The Battle ready weapons are designed for sports use. Therefore, the blades are always blunt and rounded.

Battle Ready Weapons

Practical Bastard Sword

By customer request CAS` have produced a re-enactment version of our the Original Bastard sword. The blade is forged in 5160 high-carbon steel, to minimize burring, and the transverse thickness of the guard has been increased, both to provide adequate strength for re-enactment use and to present a safer profile at the ends of the guard. Another innovation is the provision of an all-leather scabbard, in contrast with the rigid scabbards normally provided with the Practical swords - this is designed both to provide an extra margin of safety when combatants fall on the scabbard in battle and also to minimize the need for replacement scabbards. The sword is supplied with the grip and scabbard in a neutral-coloured leather to allow customization to the owners taste. Special features: - 5160 Steel - Dyeable Leather Handle and scabbard - Built for re-enactors Made by Hanwei. Details: Weight: approx. 1646 g Overall Length: approx. 126 cm Blade Length: approx. 97 cm Blade Material: 5160 Steel Handle Material: Dyeable Leather Handle Handle Length: approx. 28 cm Centre of Gravity: ca 9,5 cm infront of guard Category 2: These swords are likewise suitable for beginners and advanced fighters. All category 2 swords feature high-quality carbon steel blades which hardly show any scratches when used against other blades. The pommels are riveted at the end of the tang.

€429.00*

Ensure 429 bonus points

this item is in stock
delivery before Christmas!

Cavarly Sword

This cavarly sword has a pommel and guard made of steel. The long handle and the excellent balance make this sword very fast and dangerous. The forged high carbon blade features a hardness of 48-52 HRC, has no sharp edges and is fully battle ready. Details: Weight: 1.38 kg Blade length: 82 cm Handle length: 12.5 cm Overall length: 101 cm Category 3: These swords are top-quality battle ready swords. They are likewise suitable for beginners and advanced fighters looking for a sword with a good price-performance ratio and great durability. All category 3 swords feature high-quality carbon steel blades which are tough and flexible at the same time. When used against other blades they show hardly any scratches. The pommels are riveted at the end of the wide tangs.

€299.00*

Ensure 299 bonus points

this item is in stock
delivery before Christmas!

Broad Sword

This broad sword has a pommel and guard made of steel. The long handle and the excellent balance make this sword very fast and dangerous. The forged high carbon blade features a hardness of 48-52 HRC, has no sharp edges and is fully battle ready. Details: Weight: 1.52 kg Blade length: 70.5 cm Handle length: 12.5 cm Total length: 90 cm Category 3: These swords are top-quality battle ready swords. They are likewise suitable for beginners and advanced fighters looking for a sword with a good price-performance ratio and great durability. All category 3 swords feature high-quality carbon steel blades which are tough and flexible at the same time. When used against other blades they show hardly any scratches. The pommels are riveted at the end of the wide tangs.

€229.00*

Ensure 229 bonus points

this item is in stock
delivery before Christmas!

Battle sword

This sword has a full tang construction, the handforged blade is double screwed at the end and made of carbon steel. Details: Blade length: 86 cm Total length: 109 cm Handle length: 16 cm Width of the guard: 20 cm Total weight: 1750 g Category 1: These swords are suitable for beginners who want to buy their first battle ready sword or need a sword for training purposes. All category 1 swords feature simple high carbon steel blades which will sustain scratches and nicks when used against tougher blades. The pommels are screwed or simply riveted at the end of the tang.

€99.00*

Ensure 99 bonus points

item is available on 19.01.2025 . preorder now

practical Scramasax

The Practical Scramasax has been produced in response to many requests from Viking re-enactors. Its 12 ½" blade, with a rounded tip and 1/16" wide edge, make it an ideal secondary weapon. A horizontal-carry scabbard is provided. Key Features * Made for the re-enactor * Authentic look and feel * Complies with safety requirements Measurements BLADE LENGTH: 12 1/2" OVERALL LENGTH: 17 3/4" WEIGHT: 1lb 7oz Category 2: These daggers are likewise suitable for beginners and advanced fighters. All category 2 daggers feature high-quality carbon steel blades which hardly show any scratches when used against other blades. The pommels are riveted at the end of the tang.

€299.00*

Ensure 299 bonus points

Item is normally available in about 4-6 weeks.

Disk sword with brown leather scabbard

The carbon steel blade is hand-forged and has a 2.5 mm striking edge and a rounded safety tip.The blade is screwed to the end of the handle with a countersunk sleeve nut. The handle parts are made of steel, the handle is wrapped in leather. With a particularly narrow crossguard. Blade length 75 cm Total length 94 cm Width of the crossguard 15 cm Weight 1260g

€131.90*

Ensure 132 bonus points

Delivery before Christmas

Practical 11th Century Sword

Another new addition to our line of un-edged "practical" European weapons for use in re-enactment and stage combat. The Practical 11th Century Sword features a "tea-cosy" pommel and a sculptured cross that curves gently towards the blade. The broad blade has full-length fullers and is very lively for an un-edged blade. It weighs around 950 grams. Our Practical broadswords are all based on authentically styled swords in our collection but they are tailored to meet the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of today´s re-enactment societies. The blades are crafted from 1065 high-carbon steel, hardened to 50HRC, which restricts edge-notching to acceptable levels while providing resilience and protection against brittleness. While the blades are substantial, they are fullered to provide balance and good handling characteristics. They feature 2 mm wide edges and rounded tips for safety. The tangs are also substantial, with radiused corners at the blade shoulders and no welds. The end of the tang is riveted over the pommel, which both eliminates any possibility of inadvertent disassembly and provides a traditional means of tightening a loose hilt. The hardwood grips are leather-covered. The scabbards are fabricated in glass-filled resin, to provide great impact resistance, to eliminate swelling and to minimize blade corrosion problems. The scabbards now feature belt rings that adjust to allow vertical or horizontal carry. The wood-grain finish is attractive, but most re-enactors will decorate the scabbard to match their persona. MEASUREMENTS: PRODUCT LENGTH: 92 cm BLADE LENGTH: 76.5 cm PRODUCT WEIGHT: 950 grams Category 2: These swords are likewise suitable for beginners and advanced fighters. All category 2 swords feature high-quality carbon steel blades which hardly show any scratches when used against other blades. The pommels are riveted at the end of the tang.

€259.00*

Ensure 259 bonus points

Item is normally available in about 4-6 weeks.

Scabbard for Hand-and-a-Half sword with belt, brown

The brown scabbard is made from hand sewed leather and comes with steel fittings on both ends. Inclusive belt. Details: Color: brown Weight: 0.46 kg Maximum length of the blade: 93 cm Width at the top: 4 cm Width at the opening: 6.3 cm

€129.00*

Ensure 129 bonus points

Item is normally available in about 10-14 days.
A delivery before Christmas cant be guaranteed

Knight Errant Stage Combat Sword

This historically researched sword is made of a full-tang, thick-edged, 1065 high carbon steel blade with peened construction using solid brass parts, for use as a two-handed sword on stage. Leather-wrapped wood grip. Leather scabbard with metal accents included. Overall length 49-1/2 inches. We've been asked for years for a good set of historically researched swords to perform with on stage. We wanted both authenticity and durability; the kind of sword you can bang edge to edge to complete your performance with confidence and look good doing it. Popular in Europe, our Windlass Stage Combat swords and rapiers have the thick edges and rolled tips needed for live steel action. The Knight Errant is a good two-handed sword. Constructed with a strong, full tang with peened construction using solid brass parts, a leather wrapped wood grip for a strong hold and high carbon steel blade providing years of rugged use. A leather scabbard with metal accents is included. Don't just act, perform! Overall Length: 49-1/2" Blade Length: 38-1/2" Blade Width: 2" Blade Thickness : 3-16" Weight: 3lbs/8oz Material: 1065 High Carbon Steel

€197.10* €219.00* (10% saved)

Ensure 198 bonus points

Delivery before Christmas

Practical Basket Hilt

The Practical Basket-Hilt Swords and are built for the re-enactor. The basket is identical to the historic original, but the grips are leather-covered and the blades are unsharpened, with 0.16 cm safety edges and a rounded tip, complying with the combat rules of many re-enactment societies. Scabbards are finished in matte black, ready for owner customization if desired. KEY FEATURES: o Made for the re-enactor o Authentic look and feel o Complies with safety requirements MEASUREMENTS: BLADE LENGTH: 80.65 cm HANDLE LENGTH: 16.51 cm OVERALL LENGTH: 96.84 cm WEIGHT: 1,59 kg Category 2: These swords are likewise suitable for beginners and advanced fighters. All category 2 swords feature high-quality carbon steel blades which hardly show any scratches when used against other blades. The pommels are riveted at the end of the tang.

€439.00*

Ensure 439 bonus points

Item is normally available in about 4-6 weeks.

Reenactment bastard sword with sheath

The hand-forged blade is made of carbon steel. It has a striking edge of 0.1‘‘ and a rounded safety tip. The blade is screwed onto the handle with a recessed sleeve nut. The handle parts are made of steel and are wrapped in leather. The wooden sheath is wrapped in leather and features metal fittings. Blade length 33.5’’ Total length 42’’ Width of the hand guard 7.9’’ Weight 56.4 oz.

€124.95*

Ensure 125 bonus points

item is available on 03.04.2025 . preorder now

German Sword

Swords made from Paul Chen, with a full tang construction and a riveted blade at the end. Blade Material AISI 1090 Carbon Steel forged, Guard and pommel made from steel. Wooden handle with leather. Blade thickness 2.5 mm, rounded tip. ABS scabbard with metal mountings. Blade length: 76 cm Total length: 93 cm Handle length: 10.5 cm Max. Blade width: 4.5 cm Blade thickness: 7 mm Size of the guard: 16 cm Weight without scabbard: 950 g Weight with scabbard: 1250 g Category 2: These swords are likewise suitable for beginners and advanced fighters. All category 2 swords feature high-quality carbon steel blades which hardly show any scratches when used against other blades. The pommels are riveted at the end of the tang.

€289.00*

Ensure 289 bonus points

Item is in field warehouse, long distance shipping.

Gladius

A classic Imperial Roman short sword, named for where an original was found in the ruins of Pompeii (reliably dating from 79 CE). Although the Pompeii blade is double edged, it does not have the distribution of mass to make it an efficient cutting sword. Our version features a full tang construction, high carbon blade, hard wood handle. Details: Blade length: 50 cm Handle/Hilt length: 12 cm Overall: 75 cm Weight: 0.96 kg Category 2: These swords are likewise suitable for beginners and advanced fighters. All category 2 swords feature high-quality carbon steel blades which hardly show any scratches when used against other blades. The pommels are riveted at the end of the tang.

€199.00*

Ensure 199 bonus points

Item is normally available in about 10-14 days.
A delivery before Christmas cant be guaranteed

back on stock

Silver Stage Combat Rapier

Stage combat rapiers have to meet different requirements from battle-ready rapiers. In order to minimize the risk of injury from cuts and thrusts during stage combat with fencing weapons, this silver stage combat rapier has back edges that are at least 3 mm thick everywhere and it even has a flattened point.It weighs a little less than a kilogram, so our silver stage combat rapier is light and highly manageable. Good balance is not the only characteristic that makes this stage combat rapier manageable – its grip is also very important. Because it is wrapped with both smooth and braided silver-colored wire, it is especially comfortable to grasp. The delicate knuckle bow and finger guard give this stage combat rapier a graceful, romantic look and also provide finger protection when a technique requires them to be placed above the crossguard. It includes a leather scabbard with a silver-colored mount and chape. • Total length: 109 cm • Blade length: 92.5 cm • Grip length: 10 cm • Weight: 0.96 kg • Blade thickness (base): 3.8 mm • Blade width (base): 1.7 cm • Point of Balance (PoB): 11 cm

€224.10* €249.00* (10% saved)

Ensure 225 bonus points

Delivery before Christmas

Hand-and-a-Half-Sword

This medieval sword has a pommel and guard made of steel. The long handle and the excellent balance make this sword very fast and dangerous. The forged high carbon blade features a hardness of 48-52 HRC, has no sharp edges and is fully battle ready. Details: Total length: 105 cm Blade length: 83 cm Blade width: 4 cm Edge thickness: 2.5 mm Handle length: 15 cm Centre of Balance: 10 cm below guard Weight: 1500 g Category 3: These swords are top-quality battle ready swords. They are likewise suitable for beginners and advanced fighters looking for a sword with a good price-performance ratio and great durability. All category 3 swords feature high-quality carbon steel blades which are tough and flexible at the same time. When used against other blades they show hardly any scratches. The pommels are riveted at the end of the wide tangs.

€289.00*

Ensure 289 bonus points

Item is normally available in about 6-8 weeks.

Norman Sword

Sword made from Paul Chen, with a full tang construction and a riveted blade at the end. Blade Material AISI 1090 Carbon Steel forged, Guard and pommel made from steel. Wooden handle with leather. Blade thickness 2.5 mm, rounded tip. ABS scabbard with metal mountings. Blade length: 76 cm Total length: 91 cm Handle length: 10 cm Max. Blade width: 4.2 cm Blade thickness: 5 mm Size of the guard: 8 cm Balance Point: 15.5 cm below guard Weight without scabbard: 1250 g Weight with scabbard: 1450 g Category 2: These swords are likewise suitable for beginners and advanced fighters. All category 2 swords feature high-quality carbon steel blades which hardly show any scratches when used against other blades. The pommels are riveted at the end of the tang.

€269.00*

Ensure 269 bonus points

Item is in field warehouse, long distance shipping.

Viking Sword

This viking sword has a pommel and guard made of steel. The long handle and the excellent balance make this sword very fast and dangerous. The forged high carbon blade features a hardness of 48-52 HRC, has no sharp edges and is fully battle ready. Details: Weight: 1.44 kg Blade length: 72 cm Handle length: 11.7 cm Total length: 90 cm Category 3: These swords are top-quality battle ready swords. They are likewise suitable for beginners and advanced fighters looking for a sword with a good price-performance ratio and great durability. All category 3 swords feature high-quality carbon steel blades which are tough and flexible at the same time. When used against other blades they show hardly any scratches. The pommels are riveted at the end of the wide tangs.

€279.01*

Ensure 280 bonus points

Item is normally available in about 10-14 days.
A delivery before Christmas cant be guaranteed

One and a half-sword

The blade is screwed to the handle end with a recessed sleeve nut. The sheath is made of wood with leather cover and metal fittings. Blade length 91 cm Total length 117 cm Width of the quillons 23,5 cm Weight 1450 g

€119.00*

Ensure 119 bonus points

item is available on 19.01.2025 . preorder now

Dark Middle Age sword

This middle age sword has a pommel and guard made of steel. The long handle and the excellent balance make this sword very fast and dangerous. The forged high carbon blade features a hardness of 48-52 HRC, has no sharp edges and is fully battle ready. Details: Weight: 1.4 kg Blade length: 71 cm Handle length: 11.5 cm Overall length: 89.5 cm Category 3: These swords are top-quality battle ready swords. They are likewise suitable for beginners and advanced fighters looking for a sword with a good price-performance ratio and great durability. All category 3 swords feature high-quality carbon steel blades which are tough and flexible at the same time. When used against other blades they show hardly any scratches. The pommels are riveted at the end of the wide tangs.

€259.00*

Ensure 259 bonus points

Item is normally available in about 10-14 days.
A delivery before Christmas cant be guaranteed

Tinker Norman Sword blunt

New to the Tinker Pearce series of Medieval swords are the Norman swords in both sharp and re-enactment blunt versions. The Norman swords, with their distinctive cruciform guards and brazil-nut pommels, are similar in weight and static balance and offer virtually identical handling characteristics. Both are harmonically balanced – to optimize cutting ability in the case of the sharp version and to provide authentic handling characteristics for the re-enactor. The blades are forged in 5160 high carbon steel and hardened to HRC 50-52 allowing superior edge retention on the sharp and anti-burr safety on the blunt. Grips are wood-cored and leather-covered over a cord wrap. Made by Hanwei. This is the blunt version, please find the sharp version # 3823. Details: Overall length: approx. 120 cm Blade Length: approx. 78 cm Blade Material: 5160 High carbon steel HRC: 50-52 Weight: approx. 1127 g Handle Material: wood-cored and leather-covered over a cord wrap Category 2: These swords are likewise suitable for beginners and advanced fighters. All category 2 swords feature high-quality carbon steel blades which hardly show any scratches when used against other blades. The pommels are riveted at the end of the tang.

€529.00*

Ensure 529 bonus points

Item is normally available in about 4-6 weeks.

Urs Velunt battle sword hand and a half with scabbard

The carbon steel blade is hand-forged and has a striking edge of 2.5 mm and a rounded safety tip. The blade is screwed to the end of the handle with a countersunk sleeve nut. The handle parts are made of steel, the handle is wrapped in leather. The wooden sheath is covered with leather and has a strap. Blade length 88 cm Total length 115 cm Width of the cross-guard 20.5 mm Weight 1560 g

€129.00*

Ensure 129 bonus points

item is available on 19.01.2025 . preorder now

Battle Ready Sword Crusader

The blade is made of high carbon steel, the handle material is made of leather. The wooden sheath has a leather coating and metal fittings. The pommel end is decorated. Blade length: 32,5’’ Total length without sheath: 40’’ Total length with sheath: 43’’ Weight without sheath: 46 oz Category 1: These swords are suitable for beginners who want to buy their first battle ready sword or need a sword for training purposes. All category 1 swords feature simple high carbon steel blades which will sustain scratches and nicks when used against tougher blades. The pommels are screwed or simply riveted at the end of the tang.

€119.01*

Ensure 120 bonus points

item is available on 03.04.2025 . preorder now

Practical Cup-Hilt Rapier

Designed for the rapier fencer with a preference for the cup-hilt style who wishes to spar in safety, the Practical Cup-Hilt Rapier fits the bill perfectly. The blade quality corresponds to the other practical models. Key Features: * Safe Sparring * High-Carbon Flex-Tempered Blade Details: Overall length: approx. 113 cm Blade length: approx. 94 cm Weight: approx. 908 g Point of Balance: approx. 14 cm Point of Harmonics: approx. 50.8 cm Width at Guard: approx. 1.9 cm Width at Tip: approx. 1.02 cm Thickness at Guard: approx. 0.64 cm Thickness at Tip: approx. 0.26 cm Category 2: These swords are likewise suitable for beginners and advanced fighters. All category 2 swords feature high-quality carbon steel blades which hardly show any scratches when used against other blades. The pommels are riveted at the end of the tang.

€389.00*

Ensure 389 bonus points

Item is in field warehouse, long distance shipping.

Hand-and-a-Half-Sword

This medieval sword has a pommel and guard made of steel. The long handle and the excellent balance make this sword very fast and dangerous. The forged high carbon blade features a hardness of 48-52 HRC, has no sharp edges and is fully battle ready. Details: Total length: 106 cm Blade length: 83 cm Blade width: 4 cm Edge thickness: 2.5 mm Handle length: 15 cm Centre of Balance: 10 cm below guard Weight: 1500 g Category 3: These swords are top-quality battle ready swords. They are likewise suitable for beginners and advanced fighters looking for a sword with a good price-performance ratio and great durability. All category 3 swords feature high-quality carbon steel blades which are tough and flexible at the same time. When used against other blades they show hardly any scratches. The pommels are riveted at the end of the wide tangs.

€289.00*

Ensure 289 bonus points

Item is normally available in about 6-8 weeks.

Rapier

By the name rapier in medieval ages you would have called heavy and very long swords with a big and heavy guard this way. Blade length: 90 cm Total length: 116 cm Max. Blade width: 3 cm Blade thickness: 4 mm Size of the guard: 30 cm Weight without scabbard: 1150 g Blade Material: flexible Carbon Steel Category 1: These swords are suitable for beginners who want to buy their first battle ready sword or need a sword for training purposes. All category 1 swords feature simple high carbon steel blades which will sustain scratches and nicks when used against tougher blades. The pommels are screwed or simply riveted at the end of the tang. The scabbard is included!

€139.00*

Ensure 139 bonus points

item is available on 03.04.2025 . preorder now

Urs Velunt Practical Sword, 110 cm

The Urs Velunt Practical Sword from Haller features a forged blade made of spring steel with a Rockwell hardness of 50-55°. The blade has a rounded safety tip and is riveted to the handle end. The wooden handle is wrapped with leather, the pommel and finger-guard are made of steel. A wooden sheath with metal fittings is included. Details: Overall length: approx. 110 cm Blade length: approx. 86 cm Overall length with sheath: approx. 119 cm Blade Material: Spring steel Handle Material: Wood Weight without sheath: approx. 1350 g Category 1: These swords are suitable for beginners who want to buy their first battle ready sword or need a sword for training purposes. All category 1 swords feature simple high carbon steel blades which will sustain scratches and nicks when used against tougher blades. The pommels are screwed or simply riveted at the end of the tang.

€223.90*

Ensure 224 bonus points

item is available on 10.01.2025 . preorder now

Battle ready sword

Sword with a full tang construction and a double screwed blade at the end. Blade Material carbon steel, Guard made from steel. Handle with leather. Blade length 75 cm Total length 103 cm Handle length 25 cm (16 cm net) Max. Blade width 5 cm Blade thickness 3 mm Weight without scabbard 1750 g Category 1: These swords are suitable for beginners who want to buy their first battle ready sword or need a sword for training purposes. All category 1 swords feature simple high carbon steel blades which will sustain scratches and nicks when used against tougher blades. The pommels are screwed or simply riveted at the end of the tang.

€103.90*

Ensure 104 bonus points

Delivery before Christmas