Raptor Unokubi Zukuri

€599.00*

Prices incl. VAT plus shipping costs

4 Reviews

Item is in field warehouse, long distance shipping.

ATTENTION: Proof of age required!
No sale to persons under 18 years!

Product number: 11664

You get 599 bonus points for this order

Product information "Raptor Unokubi Zukuri"

The Raptor series, our new line of cutting katanas, has been designed for the cutting practitioner who does not necessarily have access to mats but who wishes to practice and perfect his cutting technique. The blades are forged in 5160 high-carbon steel and specially heat treated to produce very high resilience and greater tolerance of misdirected cuts than a conventional differentially tempered blade. The edge geometry is configured to facilitate the cutting of both soft and semi-hard materials without chipping, allowing the cutter a wide choice of targets.

The Raptor Unokubi-Zukuri (Cormorant's Neck) blade design is patterned after the shape of the Naginata, the powerful long-handled weapon popular between the 12th and 14th centuries. Notable for the strongly relieved shinogi-ji and diamond-shaped kissaki, the Unokubi-Zukuri provides excellent balance in a strong cutting blade.

Details:
Overall length: 45"
Blade length: 28.5"
Handle length: 13"
Weight: 2lb 12oz
5160 high-carbon steel
Details will vary slightly from piece to piece.

4 of 4 reviews

5 out of 5 stars

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

Sort by

July 10, 2015 10:28

Ich bin absolut begeistert von diesem Schwert ! In Punkto Qualität und Funktionalität absolut überzeugend. Die Form und Ausführung der Klinge ist zweifelsfrei außergewöhnlich und wunderschön. Kaufabwicklung und Zustellung waren zudem höchst zufriedenstellend, top ! Ich kann dieses Prachtexemplar aus der Raptor-Serie nur wärmstens empfehlen. !! Klare Kaufempfehlung !!

September 22, 2012 00:45

This sword came to me with a lot of surface rust and marks. It was dull and not sharp at all, despite Hanwei says that is sharp out of the box. I have already the parctical XL and it was very sharp out of the box and in fine condition. Despite all this i managed to clean the 90% of the rust but some marks remained. The sword has excelent balance much better than the practical XL and the sharpness is something i can fix. The design and the quality is good. I give 3 stars for the balance only.

May 28, 2012 21:04

Ich bin von dem Schwert sehr überzeugt was Funktionalität und Verarbeitung angeht, jedoch ist die Klinge komplett mit Flecken übersäht

April 20, 2012 12:59

Dieser Schwert ist ein absoluter Traum. Der Griff ist sehr ansehnlich und vernachlässigt dabei nicht die Funktionalität. Aber alleine schon die Klinge ist den Kauf wert. Bin froh es meiner Sammlung einverleibt zu haben.

Manufacturerinformation (GPSR)

Swords and more GmbH
Liebigstrasse 2-20
22113 Hamburg
Deutschland

0049 40 36164963
info@swords-and-more.com

Customers also bought

Stand for one sword

High quality stand for one sword with velvet inlays. Total width 39 cm Height 19 cm Depth 8 cm

€19.00*

this item is in stock

Riflemans Hawk

This superb tomahawk features a factory-honed cutting edge. It has two sticking points on its cutting edge for throwing and throws extremely well. The Rifleman´s Hawk has a traditional American hammer-head style butt for hammering stakes. Specifications: Overall Length: 48.26 cm Hawk Length: 20.64 cm Weight: 896 g Primary Edge: 8.89 cm American Hickory Handle The matching sheath has the number 82258.

€49.00*

Im Außenlager, Langstreckenversand - in 12-14 Tagen bei Dir zu Hause

Gil Hibben Genx Pro Thrower Triple Set large

Designed by Gil Hibben, who is a master knife maker, an avid knife thrower, and author of the Hibben knife-throwing guide, the Generation X is Gil's updated design of his original throwers. Constructed with one-piece of tempered AUS-6 stainless steel, these throwers feature an ergonomic handle design that guides the hand into the same consistent and accurate release each time they thrown. Includes a black nylon belt sheath that holds all three throwers and features a reinforced liner and a color Hibben Knives logo patch. Details: Overall Length: approx. 28 cm Blade Length: approx: 14.6 cm Blade Material: AUS-6 stainless steel Weight: 320 g per knife

€79.00*

Dieser Artikel hat eine Lieferfrist von ca. 3-4 Wochen.

Trench Hawk

The new black Trench Hawk from Cold Steel with an overall length of approx. 48 cm and a hawk length of approx. 22 cm is made from 1055 Carbon steel. The handle is made of Black Polypropylene. The Trench Hawk may well be the perfect antidote to the raw terror of eyeball to eyeball combat in the confined spaces of a trench, bunker, alley or narrow hallway. All it takes is one stroke from either the vicious cutting edge or its brutal wedge shaped spike to end the fight and if the party starts at longer range the Trench Hawk's twin "business ends" make an accurate throw a breeze, since there's double the chance of a lethal hit. When used defensively, the Trench Hawk's cutting edge and spike also provide a big advantage, as either can be used for hooking or trapping and, like our Spike Hawk, their combined length can be used to parry or block an incoming blow. Drop forged from 5150 carbon steel and differentially hardened, the head of the Trench Hawk will withstand tremendous blows and the awful stress of continued throwing. The handle of the Trench Hawk is also highly resistant to shock and impact and will withstand abuse that would easily break even a tough hickory handle. And, as an added benefit, is easily and cheaply replaced when finally worn out or broken from repeated throwing (NOTE: any handle can, and will, break eventually). Finally, to help protect its owner from its cutting edge and dangerously sharp spike, it comes with a patented Secure- Ex™ sheath that features a cleverly articulated design. Details: Weight: approx. 680 g Overall Length: approx. 48 cm Hawk Length: approx. 22 cm Primary Edge: approx. 9 cm Blade Material: Black 1055 Carbon Handle Material: Black Polypropylene

€63.91*

Dieser Artikel hat eine Lieferfrist von ca. 3-4 Wochen.

United Honshu Kerambit Satin with shoulder harness

When you need an easily concealed defense weapon, this Honshu Kerambit knife is exactly what you are looking for. It features an approx. 10.2 cm 7CR13 stainless steel blade and an over-molded handle with an open hole pommel for an easy grip. Includes an ABS sheath with a shoulder harness. Details: Overall Length: approx. 22.2 cm Blade Length: approx. 10.2 cm Blade Material: 7CR13 Stainless steel Handle Material: Over-molded

€89.00*

this item is in stock

Throwing Knives Set Scorpion 3-piece

3-part in nylon sheath. The blades are made of 420 stainless steel, partially black coated and wrapped with cord around the handle. Details: Overall length: approx. 16 cm Blade length: approx. 8 cm Blade Material: 420 Stainless Steel Handle Material: Cord wrapped Weight: approx. 65 g

€19.95*

Im Außenlager - in 5-7 Tagen bei Dir zu Hause