 1499 bonus points

Item is normally available in about 4-6 weeks.

Date Masamune Katana
Continuing in the new Generals Series, the artisans at Hanwei pay homage to the One-Eyed Dragon of Oshu, Date Masamune. Known for his signature audacious Crescent Moon kabuto and black and gold armor, his legacy is one of conquest by blood and steel which was contrasted by a reputation of being forward thinking, cultured, diplomatic and sympathetic to foreign causes and Christianity. Our Date Masamune Katana features the classic Hanwei tsuba of him holding a war fan while the blade side features soldiers with firearms. The kashira is embossed with a blackened one-eyed dragon which is contrasted by the kashira with a gold embossed falcon. The tsuka is wrapped in brown suede around a white same (ray skin) which feels incredibly great in the hands. The meticulously detailed gold menuki of Date’s war and kabuto on one side and his breastplate and shoulder armor on the other put this sword over the top. The 27 ¼” forged steel blades possesses a prominent and deep hamon and well balanced for cutting or collecting. A black textured saya prevents smudging or finger prints and is contrasted with a brown cotton sageo and buffalo horn kurikata and kojiri. This katana would fit perfectly in the dojo, home or office with the Date Masamune Kabuto (AH2088) to complete a collection. Made by Hanwei. Key Features: 27 1/4" forged steel blade Brown suede wrapped handle Black textured saya Specifications Overall: 40 5/8" Blade Length: 27 1/4" Handle Length: 12 1/4" Weight: 2 lbs 9 oz Blade Steel: 65mn Hrc Edge: 60 Hrc Back: 40 Specs will vary slightly from piece to piece.

€699.00*
Ensure 699 bonus points

Item is normally available in about 4-6 weeks.

Hand and a Half Tinker Pearce Sharp
This hand and a half sword features a Type XVIIIa blade with a strong central ridge and diamond profile. The tapered oval grip feels fantastic in hand while the second hand easily slides over the wheel pommel when extra leverage is required. This version features a sharp Marquenched spring steel blade. CAS has commissioned Michael `Tinker` Pearce to design a line of swords that will satisfy both the sparring and cutting needs of Western Martial Arts practitioners. Matching sharp and blunt versions of each sword in the series offer the same outstanding handling characteristics in both disciplines. The swords meet Tinker`s exacting quality requirements and are built in much the same way as his custom pieces. Each blade is forged from 5160 spring steel, Marquenched to the desired hardness of 50-53 HRC while the tang is drawn back to the low 30s HRC. For the Medieval models the very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dismantling of the hilt assembly for inspection, to exchange blades if needed, and for anyone wanting to easily customize their grip. Also the sharp and blunt blades are interchangeable on all Medieval models. The grips are cord wrapped and leather covered wood and tapered for a comfortable grip. Each sword is supplied with a leather covered wood scabbard with metal throat and chape. Specifications: Overall length: 42 3/4" Blade length: 33 3/8" Handle length: 9 3/8" Weight: 2 lb 10 oz

€379.00*
Ensure 379 bonus points

Item is in field warehouse, long distance shipping.

Mokko Renshu Katana - w/ Bo-Hi
Hanwei's Renshu Series of samurai swords combines robust 5160 spring steel through-hardened blades with the economical handle fittings of the Practical Series. This combination makes an affordable sword that will hold up well to cutting practice without the fear of harming an expensive sword. Key Features: • 5160 spring steel blade • Through hardened for toughness Specifications Overall: 41 1/2" Blade Length: 28 3/8" Handle Length: 12 1/4" Weight: 2lb 6oz Point of Balance: 5 1/4" Thickness at Guard: 0.26" Thickness at Tip: 0.18" Sori: 7/8" Blade Steel: 5160 Specs will vary slightly from piece to piece.

€479.00*
Ensure 479 bonus points

Item is in field warehouse, long distance shipping.

Maru Renshu Katana - No Hi
Hanwei's Renshu Series of samurai swords combines robust 5160 spring steel through-hardened blades with the economical handle fittings of the Practical Series. This combination makes an affordable sword that will hold up well to cutting practice without the fear of harming an expensive sword. Key Features: • 5160 Spring Steel • Through-hardened for toughness Specifications Overall: 41 3/4" Blade Length: 28 1/4" Handle Length: 12 1/2" Weight: 2lb 5oz Point of Balance: 5 3/4" Thickness at Guard: .27" Thickness at Tip: .16" Sori: 7/8" Blade Steel: 5160 Specs will vary slightly from piece to piece.

€399.01*
Ensure 400 bonus points

Item is normally available in about 4-6 weeks.

Scottish Mortuary Hilt Sword antiqued
Replicated from an original in the collection of the Royal Armouries in England, our Mortuary Hilt Sword is a classic example of a cavalry or dragoon officer´s sword of the 17th century English Civil War period. Deriving its name from the style of sword which memorialized King Charles I, who was executed in 1649, The Mortuary Hilt Sword´s steel basket is decorated with scrolled foliage while an engraved head of Charles I appears on the pommel. The lozenge-section double-edged blade is partially fullered and bears the swordmaker´s mark "1414", the derivation of which has been lost in time. The leather handle wrap terminates in silver wire "Turks Head" knots. The sword, like the original, is beautifully balanced. The sword is available in both polished and antiqued finishes. Both hilts are crafted from stainless steel, to minimize maintenance, that of the normal version is being polished while the "antiqued" version has a museum-quality patina. The high-carbon blade of the normale one is also lightly "antiqued" to promote authenticity. The grips of the mortuary-hilt are covered with leather. The scabbards are leather-covered, black in the case of the normal sword and brown for the antiqued one. This sword comes with a sharp blade. * Beautifully balanced * Leather handle wrap MEASUREMENTS: Blade length: 33" Overall length: 39 1/4" Weight: 2lb 5oz Thickness: .240 The "normal" version of this sword has the item number 3156.

€739.00*
Ensure 739 bonus points

Item is normally available in about 4-6 weeks.

Mini English Mortuary Hilt Sword
The Mini Mortuary sword #3301 closely resembles the sword worn by Oliver Cromwell during the English Civil War. Our new line of Mini-Swords features miniature replicas of several of our full-sized swords, all with fully tempered blades and correctly detailed hilts. Each comes with an attractive wood and metal display stand with a metal placard identifying the sword type, origin and approximate period of use. Each piece is furnished in a clam shell presentation box and handsome black and gold sleeve, making an exceptional gift. MEASUREMENTS: Overall length: 7 5/8"

€49.00*
Ensure 49 bonus points

Item is normally available in about 4-6 weeks.

War Sword
The War Sword is a hand-and-a-half design from the early 14th century. The hardwood grip and elongated scent-stopper pommel make the 32" blade surprisingly easy to handle. High-carbon spring steel. This sword comes with a sharp blade. BLADE LENGTH: 32" OVERALL LENGTH: 41 1/2" WEIGHT: 3lbs 5oz THICKNESS: .19"

€349.00*
Ensure 349 bonus points

Item is normally available in about 4-6 weeks.

Takeda Shingen Kabuto & Mempo
Our Japanese kabuto and mempo are superbly constructed, beautifully detailed and a great value. These models replicate the helms of the great Daimyo Takeda Shingen, Oda Nobunaga and Date Masamune respectively. Some of them are based on a museum piece of unknown provenance, doubles as an exquisite stand for a katana and wakizashi set. All four pieces are equipped with leather inserts allowing them to be worn. Custom designed wooden display stands are included. KEY FEATURES: Authentic styling Wearable Great decorator item MEASUREMENTS: BOX HEIGHT: 51.44 cm BOX WIDTH: 44.45 cm

€659.00*
Ensure 659 bonus points

Item is in field warehouse, long distance shipping.

Orchid Katana
Each piece in the Orchid group has a hand-forged and folded ASSAB-K120C powder steel blade, differentially tempered to produce an HRC60 edge, HRC40 back and a distinctive hamon. Saya are deeply lacquered in blue. High quality ray skin is used on the tsuka, and the tsuka-ito and sageo on all three pieces are woven from Japanese cotton. The tsuba of the Katana & Wakizashi is of blackened iron, with an Orchid and Butterfly decoration inlaid in silver, brass and copper. The koiguchi and kurigata are of buffalo horn, and the fuchi, kashira and kojiri are of bronzed iron with silver and gold detailing. The habaki is of one-piece brass construction. The blades are ungrooved, and the Katana and Wakizashi feature medium-length Kissaki. KEY FEATURES: Hand forged and folded steel blade Excellent quality Traditional construction MEASUREMENTS: Blade length: 28" Handle length: 11 1/2" Overall length: 40 1/2" Weight: 2lb 3oz Point of Balance: 6" Width at Guard: 1.17" Width at Tip: .82" Thickness at Guard: .24" Thickness at Tip: .17" Sori: 3/4" Weight in box: 6lb Box height: 48" Box width: 5 3/4"

€1,499.00*
Ensure 1499 bonus points

Item is normally available in about 4-6 weeks.

Gustav Main Gauche
This "antiqued" Gustav Main Gauche is the trusty companion to our Antiniqued Gustav Rapier and features a hilt finish, developed by Hanwei, that allows a museum-quality patina to be applied to stainless steel while the non-corroding properties of the steel are retained. This finish is very attractive and gives an authentic appearance to the piece. Specifications Overall: 17” Blade Length: 11 1/8” Handle Length: 5 1/2" Weight: 12oz Width at Guard: 21mm Width at Tip: 2.4mm Thickness at Guard: 5mm Thickness at Tip: 2mm Blade Steel: 1566

€289.00*
Ensure 289 bonus points

Dieser Artikel hat eine Lieferfrist von ca. 4-6 Wochen.

Practical Rapier Blade
This practical sparring blade is suitable for the Solingen, Torino and Gustav Rapiers. It features a rubber tip and is blunted for sparring. Details: Total length: 44 1/2" Blade length: 37" This replacement blade fits item #13129, #13170, #13171, #13172, #13274, #13276 und #13279.

€104.90*
Ensure 105 bonus points

Item is in field warehouse, long distance shipping.

Practical XL Katana
Our Practical Katanas have always been at the forefront of providing economical yet functional swords to the martial arts community. Designed for maximum cutting power in heavy targets, these latest Practical XLs katanas combine the blade geometries and profiles of the Performance Series with the affordability of our Practical fittings. The blades in the cutting styles are forged from 1566 steel and differentially hardened in the traditional manner, producing an edge hardness of HRC60 and spine hardness of HRC40. The removeable handle is tightly wrapped in the tradtional style with imitation leather to provide a positive grip that will withstand years of tameshigiri practice. Please note: the katana, wakizashi or tanto’s sageo (cord) on the saya (scabbard) may not be wrapped as pictured. Sageo color may vary. Specifications Overall: 40 7/8” Blade Length: 28 1/8” Handle Length: 11 3/8" Weight: 2lb 15oz Point of Balance: 5" Width at Guard: 1.43" Width at Tip: 1.08" Thickness at Guard: .26" Thickness at Tip: .15" Sori: 3/4" Blade Steel: 1566 Hrc Edge: 60 Hrc Back: 40 Specs will vary slightly from piece to piece.

€519.00*
Ensure 519 bonus points

Item is normally available in about 4-6 weeks.

Fechtrapier, Schlaegerklinge
Fencing in the Renaissance style is rapidly growing in popularity, combining the quickness of light blades with the structure and spirit of the duel. This version of the Fencing Rapier carries the double-wide Epee (Musketeer) blade, which is an extremely quick button-tipped blade based on sport fencings "epee" style. KEY FEATURES: * Musketeer double-wide epee blade * Designed for the Renaissance fencer * Very quick MEASUREMENTS: BLADE LENGTH: 33 7/8" HANDLE LENGTH: 5" OVERALL LENGTH: 41" WEIGHT: 1lb 7oz For this rapier you can buy a replacement blade item #13677 and #13678.

€599.00*
Ensure 599 bonus points

Item is normally available in about 4-6 weeks.

Taza Main Gauche
The Taza Main Gauche features a pierced guard and pommel in the same design as the Taza rapier, with a fileworked blade in the Spanish style. A leather scabbard and belt frog are included. Specifications: Overall: 18 1/4" Blade Length: 12 1/4“ Handle Length: 5 1/5" Weight: 1lb Width at Guard: 29mm Width at Tip: 2mm Thickness at Guard: 6mm Thickness at Tip: 2mm Blade Steel: 1566

€339.00*
Ensure 339 bonus points

Dieser Artikel hat eine Lieferfrist von ca. 4-6 Wochen.

Rock Creek Skinner with a Trailing Point Style Blade
Forged from a high-alloy steel (HWS-1K) proprietary to Hanwei, with an edge hardness of 58-60HRc and excellent corrosion resistance, edge-holding and ease of sharpening. The blade thickness is 4,7 mm, and the blade is flat ground. An aggressive thumb grip is provided on the back of the blade and a finger groove is provided at the choil for blade control. The through- tangs are very substantial, terminating in a short thread at the butt. The guard and pommel are investment cast in stainless steel. Sheath is made in bark-tanned leather with stainless steel reinforcing at the wear points and has a strap-and-snap retainer. Details: Overall: 22.22cm Blade Length: 10.14cm Weight: 182g

€99.00*
Ensure 99 bonus points

Item is in field warehouse, long distance shipping.

Practical Pro Katana
Due to demand, the Practical Pro Katana has an extended tsuka and a thicker and longer blade. The blades are constructed from handforged, 1566 steel and are differentially tempered using a traditional claying method. The Practical Pro has a fine polish to it compared to others in the series. The tsuka is wrapped with synthetic black leather for its gripping characteristics and is double-pegged for safety. The saya is done in a deep black lacquer with a black Japanese cotton sageo. The fittings (koshirae) are done in antiqued black iron. The katana is stylized with a round Kuruma tsuba, which represents the "Wheel of Dharma," symbolizing the Buddhist concept of the Noble Eightfold Path. For those interested in an economical katana that can stand the rigors of heavy cutting (tameshigiri), the Practical Pro is an excellent choice. KEY FEATURES: Antiqued Fittings Hand-Forged 1566 Steel Blade Deep Black Lacquered Saya MEASUREMENTS: BLADE LENGTH: 74.93 cm HANDLE LENGTH: 38.1 cm OVERALL LENGTH: 116.21 cm Weight with Saya: 1600 g Weight without Saya: 1300 g

€619.00*
Ensure 619 bonus points

Item is in field warehouse, long distance shipping.

Civilian Shashka
Here is an excellent replica of a traditional shaska you would find among the common folk of Caucasus Mountain in the 1700s. Simple, powerful and graceful in the hand for a horseman's sabre. The smooth wood handle unites your grip to the sword in to one. A brown leather lanyard compliments the design as well as allow extra security while on horseback. The black leather wrapped scabbard features stainless steel accoutrements. Specifications Overall: 36 3/4" Blade Length: 29 3/8" Handle Length: 6 5/8" Weight: 1 lbs 11 oz Sori: 3/4" Specs will vary slightly from piece to piece.

€488.99*
Ensure 489 bonus points

Item is normally available in about 4-6 weeks.

Court Sword Fencing
Our Court and Washington Fencing swords are built to withstand the rigors of stage or fencing combat while maintaining historical accuracy in their highly decorated hilts. The Court Sword features a wire wrapped grip with intricate carving detail in the guard and pommel. The ribbed leather handle ends in well executed turks head knots on the Washington Sword for an excellent grip on this handsome sword. Specifications: Blade length: 34 ½" Handle length: 4" Overall length: 44" Weight: 1lb 15oz Category 2: These swords are likewise suitable for beginners and advanced fighters. All category 2 swords feature high-quality carbon steel blades which hardly show any scratches when used against other blades. The pommels are riveted at the end of the tang.

€759.00*
Ensure 759 bonus points

Item is normally available in about 4-6 weeks.

Banshee
Bred in the jungles of Asia, our Banshee sword has its origins in the Thai "Krabi" and its close cousin, the Burmese "Dah." Extremely strong and very quick, the Banshee is a cutting sword first and last, with a slightly weight-forward balance for slashing through jungle growth with ease. The high-carbon blade is heat treated for optimum shock absorption and edge retention, and the spiral-wrapped black leather grip provides excellent handling qualities. The sword comes equipped with a high-retention locking mechanism for safety. The wooden scabbard is finished in matte black, with side rings designed to allow a number of carrying options. A leather shoulder strap is included. KEY FEATURES: * High-carbon steel blade * Leather handle wrap * Excellent balance MEASUREMENTS: BLADE LENGTH: 21" HANDLE LENGTH: 11 1/2" OVERALL LENGTH: 32 1/2" WEIGHT: 1lb 10oz THICKNESS: .260

€349.00*
Ensure 349 bonus points

Item is in field warehouse, long distance shipping.

Tinker Replacement Retention Nut
This retention nut is designed to replace any of the recessed pommel nuts used on the Hanwei / Tinker sharp or blunt training swords. In addition it can be used on the replacement blades for those looking for a good starting blade to build a custom sword. The nuts are threaded M6 x 1 and will fit any of the blades in the Hanwei/Tinker line. This listing is a for a single pommel retention nut. Key Features: Made by Hanwei Fits all Hanwei / Tinker Dismountable Swords Threaded M6 x 1.0

€7.90*
Ensure 8 bonus points

Item is in field warehouse, long distance shipping.

Toyotomi Hideyoshi Katana
Toyotomi Hideyoshi, born Hiyoshimaru in 1536, rose from peasant status to chief minister of the emperor in 1585 in attempt to complete the goal of unification of Japan by his fallen leader Oda Nobunaga. In 1568 when Nobunaga began his siege of central Japan Hideyoshi fought in many of those important battles. His judicious behavior, positive countenance and intelligence helped him rise through the ranks. Though his lowly origins bely the latter of those traits, Hideyoshi was the architect of many reforms of feudalism in Japan as well as becoming a master of the tea ceremony and educated himself in secret. In 1577 Nobunaga charged Hideyoshi with the subjugation of western Japan. After the betrayal of Nobunaga's retainer, Akechi Mitsuhide, and Nobunaga's suicide, Hideyoshi sought immediate revenge on his leader’s traitor and defeated him at the Battle of Yamazaki.Hideyoshi followed by securing the line of succession by Nobunaga's grandson. After subduing one the powerful vassals supporting Nobunaga's third son, Hideyoshi began fortifying the country by securing all the strongholds and building Osaka castle. Soon after he started the unification process of Japan to complete his mentor's work. After battling Tokugawa Ieyasu which led to a draw, they ended their conflict with an alliance. In 1585 Hideyoshi was appointed kampuku (chancellor to the emperor) and was given the family name of Toyotomi. After subduing the last of the resistance with his new ally, Ieyasu, they went about securing power and stability for Japan by disarming the population, reducing the number of castles and strongholds within the country and freezing the social classes. Hideyoshi abolished road checkpoints to encourage travel and trade. He also conducted large land surveys to develop mineral resources for the formation of coinage to also assist with economic growth.In 1590, Hideyoshi was the head of daimyo alliance the formed the government of national unification. Soon after Hideyoshi passed on his position of kampuku to his nephew, Toyotomi Hidetsugu. In 1592 Hideyoshi began an invasion of Korea which ended in failure but tried again in 1597 and failed. Hideyoshi died in 1601 at the age of 62 where he spent his latter years burdened by his defeat in Korea. Two years after Toyotomi Hideyoshi's death, Ieyasu took control of the government and founded the Tokugawa shogunate. Ieyasu continued Hideyoshi's policies of unification which led into a time of peace in the Tokugawa era.Hanwei has created a genuine piece of sword art with the Toyotomi Hideyoshi Katana. The tsuba depicts the image of Hideyoshi embossed with gold detailing and an etching of Osaka castle on the opposite side. The fuchi illustrates the tea ceremony with gold detailing and as well as kashira with its depiction of Osaka castle. The handle is wrapped in black cotton over white same. The 27” forged blade features a hi on both sides to make this a light and quick katana. The deep black lacquered saya completes the piece. The Toyotomi Hideyoshi Katana represents the best of Hanwei craftsmanship and sword art which will satisfy the practitioner and the collector alike. Details: Total length: 102.23 cm Blade length: 68.58 cm Handle Length: 12" Weight: 1.05kg Width at the tip: 4.3 mm Blade steel: T10 Hrc cutting edge: 60 Hrc back: 40

€1,199.00*
Ensure 1199 bonus points

Item is in field warehouse, long distance shipping.

Comanche
The top-quality full-tang hunter features a forged blade in HWS-1K with full taper tang. Edge hardness is 58-60HRc. The handle scales are genuine Sambar stag and the stainless steel guard features electroformed scroll engraving. Sheath construction is bark-tanned leather with stainless steel reinforcing at the wear points. Made by Hanwei. Details: Length: 28.6 cm Blade length: 15.9 cm Weight: 311 g Blade steel: HWS-1K Specs will vary slightly from piece to piece.

€149.00*
Ensure 149 bonus points

Item is in field warehouse, long distance shipping.

Qi Jian
From the master swordsmiths of the Hanwei forge comes the Qi Jian, a re-creation of an ancient design that utilized one-piece forging. The entire sword, from pommel to tip, has been forged from a single billet of steel. This forging technique provides unparalleled strength and balance while exhibiting a clear, bell-like tone when lightly struck. The sword´s name originates with the Qi nation, one of the many warring states that eventually formed modern China. Legend has it that Feng-Xuan, one of the Qi people and a central character in a well known folk tale, possessed such a one piece sword and would use its ringing quality to accompany his singing. The sword´s grip is rayskin wrapped, a feature matched by the wrap on the throat of the scabbard, making for a stunningly beautiful presentation. KEY FEATURES: * One-Piece Forged Construction * Rayskin Handle Wrap * Superb Balance and Strength MEASUREMENTS: Blade length: 28 ½" Handle length: 7 ¾" Overall length: 37 ¾" Weight: 2lb 8oz Point of Balance: 1 1/2" Point of Percussion: 18 1/2" Width at Guard: 1.13" Width at Tip: .61" Thickness at Guard: .28"

€2,299.00*
Ensure 2299 bonus points

Item is normally available in about 4-6 weeks.

Bamboo Mat Wakizashi
The Bamboo Mat Wakizashi features a chu-kissaki blade of Hanwei's own high-alloy HWS-2S steel, which combines impressive performance with a striking O-choji hamon. This steel is made in Hanwei's new factory, with high-tech equipment, producing a very pure, advanced-metallurgy blade with excellent edge-holding capability and resilience. The fittings feature a bamboo-themed black iron tsuba, textured in a bamboo mat design with a jointed bamboo rim and highlighted with gold-tipped bamboo leaves. The fuchi/kashira follow the same theme and the golden menuki feature a pair of sparrows. The saya is finished in high-gloss lacquer with horn fittings. Made by Hanwei. Details: Length: 65 cm Blade length: 47.6 cm Weight: 680 g Blade steel: HWS-2S Specs will vary slightly from piece to piece.

€1,099.00*
Ensure 1099 bonus points

Item is in field warehouse, long distance shipping.

Cawood
The celebrated Cawood Sword, named after its discovery location near Cawood Castle in England, is regarded as one of the finest and best-preserved examples of an 11th century Viking sword in existence. Preserved in the mud of the bed of the River Ouse for almost a millennium, the sword has now found a permanent home in the Yorkshire Museum, where it is a leading attraction. What is almost certainly a “sister” sword was unearthed in Norway in 1888, giving a valuable clue to the Cawood Sword’s origin. Hanwei’s version of the sword replicates the lobated pommel and steeply down curved quillons of the hilt perfectly, while the wide-fullered blade is reproduced in 5160 high-carbon steel. The weight and balance provide for a very usable sword. No details of the original scabbard are known, but the styling of Hanwei’s leather-covered version is typical of the period. Made by Hanwei. Details: Length: 91.4 cm Blade length: 76.2 cm Weight: 1.1 kg Blade steel: 5160 Carbon steel Specs will vary slightly from piece to piece.

€529.00*
Ensure 529 bonus points

Item is normally available in about 4-6 weeks.

Dadao
Long the traditional weapon of China´s peasant armies, the Dadao, or big sword, was used with deadly effect as late as the 1930´s in the Sino-Japanese War. Its single- or two-handed versatility, combined with the tremendous slashing power of its weight-forward blade made it the ideal close-quarters weapon. Although the originals had no scabbard, a simple carrying case is provided for protection and ease of transportation. KEY FEATURES: * Authentic styling * Powerful cutting capability * Scabbard included MEASUREMENTS: BLADE LENGTH: 56.52 cm HANDLE LENGTH: 36.20 cm OVERALL LENGTH: 95.25 cm WEIGHT: 1048.95 g THICKNESS: 4.8 mm

€239.00*
Ensure 239 bonus points

Item is in field warehouse, long distance shipping.

Crane Tsuba Pendant
These tsuba pendant necklaces from CAS Hanwei are crafted in sterling silver and represent iconic tsuba designs from our line of Japanese Katana. The one non-tsuba style may be recognized as the dragon from the CAS Hanwei logo! The braided neck bands feature a unique sliding closure that allows for a full range of length adjustment. Each piece is packaged in an upscale clam shell jewelry box creating an exceptional gift for the martial artist or sword collector. Key Features: o Sterling Silver o Braided Necklace o Great Gift! Specifications: Diameter: 4 cm

€35.00*
Ensure 35 bonus points

Item is in field warehouse, long distance shipping.

Pecos
This new Rock Creek lockback folder is solidly built on stainless steel frames and features unique stabilized leather handle scales. The blade is precision ground in Hanwei’s HWS-2K steel, which has excellent anti-corrosion and edge-holding capabilities. Blade hardness is 58HRc. The handle scales are checkered and a thumb stud provides easy one-hand opening. The Pecos features a sturdy removable pocket clip. Made by Hanwei. Details: Length: 10.5 cm (closed), 27.3 cm (open) Blade length: 19 cm Weight: 85 g Blade steel: HWS-2K Specs will vary slightly from piece to piece.

€39.00*
Ensure 39 bonus points

Item is normally available in about 4-6 weeks.

Modern Practice Fencing Epee
Used for practice sessions by fencers worldwide, these sport fencing weapons are ideal for the recreational fencer. Featuring blades of tempered high-carbon steel, forged under strict quality control standards, the weapons are built for three fencing disciplines, foil, epee and saber. Handles are molded rubber, with aluminum guards and plated steel pommels, weighted for exact balance. Spare blades for all three models are available. Key Features: Built to International Standards Tempered High-Carbon Steel Blade Molded Rubber Handle Specifications: Overall length: 42 3/8 Weight: 1lb

€109.01*
Ensure 110 bonus points

Item is in field warehouse, long distance shipping.

practical Scramasax
The Practical Scramasax has been produced in response to many requests from Viking re-enactors. Its 12 ½" blade, with a rounded tip and 1/16" wide edge, make it an ideal secondary weapon. A horizontal-carry scabbard is provided. Key Features * Made for the re-enactor * Authentic look and feel * Complies with safety requirements Measurements BLADE LENGTH: 12 1/2" OVERALL LENGTH: 17 3/4" WEIGHT: 1lb 7oz Category 2: These daggers are likewise suitable for beginners and advanced fighters. All category 2 daggers feature high-quality carbon steel blades which hardly show any scratches when used against other blades. The pommels are riveted at the end of the tang.

€299.00*
Ensure 299 bonus points

Item is in field warehouse, long distance shipping.

Practical Tai Chi Sword, 78.4 cm
T'ai Chi Ch'üan, Taijiquan, Tai Chi Chuan, or commonly Tai Chi or Taiji, is a Nei chia ("internal") Chinese martial art which is known for the claims of health and longevity benefits made by its practitioners and in some recent medical studies. T'ai Chi Ch'uan is also known as a "soft style" martial art. T'ai Chi forms are best known as the slow motion routines groups of people practice every morning in hundreds of parks across China and, increasingly, other parts of the world. In T'ai Chi classes one is taught awareness of one's own balance and what affects it, awareness of the same in of others, and appreciation of the practical value in one's ability to moderate extremes of behavior and attitude at both mental and physical levels. This blade was made from high carbon steel ! Details: Blade length: 78.4 cm Handle length: 16.51 cm Overall length: 97.79 cm Weight: 595 g / Point of Balance: 10.16 cm Width at Guard: 2.77 cm Width at Tip: 1.9 cm Thickness at Guard: 0.53 cm Thickness at Tip: 0.28 cm

€249.90*
Ensure 250 bonus points

Item is in field warehouse, long distance shipping.

Bamboo Tsuba Pendant
These tsuba pendant necklaces from CAS Hanwei are crafted in sterling silver and represent iconic tsuba designs from our line of Japanese Katana. The one non-tsuba style may be recognized as the dragon from the CAS Hanwei logo! The braided neck bands feature a unique sliding closure that allows for a full range of length adjustment. Each piece is packaged in an upscale clam shell jewelry box creating an exceptional gift for the martial artist or sword collector. Key Features: o Sterling Silver o Braided Necklace o Great Gift! Specifications: Diameter: 4 cm

€35.00*
Ensure 35 bonus points

Item is normally available in about 4-6 weeks.

Lionheart Sword
The single-hand Lionheart Sword is typical of the cruciform-hilt style of the crusading knights of Europe in the 12th and 13th centuries. The wheel pommel and macassar ebony grip balance the carbon steel blade perfectly. This sword comes with a sharp blade. BLADE LENGTH: 27 1/4" OVERALL LENGTH: 35 1/2" WEIGHT: 2lbs 11oz THICKNESS: .16"

€349.00*
Ensure 349 bonus points

Item is in field warehouse, long distance shipping.

Tsunami Wakizashi
Each piece in the Tsunami Series is stylized with the renowned Tomoe motif. The tsuba, fuchi, & kashira are made of black iron and marked with the Tomoe crest (mon). The blades are hand-forged from T10 high-carbon steel and are differentially tempered using traditional claying methods. The temper line (hamon) is evident and prominent. Each piece has a deeply lacquered black saya with a one-piece brass habaki construction. Real ray skin (same) is used on the tsuka, and the tsuka-ito and sageo are made of premium woven Japanese black cotton. The katana and wakizashi are constructed with a large o-kissaki and are ideal for cutting exercises (tameshigiri). The handle on the tanto is an attractive ribbed buffalo horn. KEY FEATURES: * High-carbon steel * Deeply lacquered black saya * Ideal for cutting exercises MEASUREMENTS: HANDLE LENGTH: 16.51 cm BLADE LENGTH: 47 cm OVERALL LENGTH: 67.31 cm WEIGHT: 765.45 g THICKNESS: 0.74 cm

€1,159.00*
Ensure 1159 bonus points

Item is in field warehouse, long distance shipping.

Katana Case
The Hanwei Sword Case is designed for the martial artist who carries katana and/or bokken to and from the dojo, but they are equally at home with any sheathed swords less than 127 cm long. The case is in a black, heavy-duty fabric with leather reinforcing. A shoulder strap and carrying handle provide traveling convenience. Each case has two zippered inside compartments for swords and an outer compartment for maintenance supplies. This case is perfect for those who travel frequently with their swords across country or across town. Details: Overall length: approx. 132.8 cm

€109.00*
Ensure 109 bonus points

Item is in field warehouse, long distance shipping.

Rhinelander
The Rhinelander Bastard sword, typical of late 15th century central European cut-and-thrust swords, is a handsome piece that will be appreciated by both collectors and cutting enthusiasts. The ring-guard hilt and scent-stopper pommel balance a riveted-tang fullered blade, forged in 5160 high-carbon steel and hardened to 54HRc for an optimal combination of edge-holding and resilience. A leather-wrapped scabbard is included. Made by Hanwei Details: Length: 114.9 cm Blade length: 90.8 cm Weight: 1.44 kg Blade steel: 5160 Carbon steel Specs will vary slightly from piece to piece.

€409.00*
Ensure 409 bonus points

Item is normally available in about 4-6 weeks.

Zatoichi Shirasaya Katana, Black
This sword is one of three exciting versions offered by Hanwei of the sword of Zatoichi, the legendary blind Samurai. The ever-popular black sword (#11913), with its fully tempered carbon steel blade is joined by the sword #11912 which features a fully-forged straight Katana blade, housed in a natural hardwood scabbard and handle combination, while the superbly folded blade of the Zatoichi sword (#11914) is housed in exquisite rosewood. Key Features: Carbon steel with etched temper line blade Slim profile Supplied with fabric sword bag. Specifications: Overall: 100.33 cm Blade Length: 72.39 cm Handle Length: 26.67 cm Weight: 0.68 kg Point of Balance: 20.32 cm Blade Steel: 5140 Specs will vary slightly from piece to piece.

€289.00*
Ensure 289 bonus points

Item is in field warehouse, long distance shipping.

Dark Sentinel
Combining the slashing power of the Samurai Katana with the agility and thrusting ability of fine European dueling swords, the Dark Sentinel is a handsome sword with a bite. Light and quick enough for single-hand fencing but with the ability to turn on awesome two-handed power, the Dark Sentinel will guard the castle gates against all would-be usurpers - without draining the Royal treasury! KEY FEATURES: Forged high-carbon steel blade Studded leather-wrapped grip Fully functional MEASUREMENTS: BLADE LENGTH: 32" HANDLE LENGTH: 10 1/2" OVERALL LENGTH: 42 1/2" Weight with Saya: 1300 g Weight without Saya: 1000 g

€229.00*
Ensure 229 bonus points

Item is normally available in about 4-6 weeks.

Tori XL Katana
The Tori XL Katana is an all-new design from CAS/Hanwei that incorporates truly elegant furniture with the functionality of our performance series. Featuring a flying crane tsuba, brown leather tsuka-ito over black same and a dark brown/black saya, the Tori is available in three folded steel cutting blade profiles and three Iaito blade lengths. This is undoubtedly one of the most elegant mounts ever crafted by CAS/Hanwei. XL Heavy Competitive Cutting : Designed strictly for competitive cutting, our XL Katana blades incorporate the geometry, strength, weight and profile needed for successful cuts on substantial targets. Featuring differential heat treatment and a narrow edge angle, these wide blades will reward good technique with clean cuts and excellent durability. KEY FEATURES: Folded Steel Blade Premium fittings Built for Martial Artists MEASUREMENTS: Blade length: 28 ½" Handle length: 11" Overall length: 40 ½" Weight: 2lb 11oz Point of Balance: 5" Width at Guard: 1.44" Width at Tip: 1.12" Thickness at Guard: .24" Thickness at Tip: .13" Sori: 3/4"

€1,699.00*
Ensure 1699 bonus points

Item is normally available in about 4-6 weeks.

Lefthand Dagger
The Main Gauche, or left hand dagger, was often used with the rapier, providing an added dimension in both offense and defense, and the "Schools of Fence" which proliferated in Europe during this period taught the use of the two weapons in combination. The Main Gauche would often match the Rapier in styling, while incorporating features which maximized the effectiveness of the piece. This dagger comes with a sharp blade. * Historic styling * Perfect balance MEASUREMENTS: BLADE LENGTH: 11" OVERALL LENGTH: 16 5/8" WEIGHT: 9oz

€219.00*
Ensure 219 bonus points

Item is in field warehouse, long distance shipping.

Molle Attachment for Tactical Series
Designed specifically for our Tactical Katana, Tactical Wakizashi, and Tactical Tanto our MOLLE attachment provides a secure vertical carry option. Details: Black Nylon MOLLE Fits all three Tactical Swords

€11.90*
Ensure 12 bonus points

Item is normally available in about 4-6 weeks.

Roundel Dagger
Introduced in response to many requests, Hanwei’s Roundel Dagger is typical of the widely-used sidearm of the late middle ages. Carried by a wide section of the populace, from tradesmen to fully-armoured knights, the Roundel enjoyed a long service life. This version is both attractive and functional. The stiff T-section blade is edged and crafted in 5160 high-carbon steel, with a hardwood handle. All fittings, including the octagonal guard and pommel, are in steel and the leather-covered wooden sheath complements the dagger perfectly. The Roundel will appeal to collectors and living history participants alike. Made by Hanwei. Details: Length: 34.3 cm Blade length: 22.9 cm Weight: 283 g Blade steel: 5160 Carbon steel Specs will vary slightly from piece to piece.

€219.00*
Ensure 219 bonus points

Item is normally available in about 4-6 weeks.

Yasukuni Captains Gunto
This sword replicates the Gunto of a high-ranking Japanese army officer of the Pre-WWII and WWII era. These swords were made from 1933 onwards by a group of highly-skilled sword smiths at the Yasukuni Shrine in Tokyo and are known collectively as the Yasukuni swords. Only 8000 of these swords were made and many were destroyed, so in recent years they have become highly collectable. Hanwei is producing these very accurate replicas for collectors unable to afford or obtain originals. The sword features a forged blade of high carbon 1095 steel. Hand-woven pure silk Sageo with accurate Captain-rank coloration. Details: Weight: approx. 1192 g Overall Length: approx. 95 cm Blade Length: approx. 71.5 cm Handle Length: approx. 23.5 cm Blade Material: 1095

€2,099.00*
Ensure 2099 bonus points

Item is normally available in about 4-6 weeks.

Kaeru (Frog) Wakizashi
The blade of the Kaeru wakizashi is hand-forged and folded from powder steel, with a medium-length (chu) kissaki. The saya is deeply lacquered in black. High quality ray skin (same) is used on the tsuka. The tsuka-ito is made of premium dark blue Japanese cotton. The tsuba is crafted in blackened iron, with detailing in gold and silver and a frog on lily pad scene decoration. The silk sageo compliments the theme of the Frog and is elegently woven in dark blue and moss green. The fuchi and kashira are of black with brass detailing, and the kojiri, koiguchi and kurikata are of polished buffalo horn. The habaki is a one-piece brass construction. Key Features: • Hand forged and folded steel blade • Silk sageo • Traditional Construction Specifications Overall: 27.75" Blade Length: 19.75" Handle Length: 6" Weight: 1lb 7oz Blade Steel: K120C Specs will vary slightly from piece to piece.

€1,169.00*
Ensure 1169 bonus points

Item is in field warehouse, long distance shipping.

Practice Sabre
Used for practice sessions by fencers worldwide, the Sport Fencing Sabre is ideal for the recreational fencer. Featuring a blade of tempered high-carbon steel, forged under strict quality control standards, the sabre is built to international standards. Handles are molded rubber, with aluminum guards and steel pommels, weighted for exact balance. A spare blade is also available. Specifications: Overall length: 40 3/4" Weight: 8oz

€109.01*
Ensure 110 bonus points

Item is normally available in about 4-6 weeks.

Arrowhead Display Box - Small
Our individual traditional wooden display boxes will provide both display and storage capability for these and any other arrowheads in a collection. Available in two sizes, to accommodate both the large (10" and over) and the small (under 10") arrowheads, the boxes are provided with a cushioned insert and retaining ties to center the piece in the display. Key features: o Wooden Construction o Leather Lining o Hanwei quality Specifications: Overall length: 11 ½ "

€12.90*
Ensure 13 bonus points

Item is normally available in about 4-6 weeks.

Wind and Thunder Wakizashi
The Katana of the Wind and Thunder set is designed specifically for the martial artist who needs a sword to meet the demands of heavy target cutting. The Katana features a heavier and thicker blade with traditional furniture and fittings. The set features black iron Raiden tsuba and Tomoe motif fuchi and kashira. The tsuka are wrapped in genuine same (ray skin) and the tsuka-ito is premium Japanese black cotton. The saya is finished in a traditional black laquer with a black cotton sageo. The Katana is an excellent choice for batto-jutsu practitioners. See models #1263 and #1270 for the Katana and Tanto. Specifications: Blade length: 19 3/4" Handle length: 6 1/2" Overall length: 26 1/2" Weight: 1.85 lb Point of Balance: 3 1/2" Width at Guard: 1.14" Width at Tip: .98" Thickness at Guard: .30" Thickness at Tip: .25" Sori: 1/2"

€819.00*
Ensure 819 bonus points

Item is normally available in about 4-6 weeks.

Dragonfly Katana - 29" blade
Our new Dragonfly Katana possesses all the attributes that make a katana. An original distinctive style, with a thinner and lighter blade that is individually hand forged and folded. Our Dragonfly Katana features the blending of T-10 and 1055 steel. This new folded steel combination presents striking contrast between the layers and when polished reveals a highly visible hada. The Dragonfly held a special significance to the Samurai. Their seemingly tireless movement reflected the Samurai’s desire to give tireless service to his feudal Lord. The fittings are beautifully antiqued duplicating the look of old iron. The tsuba design is made in iron with a copper inlaid dragonfly, which contrasts beautifully against the weathered looking iron. The authenticity and craftsmanship behind these fittings. The dark brown silk ito is set off by the black same making this a unique offering. The lower shinogi and the scant hira-niku make this blade lighter and faster, and gives it less resistance when cutting soft targets. The tsuka has the slight “waisting”, ryugo, that is popular with many who study Japanese sword arts. Three blade lengths are available: 12151 Dragonfly Katana - 76.2 cm blade length 12152 Dragonfly Katana - 73.66 cm blade length 12153 Dragonfly Katana - 71.12 cm blade length Order your preference while supplies last. Specifications Overall: 43 3/4" Blade Length: 29" Handle Length: 13" Weight: 2 lbs 9 oz Thickness at Guard: 6.8mm Thickness at Tip: 2.5mm Sori: 3/4" Blade Steel: T10 & 1055 Hrc Edge: 60 Hrc Back: 40 Specs will vary slightly from piece to piece.

€2,999.00*
Ensure 2999 bonus points

Item is in field warehouse, long distance shipping.