High Elven Warrior Sword

A replica of the massive mace wielded by the Dark Lord Sauron in the prologue of The Lord of the Rings: The Fellowship of the Ring. When Sauron's forces battled the Last Alliance of Elves and Men on the slopes of Mount Doom, Sauron emerged on the battlefield wearing blackened steel armor. In one iron gauntlet he held a massive six-bladed, black iron war mace. On one finger he wore the source of his power, The One Ring. With every swing of this terrible weapon Sauron crushed his foes, sending intimidation and fear throughout the ranks of all who would stand against him. This replica of the actor scale prop used in the movie is crafted of reinforced fiberglass-resin with an aged iron finish. Close attention to detail is a top priority in every piece, down to the intaglio-etched surface and corroded metal coloring. The oversized One Ring worn by Sauron is also included, crafted in gold plated solid metal. Displays on a polystone wall mount (mounting hardware and instructions included). Also included is a 53” in overall length, cloth war banner with the Red Eye of Sauron. Details: Blade length 39.37cm Total length 117.79cm Mace Material: fiberglass resin Banner length: 135 cm

These are the officially Licensed exact reproductions of the Daggers used by Legolas in Peter Jackson's Lord of the Rings Trilogy. They come in a set of two with plaque. Overall Lengths: 56.83 cm Blade Lengths: 40 cm Blade Thickness: 0.48 cm Blade Material: Tempered, 420 J2 stainless steel, with a gold-tone color. Full length tang construction. Handle: Solid American oak with an Elven vine design, cast metal guard and pommel. Plaque: 32.07 cm x 39.85 cm x 1.9 cm wood, adorned with the badge of the Greenleaf family of Legolas. Hardware, instructions included. This sword is an official item produced by United Cutlery under the licence of New Line Cinema!

Arwen's sword is called Hadhafang which means Throng-cleaver. It once belonged to the Elven princess Idril, who wed a mortal man and bore Earendil, the father of Elrond who in turn was father to Arwen. Before Arwen's birth Elrond wielded Hadhafang at the end of the second age of Middle-Earth, during the Last Alliance of Elves and Men in the great battle against Sauron. Later his daughter Arwen used Hadhafang when she aided Frodo in his escape from the Ringwraiths. Inscribed on the blade are runes in the Elven language of Sindarin that say "aen estar Hadhafang i chathol hen, thand arod dan i thang an i arwen." Which translates to "this blade is called Hadhafang, a noble defense against the enemy throng for a noble lady." The original inscription included the last line "Idril i hel en aran Gond dolen," which translates to "Idril, daughter of the king of the Hidden Rock (Gondolin)." It was dropped from the finished prop due to a lack of space. There is an intentional pun in the inscription - the Sindarin translation of "noble lady" is "Arwen", so in effect, the blade claims to be for Arwen, even though it was made for her grandmother. Includes a parchment certificate of authenticity. Overall Length: 96.84 cm Blade Length: 76.2 cm Blade Thickness: 0.64 cm Blade Material: Tempered 420 J2 stainless steel, false-edged. Hand Grip: Wood handgrip adorned with an Elven vine design, solid metal pommel, rat-tail tang construction. Display: 30.32 cm x 10.16 cm x 10.95 cm wood, silkscreened Elven design. Weight: 2.72 kg This sword is an official item produced by United Cutlery under the licence of New Line Cinema!

Eldest son of Denethor, the steward of Gondor,TM BoromirTM was a prince in all but name: he was implanted into a noble house and heir apparent to a ruling tradition that spanned back for a thousand years. Boromir was a proud and strong man who was considered by his fellow soldiers to be one of the most skilled swordsmen of Gondor. He triumphed as a captain in the Gondorian army while leading the forces against SauronTM at Osgiliath, where he deterred a throng of OrcsTM that had overrun the former capital city. Following a powerful dream Boromir shared with his brother Faramir, Boromir´s father commanded his son to ride north as the ambassador for Gondor to attend the Council of Elrond.TM. He later agreed to join the Fellowship on its quest to destroy "The One Ring.TM" In a single moment of weakness, Boromir attempted to take the Ring from Frodo,TM which would in turn lead to his demise as he single-handedly defended hobbits, Merry and Pippin, from the hands of Saruman´sTM Uruk-haiTM before falling under a rain of arrows. Boromir´s sword was single-handed, big, broad and powerful - a fit complimentary to its owner. To use it required someone with great strength, which this skilled warrior abundantly possessed. The blade´s flattened diamond shape and equally wide fuller reduced weight, yet retained strength in the end of the blade by stopping just short of the tip. It was equally effective for slashing against lightly armored opponents and for thrusting into more heavily protected enemies. The guard, similar to that of his father´s sword, showed a warrior´s flourish in that it was formed from a square-edged piece of steel that had been twisted before being curved into a crescent. The handgrip was wide like the blade, and the pommel was an elegant and simple piece of steel that added weight to balance the blade. THE SWORD OF BOROMIRTM Includes a parchment certificate of authenticity and a wood display plaque. OVERALL LENGTH: 99.06 cm BLADE LENGTH: 76.68 cm BLADE THICKNESS: 0.64 cm BLADE MATERIAL: Tempered, 420 J2 stainless steel with a fuller grind, false-edged. HANDLE MATERIAL: Solid metal guard and pommel, antique metal finish, genuine leatherwrapped grip, tapered tang construction. PLAQUE: 30.80 cm x 33.97 cm x 1.91 cm wood, silkscreened design. Hardware, instructions included.

United Cutlery presents Strider's Ranger Sword, the collectible reproduction sword featured in the Lord of the Rings films. Strider (also known as Aragorn) is the son of Arathorn, and heir to the Kingdom of Gondor. His ancestor, Isildur, was the King who cut the Ring of Power from the hand of Sauron with the sword Narsil. Strider has served as a Ranger and joins the Fellowship to destroy the Ring that threatens his countrymen. Details: Overall Length: 120 cm Blade Length: 91.44 cm Blade Thickness: 0.64 cm Blade Material: Tempered 420 J2 stainless steel, false-edged. Handle Material: Solid metal crossguard and pommel, antique metal finish, genuine leather-wrapped grip, rat-tail tang construction. Plaque: 27 cm x 33.66 cm x 1.9 cm wood, silkscreened with the heraldic insignia of the Kingdom of Gondor.This sword is an official item produced by United Cutlery under the licence of New Line Cinema! Please Note: The matching sheath for the sword can be found here.

This sword is an exact reproduction of Theoden's sword that served him in the Hornburg against Saruman´s army of orcs, and at Pelennor fields against the forces of Mordor. The blade has been made of high-quality 420 J2 stainless steel. The sword features a solid metal guard and pommel with an antique brass-plated finish. The hilt is cast in the symbols of the famed horses of Rohan and the grip is wrapped in genuine leather. Presented with a wooden wall display plaque adorned with the icon of Rohan. This sword is an official item produced by United Cutlery under the licence of New Line Cinema! All measures are subject to estimation. Details: Weight: 1899 g Total length: 92.71 cm Blade length: 69.85 cm Blade thickness: 0.64 cm

The sword of the Elvenking was one of two twin swords crafted for Thranduil by the finest smiths of the Woodland Realm. The blade and flowing hilt are forged with engraved vine and leaf symbols representing the forests of the Greenwood, all forged from a single piece of silver Elven steel. This replica features a stainless steel blade and cast metal hilt with authentic detailing to precisely match the movie prop. It is presented with a wood wall display featuring graphic motif of Thranduil.

Ringwraiths, also called Dark Riders or the Nazgul, are the shadow servants of Sauron. There are nine of them to represent the nine mortal kings that Sauron corrupted with his Ring of Power. They can sense when the Ring of Power is near and can see the Ringbearer even more clearly when he puts it on. The Ringwraith's sword was built by armorers of the dark land of Mordor, under the command of their evil master Sauron. This authentically detailed replica is a reproduction of the actual filming prop built by Weta Workshop and used in “The Lord Of The Rings” films presented by New Line Cinema. This massive sword features an authentic battle-worn solid metal crossguard and pommel, genuine leather-wrapped grips and a rat-tail tang construction. The 39 3/4” acid-etched, tempered 420 J2 stainless steel blade is false-edged and has a thickness of 1/4”. Included is a 10”x 13 7/8”x 3/4” wooden display plaque silk-screened with the mark of the Eye of Sauron, master of the Ringwraiths. Also included is a parchment certificate of authenticity verifying its officially licensed collectible status. Details: Total length: 135 cm Blade length: 100 cm Material: 420 J2 stainless steel OVERALL LENGTH: 53" BLADE LENGTH: 39-3/4" BLADE THICKNESS: 1/4" BLADE MATERIAL: Acid etched, tempered, 420 J2 stainless steel, false-edged. HANDLE MATERIAL: Authentic battle worn solid metal crossguard and pommel, genuine leather-wrapped grip, rat-tail tang construction. PLAQUE: Wood, silk screened Nazgul runes. Hardware, instructions included. SWORD WEIGHT: 12.10 lbs This sword is an official item produced by United Cutlery under the licence of New Line Cinema !