Tinker Bastard Sword Sharp with fuller

€409.00*

Prices incl. VAT plus shipping costs

2 Reviews

Item is normally available in about 4-6 weeks.

ATTENTION: Proof of age required!
No sale to persons under 18 years!

Product number: 13797

You get 409 bonus points for this order

Product information "Tinker Bastard Sword Sharp with fuller"

Like the longswords, these Bastard swords are based on the Oakeshott Type XVIIIA and are designed so that both the sharp and blunt versions will perform identically in the hand, offering the possiblity of sparring and cutting with swords that feel and respond in exactly the same way. The sharp blade is produced in two slightly different versions, one diamond-sectioned throughout its length and the other almost identical but fullered for about one third of its length. The blunt has a longer, broader fuller to compensate for the added edge thickness. The tip of the blunt is sufficiently flexible to provide an adequate level of safety. Wheel-type pommels are sized to provide a grip for the second hand when required.

Designed by noted sword smith Michael "Tinker" Pearce and manufacutered by Hanwei, these bastard swords have been are made to satisfy the need of every sword enthusiast, to have a matching set of sharp and blunt swords for cutting and safe training practice. The swords meet Tinker`s exacting quality requirements and are built in much the same way as his custom pieces. Each blade is forged from 5160 Spring Steel, marquenched to the desired hardness of 50-53 Hrc while the tang is drawn back to the low 30s Hrc. The very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dismantling of the hilt assembly for inspection or to exchange blades if needed.

Made by Hanwei

Measurements:
Overall length: 108,59 cm
Blade length: 84,77 cm
Weight:1,08 kg

2 of 2 reviews

5 out of 5 stars

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

Sort by

December 2, 2024 18:53

Bestes Bastardschwert

Gewicht ist etwa 1150g und Schwerpunkt etwa 11cm. Ein tatsächliches Bastardschwert, das einhändig und zweihändig verwendet werden kann. Echt ein Traum zu verwenden, und es ist extrem gut wenn es um Schnittests geht. Die Klinge ist auch verblüffend Steif. Grifflänge ist eher Zweihänder als Bastardschwert aber das macht es sehr schnell und reaktiv. Drei Dinge jedoch zur Warnung: Die Beschläge der Scheide neigen dazu anzugehen, schleift die ecken tiefer oder seid sehr vorsichtig beim Ziehen sonst habt ihr sofort ein stumpfes Schert das nicht so super zum Schleifen ist wegen der Klingengeometrie. 100% Wahrscheinlichkeit für hässliche Kratzer. Die Spitze ist eine Nadel und wird recht einfach verbogen, ich rate dazu diese etwas umzugestalten. Der Griff ist dünn, da braucht ihr etwas wie Lederband oder Tennisschlägerband um den Griff etwas aufzubauen, danach wie gesagt bestes Schwert.

March 10, 2016 12:58

Da dies mein erster Anderthalbhänder ist, habe ich vorweg entsprechend lange recherchiert, bzw. verglichen und mich letztendlich für diesen hier entschieden. Dieses Schwert ist scharf und ziemlich spitz zulaufend, wodurch es sowohl sehr gute Hieb- als auch Sticheigenschaften aufweist. Es ist exzellent ausbalanciert und lässt sich dadurch hervorragend mit einer Hand führen. Außerdem bietet der Griff ebenfalls genug Platz für zwei Hände, wodurch wuchtige Stiche und Hiebe möglich sind. Einziges Manko ist, daß das Leder auf dem Griff nur verklebt und nicht vernäht wurde. Die Schwertscheide ist hochwertig verarbeitet worden und schabt mit ihrem Mundblech, entgegen einiger anderer Rezensionen auf die ich während meiner im Vorfeld erwähnten Nachforschungen gestoßen bin, nicht an der Klinge. Des weiteren bietet die Inbusschraube am Knauf die Möglichkeit, das Schwert zur Reinigung und Pflege zu zerlegen, so das auch eine regelmäßige Behandlung des Erls mit Schwertöl zur Rostprävention möglich wird. Für diesen Preis bekommt man eine hervorragende und wohl voll kampftaugliche Waffe, mit der sich die berühmt berüchtigte "Armlänge Abstand" ohne Schwierigkeiten einhalten lässt!

Manufacturerinformation (GPSR)

Swords and more GmbH
Liebigstrasse 2-20
22113 Hamburg
Deutschland

0049 40 36164963
info@swords-and-more.com

Customers also bought

Synthetic Bastard Sparring Sword - Black Blade & Hilt

A combination of the Extended Pommel and Xtreme Single hand blade becomes the Rawlings Xtreme Bastard Sword. This sword is very popular with younger students where it can be used as a longsword trainer with great effect. Specifications Overall: 44 1/2" Blade Length: 34" Handle Length: 9 1/2" Weight: 1lb 9oz Point of Balance: 5 1/2" Specs will vary slightly from piece to piece.

€119.00*

Im Außenlager, Langstreckenversand - in 12-14 Tagen bei Dir zu Hause

Wall holder for swords

Wall holder for swords, MartoThis metal wall holder holds your sword! It is suitable for displaying most MARTO swords and its inconspicuous design keeps every sword in the foreground. Details: Material: steel Dimensions: approx. 8 x 3 cm

€12.90*

this item is in stock

Tinker Bastard Sword Replacement Blade blunt

This is the replacement blade for the Tinker Bastard Sword blunt. This blade is great for Replacement instead of buying a complete new sword Each replacement blade is forged from 5160 Spring Steel, marquenched to the desired hardness of 50-53 HRC while the tang is drawn back to the low 30s HRC. The very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dismantling of the hilt assembly for inspection or to exchange blades if needed. The replacement blade is designed to work with the Tinker Bastard sword only. Made by Hanwei. Measurements: Blade Length: 84,77 cm

€169.90*

Dieser Artikel hat eine Lieferfrist von ca. 4-6 Wochen.

Camillus

Cuda Flex Fillet Knife with Sheath

The Cuda 6" Flex Fillet Knife with Fisherman's Sheath are two essential pieces of gear for any serious fisherman. Featuring a robust, corrosion resistant blade made of German 4116 Steel with a precision ground edge, the Fillet Knife is perfect for steaking salmon or filleting freshwater bait and fish. To compliment the sturdy blade, the handle features our signature non-slip Cuda scale pattern handle so you can maintain a firm grip in all conditions. The included sheath also boasts commendable features of its own, such as the reversible belt loop for a right or left side fit and water drainage hole. Together, these two items will help take your fishing game to the next level.

€31.90*

Dieser Artikel hat eine Lieferfrist von ca. 3-4 Wochen.

Camillus

Cuda 5.5" Titanium Bonded Large Braid Shear

The Cuda 5.5" Large Braid Shear balances power and functionality well. Featuring large, non-slip Cuda scale pattern handles for comfort and control, stainless steel titanium bonded blades, and dual serrated blades that grip and cut, you can make short work of tough lines with a single snip if the shears. The titanium bonding treatment of the blades also provides exceptional edge retention and corrosion resistance so you can count on consistent, powerful results every time you close the blades over a line regardless of the conditions. Backed by our Lifetime Warranty as well, the 5.5" Large Braid Shear makes for a fine addition to any tacklebox.

€9.90*

Dieser Artikel hat eine Lieferfrist von ca. 3-4 Wochen.

Table Display Stand

This table display stand has been made of wood. Details: Width: 32,5 cm Height: 34 cm Depth: 14 cm

€29.00*

item is available on 04.06.2026 . preorder now

Grinding Service

We are happy to offer you another service. In corporation with a professional smith we are now able to grind all sorts of blades ranging from those of very small knives up to those of hand-and-a-half swords. Prices - plain or serrated knife 19 EURO - machete or axe 19 EURO - short sword up to 40 cm blade length 19 EURO - long sword from 40 cm blade length 29 EURO - handforged katana 39 EURO If you would like us to sharpen your handforged katana please note the following remarks - the katana will be sharpened but not polished - we do sharpen the edge but will not work on cosmetic flaws on the blade - we can sharpen handforged katanas of all major brands eg CAS Iberia, WKC, Cold Steel, John Lee and many more - we do not sharpen real Shinken or historic katanas of value Should you wish to have a knife or another article sharpened which is not from our shop, please place an order via the grinding service first. Print the fulfilment confirmation afterwards and send your knife or sword to the following address: Swords and more GmbH Liebigstr. 2-20 22113 Hamburg Please include your fulfilment confirmation. This is the only way to ensure that your knife or sword will arrive at its proper destination. Make sure to send the article to be grinded with sufficient postage to our storage, as we are not able to accept packages sent carriage forward. If you are ordering the article to be grinded in our shop, simply place the grinding service into your shopping cart. The chosen product will be delivered with a sharpened blade. As sharpening is a process of individualisation, we can not take the item back from you under any circumstances. Please note, that if you chose cash on delivery when ordering a sharpened article, we will charge you with the full amount in a case of non-acceptance. Legal measures will be taken if necessary.

€19.00*

this item is in stock

Details