10% discount on products from Extrema Ratio, Haller Stahlwaren and Smith & Wesson

M-24 grenade Stielhandgranate, Germany

€42.00*

Item is normally available in about 10-14 days.

Product number: 88466
You get 42 bonus points for this order
Product information "M-24 grenade Stielhandgranate, Germany "
M-24 grenade Stielhandgranate, Germany (used in World War I and II).

The pomegranate handle was introduced in 1915 and the design was developed in the First World War. The detonator was by friction. This method was rare in other countries, but widely used in German grenades.

The shell was composed of a hollow handle with a detonator and an explosive head at one end. Inside the hollow handle, a rope with a porcelain ball was attached to the detonator. The rope is held in place by a removable lid at the base. To use the grenade, the cap from the base is unscrewed, allowing the ball and the rope drop. By pulling the rope, it dragged a steel rod through the fuse, causing it to turn on and begin the pre-detonation of five seconds.

The first handle grenades had uncovered rope, which came out of the handle near the bottom (instead of going into this, covered by removable from the base). This caused the strings had a tendency to tangle and trigger grenades when the German soldiers took them out, causing severe (and usually fatal) injuries.

Handle grenades were disassembled in boxes, wooden (later metal) and the assembly of these was done prior to combat. Inside the lid of the box there was the following reminder: "Vor Gebrauch sprengkapsel einsetzen", (in English: insert the detonator before use).

Dimensions: 35 cm
Weight: 543 g
Epoch: World War I & II 1914-1945
Type Collectible: Hand grenades

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Manufacturerinformation (GPSR)

Joh. Vogler GmbH
Saturnstr. 50
85609 Aschheim

Telefon +49 89/991947-0
info@vogler-gmbh.de

Customers also bought

Super Edge
The Super Edge is a hard working, sheath knife in the very smallest package available. This rugged little workhorse can cut through the tough materials that would make a bigger knife "choke". It's diminutive overall length and feather light Secure-Ex sheath make it a natural for attachment to a key ring, zipper pull, "D" ring or belt loop. It's so light and comfortable to carry you'll never notice it when it's casually looped around your neck, conveniently laced to your shoe or cunningly pinned inside the crown of your hat. Comes complete with Secure-Ex sheath Specifications: Weight: 0.8 oz Blade Thick: 5/64" (2mm) Blade Length: 2" Handle: 2 5/16" long. Kraton® Steel: 420 Sub Zero Quench Overall Length: 4 5/16" Sheath: Secure-Ex

€28.90*

Item is in field warehouse, long distance shipping.

Banshee
Bred in the jungles of Asia, our Banshee sword has its origins in the Thai "Krabi" and its close cousin, the Burmese "Dah." Extremely strong and very quick, the Banshee is a cutting sword first and last, with a slightly weight-forward balance for slashing through jungle growth with ease. The high-carbon blade is heat treated for optimum shock absorption and edge retention, and the spiral-wrapped black leather grip provides excellent handling qualities. The sword comes equipped with a high-retention locking mechanism for safety. The wooden scabbard is finished in matte black, with side rings designed to allow a number of carrying options. A leather shoulder strap is included. KEY FEATURES: * High-carbon steel blade * Leather handle wrap * Excellent balance MEASUREMENTS: BLADE LENGTH: 21" HANDLE LENGTH: 11 1/2" OVERALL LENGTH: 32 1/2" WEIGHT: 1lb 10oz THICKNESS: .260

€349.00*

Item is in field warehouse, long distance shipping.

Akito
Real functional sword. Suitable not only for kata (forms of exercise) or Iaito (drawing exercises), but also for Temeshigiri (cut tests). In order to perform cut tests, it requires a very high quality, sharp and cut containing blade. The blade of the Akito is made of clay hardened 1045 carbon steel with real hamon (temper line). The overall design is very robust, in order to avoid injury. Thus the blade is continuous almost to the end of the handle and is secured by two Mekugis. A beautifully lacquered wooden sheath with eye (Kurigata and Shito-Dome) is within the scope of supply. Details: Overall Length: approx. 102 cm Blade Length: approx. 72.5 cm Blade Thickness: approx. 7.6 mm Blade Material: Carbon steel Weight: approx. 863 g

€164.95*

this item is in stock

Drop Point Spike
Entirely re-engineered for this year our Spike series continue to raise the bar for neck knives! Thin, light and super-tough, their razor sharp, zero ground blades are complemented by heavily scalloped, textured handle scales that offer a comfortable, secure grip. Integral quillons provide a safe stop for index finger and thumb, while the textured Faux G-10 provides excellent positive traction even when your hands are cold, wet and slippery. Available in four distinctive blade shapes (Bowie, Drop Point, Tokyo and Tanto point) they offer all the strength of a solid steel one-piece construction (much stronger than any tactical folder and even rivalling the strength of some boot knives) while still being light enough to carry all day without fatigue. The brand new Spike series is come complete with all-new Secure-Ex sheaths that provide even greater retention and safety. Super lightweight (weighing in at 3oz in the sheath!) the Spikes can be comfortably worn around the neck 24/7 by using the black bead lanyard provided, or carried on a waistband or belt by taking advantage of their new Tek-Lok™ compatible design. Easily concealed, razor sharp and light as a feather – the new Spike series by Cold Steel! Details: Overall Length: approx. 20.4 cm Blade Length: approx. 10.2 cm Blade Thickness: approx. 3 mm Handle Length: approx. 10.2 cm Blade Material: German 4116 Stainless Handle Material: Faux G-10 Weight: approx. 65.2 g Sheath: Secure-Ex® Neck Sheath With Bead Chain Lanyard This is an item from the Cold Steel program in 2013.

€39.95*

Item is in field warehouse, long distance shipping.

Hide Out
The new Hide Out series was designed with one clear goal in mind; to produce a small, inexpensive and astoundingly functional neck knife - one that was just so good, so affordable and so light that there was simply no excuse not to carry one! Its high satin polished, double-edged Japanese AUS 8A blade is "Scandi" ground, which makes it very sharp and also very stiff, allowing for a strong point and effortless penetrative power. Its full tang is encapsulated in a weather proof Griv-Ex™ handle that has been designed to be very thin and flat (so that it won’t imprint on even the thinnest suit, dress slacks or uniform pants). The handle swells at the butt to give the hand great purchase and security while enabling effortless transition between grips. And a generous lanyard hole is easily big enough to attach Paracord further aiding the knife's versatility. A strong, reliable Secure-Ex® sheath with bead chain lanyard completes this lightweight package. Despite its cutting and piercing power, the knife itself is a featherweight, weighing a meager of approx. 54 g! An awesome, affordable, lightweight double edged fixed blade that can easily be carried around the neck, tucked into a boot, attached to a belt or even carried in a pocket instead of a folder, the Hide Out sets a new standard for versatility. There is simply no excuse not to own one! Details: Overall Length: approx. 16.5 cm Blade Length: approx. 7.6 cm Blade Thickness: approx. 3 mm Handle Length: approx. 8.9 cm Blade Material: German 4116 Stainless Handle Material: Griv-Ex™ Weight: approx. 53.9 g This is an item from the Cold Steel program in 2013.

€39.90*

Item is in field warehouse, long distance shipping.

Handforged Naginata
The Naginata, famed weapon of the Sohei, or warrior monks, of medieval Japan was fearsome in the hands of a skilled combatant and is today of great importance in the martial arts field. This naginata kann be used for training and cutting and is a real weapon and not a decorative item. The Naginata is secured with 2 Mekugi in the bar. The handle of the Naginata ist oval shaped and about 4cm of height and 2,5 cm of wide. Details Total length: 180 cm Blade length: 54 cm Weight: 1.75 kg Blade material: 1050 steel This sword is hand-forged, has a sharp blade, and is suitable for tameshigiri cutting tests.

€139.00*

item is available on 28.08.2025 . preorder now