10% discount on all products from Windlass Steelcrafts

Fighting Shield

€117.90*

Item is in field warehouse.

Product number: 17011
You get 118 bonus points for this order
Product information "Fighting Shield"
The shield was the most important protective part the ancient warrior had in his equipment and essential in close combat. It was often used to prevent the sword from damage or to protect the warrior from incoming arrows and adversarial hits.

The back of the shield features two leather straps.

Details:
Diameter: 61 cm
Weight: 3,8 kg

2 of 2 reviews

5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


July 14, 2010 13:24

Mittlerweile habe ich Zeit gefunden, dass Schild im Schaukampf zu testen. Es ist gut zu führen und hat ein gutes Kampfgewicht. Einige Beulen und Dellen liesen sich jedoch nicht vermeiden. Für den Vollkontakt ist es also nur bedingt zu empfehlen. Den Griff musste ich nachträglich polstern, ebenso - für Kämpfer mit längeren Armen - die Schildkante hinter der Armschlaufe. Auf Dauer gibt es sonst blaue Flecken! Fazit: Für den Schaukampf geeignet. (Wie in der Kaufempfehlung beschrieben) Für ein Schild in diesem Preissegment volle Punktzahl!

July 22, 2007 12:32

Wir haben das Schild im orginal gesehen und sind davon begeistert.

Manufacturerinformation (GPSR)

Swords and more GmbH
Liebigstrasse 2-20
22113 Hamburg
Deutschland

0049 40 36164963
info@swords-and-more.com

Customers also bought

Replacement Arrows Metal, 10 pieces
Replacement arrows for crossbow #84515, made entirely of aluminum. Details: Material: Aluminum Content: 10 pieces

€13.90*

Item is in field warehouse.

Round battle-ready shield small
Fully battle-ready shield made of high quality hardened steel. With a diameter of approx. 50 cm it weights approx. 3 kg. The shield can be easily painted by using synthetic iron paint, or even car paint. But it is needed to remove the grease first! Details: Material: Hardened steel Diameter: approx. 50 cm Weight: approx. 3.42 g

€219.00*

Item is normally available in about 6-8 weeks.

Tatami Omote - high quality
This mat is made from rice straw and can be used for the traditional japanese cutting test tameshigiri. The mat has a dimension of 180*70-90cm. The mats come loose in a bag.This tatami omote is the high quality. After our experiences in cutting tatami omote during the last years we have decided to offer different qualities of tatami omote. By this we can make sure that each and every cutting customers will be satisfied. The experienced cutter can buy and cut this mat without any problems.The advantages are obvious :- not pre rolled, can be rolled individually- high density, high withstood when cutting- challenging to cut - can be rolled up to 7 or more times into each other in order to make big targetsWe recommend this tatami omote to all customers practicing tameshigiri on a regular basic, to everybody who is looking for a hard to cut target and to every martial arts practicioner who wants to check his technique.When you compare the 2 kinds of tatami omote, basic and high quality, then you will quickly realize that the basic quality tatami omote has only half the withstood the high quality has. Or in other words to say, the high quality is twice the hard to cut as the basic quality. The reason for this lies directly in the structure of the omote. The high quality has a much higher density than the basic quality.If you want to order larger quantities than 200 mats please ask for our offer.

€9.90*

item is available on 29.05.2025 . preorder now

Tatami Omote - basic quality
This mat is made from rice straw and can be used for the traditional japanese cutting test tameshigiri. The mat has a dimension of 180*90 cm. This mat comes single packed in a foil together with a pad of silicon so that the mat wont catch any water during transport or storage. The end of the mat is tied together by some wire which you have to cut of before starting to cut with your blade. This tatami omote is the basic quality. After our experiences in cutting tatami omote during the last years we have decided to offer different qualities of tatami omote. By this we can make sure that each and every cutting customer will be satisfied. The beginner can buy and cut this mat without any problems. The advantages are obvious: - low price - pre rolled, safes time in preparation - soaks water very quickly - easy to cut We recommend this tatami omote to all customers doing tameshigiri for the first time who also want to save time and money but want to cut the traditional way. When you compare the 2 kinds of tatami omote, basic and high quality, then you will quickly realize that the basic quality tatami omote has only half the withstood the high quality has. Or in other words to say, the high quality is twice the hard to cut as the basic quality. The reason for this lies directly in the structure of the omote. The high quality has a much higher density than the basic quality. 1 Mat = 8 EURO If you want to order larger quantities than 200 mats please ask for our offer.Please note: The stand shown is NOT included.

€8.50*

this item is in stock

OSS - AUS 8A
The OSSTM sub-hilt fighter offers all the advantages and performance of a custom knife at a fraction of the price. For the ultimate grip the handle, guard, and sub-hilt are injection molded in one integral piece of Kraton.® This manufacturing method makes the OSSTM more affordable while delivering the durability, security, and control in the hand that the sub-hilt fighter is famous for. Specifications: Weight: 255.15 g Blade Thick: 0.48 cm Blade Length: 20.96 cm Handle: 13.02 cm long. Kraton® Steel: AUS 8A Stainless Overall: 33.97 cm Secure-Ex® Sheath

€99.00*

Item is normally available in about 3-4 weeks.

Practical Tanto
The Practical Series represents our most popular set, offering excellent quality at a great price. The blades are hand-forged high-carbon steel and are differentially tempered using a traditional claying method to produce a HRC60 on the edge (ha) and a HRC40 on the back (mune) with a medium (chu) kissaki. The temper line (hamon) is authentic and prominent. The fittings (koshirae) are superbly antiqued adding to the aesthetics of the set. The saya is done in a deep black lacquer and the sageo is black Japanese cotton. The tsuka has imitation ray skin (same) on it. Cost savings are affected by using fittings, which, while making no claims to authenticity, are very strongly built to withstand the rigors of cutting exercises (tameshigiri). KEY FEATURES: Hand-forged high-carbon steel Differentially tempered Deep black lacquered saya MEASUREMENTS: BLADE LENGTH: 17.78 cm HANDLE LENGTH: 10.16 cm OVERALL LENGTH: 30.48 cm WEIGHT: 170.1 g THICKNESS: 0.64 cm

€199.00*

Item is in field warehouse, long distance shipping.