Raptor Kogarasu Maru Zukuri

€599.00*

Prices incl. VAT plus shipping costs

4 Reviews

Item is in field warehouse, long distance shipping.

ATTENTION: Proof of age required!
No sale to persons under 18 years!

Product number: 11672

You get 599 bonus points for this order

Product information "Raptor Kogarasu Maru Zukuri"

The Raptor Series has been designed for the cutting practitioner who does not necessarily have access to mats but who wishes to practice and perfect his cutting technique.

The blades are forged in 5160 high carbon steel and specially heat treated to produce very high resilience and greater tolerance of misdirected cuts than a conventional differentially tempered blade.

The edge geometry is configured to facilitate the cutting of both soft and semi-hard materials without chipping, allowing the cutter a wide choice of targets.

Made by Hanwei.

Details:

Overall length: 98,5 cm
Blade length: 67 cm
Handle length: 28,3 cm
Overall weight: approx. 1,01 kg
Material: 5160 High carbon steel
Specs will vary slightly from piece to piece.

4 of 4 reviews

5 out of 5 stars

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

Sort by

August 17, 2015 11:02

Das Kogarasu Maru Zukuri der Raptor-Serie besticht durch seine zweischneidige* Klingenausführung sowie ein perfektes Balancing gepaart mit seinem geringen Gesamtgewicht. Es lässt sich hervorragend führen und ermöglicht äußerst präzise Schnitte. Zudem ist der Sound beim Schwingen der Klinge phänomenal ! Punktabzug gibt es lediglich für das fleckige Klingeblatt. *Schneide am Klingenrücken ist stumpf - für mich eine positive Eigenschaft

August 17, 2015 11:02

October 1, 2011 14:01

I received the sword in a neatly wrapped package with no damage or signs of mistreating. The first thing i noticed about the sword is the geometry and weight.The sword has a very fine pointed edge and is incredibly sharp at those ends except the back top side which is not sharpened.The balance itself is focused towards the end of the sword allowing for stronger swings.Overall this sword is meant to cut slighty heavier targets and for example it doesn't do so well against thicker water bottles that aren't heavy or straped down.It does really well against wooden materials and it cuts tamashigiri mats with no problems.A cut of a regular bamboo stick can be done with one stroke.The durability of the sword is incredible.I have made several wrongly placed cuts with this sword that could eventually bend it but the sword remained in perfect shape and it did not chip.All in all this is a beautiful and durable sword and for the right job it is a great tool for its price.

Manufacturerinformation (GPSR)

Swords and more GmbH
Liebigstrasse 2-20
22113 Hamburg
Deutschland

0049 40 36164963
info@swords-and-more.com

Customers also bought

Wall Holder for 2 Samurai Swords

Wall holder for two Samurai swords. With emblem, made from stained wood. Details: Width: approx. 45 cm Height: approx. 28 cm Material: Stained Wood

€29.00*

Im Außenlager - in 5-7 Tagen bei Dir zu Hause

Tinker 9th Century Viking sharp

While not a direct copy of any particular sword, the Viking sword design was inspired by historical examples from the early 9th Century, most notably finds from the area around Trondheim, Norway, where the circular indentation hilt decoration was popular. The scabbards are provided with suspension points and a period chape, giving the sheathed sword a very attractive appearance. The construction of the Viking "pair" differs from other swords in the Tinker series in as much as they are tang-riveted (peened) in period fashion at the pommel, primarily to satisfy Viking re-enactment requirements. As with the other swords in the series, replacement blades are available. Again, the handling characteristics of the two swords are virtually identical. CAS has commissioned Michael `Tinker` Pearce to design a line of swords that will satisfy both the sparring and cutting needs of Western Martial Arts practitioners. The swords meet Tinker`s exacting quality requirements and are built in much the same way as his custom pieces. Made by Hanwei. Details: Overall length: 95 cm Blade length: 76,5 cm Handle length: 16,5 cm Overall weight: 1,24 kg Point of Balance: 12,07 cm Point of Percussion: 51,5 cm Width at Guard: 5,55 cm Width at Tip: 3,81 cm Specs will vary slightly from piece to piece.

€429.00*

Im Außenlager, Langstreckenversand - in 12-14 Tagen bei Dir zu Hause

Kingston Arms by Hanweis

Tourney Hand-and-a-Half Knightly Sword - Blunt

A close recreation of the famous Oakeshott Type XVIIIa.4 sword from Records of the Medieval Sword with some liberties taken to make it safe for reenactment and stage use. This sword proves to be a powerful sight on the field of battle and is a perfect accompinament for a 14th to mid 15th Century man of war. Our Tourney Series Medieval Sparring Swords from Kingston Arms will set a new standard in this price point of re-enactment weaponry. Features like thru-tang handle construction, peened thru-tang stainless steel pommel and guard, 2mm rounded edge thickness make these brutal weapons on the battle field. The cord wrapped leather grip feels exceptional in the hand with an oval cross section and slight barrel shape to keep fatigue at bay. The grip is large enough to accomodate armoured hands. A respectable fuller runs the length of the blade to lighten and counter balance the sword overall. A wood core and leather wrapped scabbard tipped with a stainless chape comes with each sword. Further Tourney Series models are the Viking Sword and Single-hand Swords. The blade is forged from 9260 high carbon spring steel and is tempered to about 50 Hrc, providing a long lasting sword. The guard needs special mention, featuring the King-Peen system. King-Peen is essentially a steel tab on the guard under the grip that is pinned through the tang of the sword. This process keeps the guard from going loose after a lengthy campaign without compromising the strength of the hilt. The pommel is pressed into place and hot peened. Combine these two processes and you get a sword that rings like a bell when struck. Specifications Overall: 41 1/4" Blade Length: 32 3/4" Handle Length: 6" Weight: 3lb 7oz Point of Balance: 4" Point of Harmonics: 21 1/2" Blade Steel: 9260 Specs will vary slightly from piece to piece.

€548.99*

this item is in stock

Pipe Hawk

The new Pipe Hawk from Cold Steel with an overall length of approx. 48 cm and a hawk length of approx. 19 cm is made from 1055 Carbon steel. The handle is made of American Hickory. Do you prize the look and authentic lines of a traditional Pipe Hawk, but have little use for the hollow bowl and the strength-compromised, drilled-out wooden "smoking" handle? Well here is a Pipe Hawk without those disadvantageous features. Precision forged from 5150 carbon steel, the Pipe Hawk offers a long, reasonably wide cutting edge and a solid, fully hardened hammer poll that's turned and ribbed to mimic a hollow pipe bowl. Fitted with an approx. 48 cm long hickory handle and weighing approximately 737 g it's heavy enough to be brutally effective as a chopping tool and weapon plus its solid bowl will drive nails, spikes and stakes with the power of a framing hammer. Details: Weight: approx. 737 g Overall Length: approx. 48 cm Hawk Length: approx. 19 cm Blade Material: 1055 Carbon Handle Material: American Hickory The matching sheath has the number 82257.

€49.00*

this item is in stock

John Lee Practical Katana

The John Lee Practical katana made by Haller with the following special features: - Sharp blade made from hand-forged 1095 carbon steel (not stainless) - Differentiated hardened with clay coating, real hamon line - Suitable for cutting tests, 60 HRC on the blade, 40 HRC on the back - Blade clamp (Habaki) made from brass, Tsuba made from Zinc-aluminum-casting - Handle wrapped with black cotton, underlaid with real ray skin - Blade fixed at handle with two nogs (Mekugi) - Sheath matt varnished - A collectors box with cloth bag is within the scope of supply Details: Overall Length: approx. 104.5 cm Blade Length to Tsuba: approx. 74.5 cm Blade Material: 1095 carbon steel Handle Length: approx. 30 cm Weight: approx. 1190 g

€279.00*

item is available on 04.06.2026 . preorder now

Sokueto Hondachi Katana

This is a Thaitsuki sword and we believe in quality over quantity. Thaitsuki Nihonto swords are hand-made, fully functional, and "battle ready" katanas. They are best suited for practice in all sword arts, completion cutting, and collecting. The Japanese Katanas, hand-made by Thaitsuki Nihonto, are of the highest quality, traditionally made and perfected for over 400 years. Thaitsuki Nihonto has been producing Japanese swords for professional collectors and practitioners of Iaido, Iaijutsu, and Kenjutsu for over 400 years!The blade of the Suekuto Hondachi Katana is handmade and forged from special high carbon Japanese steel (DC53) making a strong, flexible blade with naginata-hi (groove). With 2 different HRC grades on the back (40) and on the edge (60) the blade is very strong. The blade is about 7mm wide on the habaki and about 5,5mm on the chu kissaki.The tsuka (handle) is covered in black same (ray skin) and the Tsuka Ito (handle wrap) is best japanese white 10mm wide silk. The brass tsuba shows a pair of tigers. The koiguchi is made from real buffalo horn and the handmade saya was made from dried poplar wood. The kurigata is made from wood and is covered with 92,5% silver. The habaki and the seppa are also made from 92,5% silver and the habaki shows a sakura motif. At the end of the saya is a kojiri made from real buffalo horn mounted which prevents the saya from breaking when hit hard on the floor, eg when training iaido.Fuchi and Kashira are detailed in gold and polished. The menuki are made from 92,5% silver and show a dragon.The Suekuto Hondachi Katana is a fully functional Japanese katana and not a replica, it is considered a weapon and it is extremely sharp. This sword can easily sever a 7" thick bamboo with single stroke. The Suekuto Hondachi Katana can be completely disassembled for full maintenance.This sword can also be made dull so that you can use it for practice, like in Iaido ! Details : Blade length: 73.66 cm Tang length: 25.4 cm Tsuka length: 27.94 cm Overall length: 101.6 cm Balance Point: 12.7 cm Tsuka Ito: white silk Weight with Saya: 1520 g Weight without Saya: 1210 g Imogata shaped Tsuka: the handle becomes thinner towards the kashira Ha (edge) 60-63 HRC Habuchi (temper line) 43-46 HRC Ji bis Mune (edge to back of the blade) 33-36 HRC

€1,499.00*

Dieser Artikel hat eine Lieferfrist von ca. 10-14 Tagen.