A2L - Expedition Knife - Leather

This is the exclusive accessory for selected Swords of Darksword Armory. It includes a scabbard with an interlaced sword belt. The scabbards are made with a poplar (wood) core and wrapped in vegetable tanned leather. The belts are woven into the leather. The leather is then hand stitched on the spine (back) of the scabbard. The belts will fit a waist of up to 127 cm. If you want to get this scabbard and belt for your Darksword Armory Sword, just add this product to your shopping cart. This accessory is available for the following swords: • 12th Century Medieval Sword [13467] • 14th Century Gothic Medieval Sword [40339] • 14th Century Medieval Sword [40358] • 14th Century Two Handed Sword [13466] • 15th Century Hand and a Half sword [40347] • 16th Century Two-Handed Sword [40336] • Hand and a half Medieval Knight [13892] • Celtic Anthropomorphic Medieval Sword [13999] • AOV Specter [13805] • Two handed Danish Sword [40352] • The Anduril [40344] • The WitchKing Fantasy Sword [40354] • The Longford [40349] • The Messer [40357] • The Norman Medieval Sword [13633] • The Ranger [40351] • The Sword of Portiers [40346] • The Spartan Sword [13943] • The Carpathian [13896] • The Nomad [13900] • The 2 Handed Norman [13891] • The black Prince [13894] • The Black Death Gothic Sword [40355] • The Waylander [40348] • The Sage [13901] • Limited Edition Excalibur Medieval Sword [40337] • Fantasy Scimitar [40356] • Fëanor’s Two Handed Sword [40359] • The Flames of the Angel Sword [13691] • 5 lobe Viking Medieval sword [40343] • Henry V Sword [13893] • Kurgan Medieval Sword [13940] • Migration Sword II [13895] • Mid 13th C. Sword [13682] • Ring Hilt Swiss Saber [40353] • Scottish Claymore [13918] • The Black Knight [13683] • The Guardian [13684] • The Medieval Knight [13458] • The Two Handed Gothic Sword [13463] • Type XII Medieval Sword [40340] Note: The price is only valid in connection with the purchase of the matching sword. If you only want to buy the scabbard, the price is 249 €.

In history and literature, a Black Knight is a mysterious warrior who hides their identity in order to disguise their motives and allegiance. The Darksword Armory Black Knight Sword is a nod to this literary and historical character, blending historical design with a fantasy flare. The straight, tempered, double-edged blade is based on those swords most often carried by the mounted knights of the medieval period. With full tang construction this sword is fully functional, and has been expertly forged and balanced to be an effective and deadly cutting weapon.More information on the Black Knight Sword, and on the historical and fictional characters that inspired it, can be found below. Blade: 5160 High Carbon Steel. Dual Tempered HRc 60 48-50 at the core Total length: 35″ Blade length: 28″ Blade width at base: 2″ Weight: 2.6 lbs

Honshu is known for its savage blend of tradition and innovation that forges a style and function in its modern, battle-ready weapons that’s beyond compare. The Naginata takes the traditional pole weapon design that was used by the Samurai class and elevates it into a modern battle weapon. It has an 18”, satin-finished 7Cr13 stainless steel blade, secured to the handle with heavy-duty screws and the guard is hefty. It has an injection-molded nylon handle with 30-percent fiber and the EDM surface texture provides a no-slip grip. The impressive naginata is 67” in overall length and it comes with a leather blade sheath with a snap strap closure. Details: Blade material: 7Cr13 stainless steel Total length: 170 cm Blade length: 45.72 cm

The maintainance kit has everything in it which you need for the must of care for your handmade sword. Comes with oil and powder. Oil is used to prevent the rust of the sword. Oil makes a film of the oil between the sword body and the air, and it prevents the oxidization of the sword body. Oil dries in about some time. Therefore, reprint it in the new oil once in a month. The thing which made a whetstone powder-shaped is being packed into the Uchiko. White powder appears from the Uchiko when a sword body is struck with the Uchiko. There are two use purposes. The Uchiko removes the old oil which sticks to the sword body. Furthermore, the Uchiko beautifies the surface of the sword. Nuguigami: The Nuguigami is not just regular paper, it is high quality thick japanese paper for cleaning swords. It is used for wiping out old oil and wiping out the Uchiko. The Mekuginuki is used to remove the Mekugi of the sword. The Mekuginuki can remove the Mekugi with the sharp part. In order to use the Mekuginuki for removing the Mekugi, the hammerhead part can be removed from the rest of the Mekuginuki. How to take care for your sword: How to take care of the sword after an Iaido practices or Tameshigiri will be explained with this topic. Take care of the sword after the practices always. If the care for the sword is neglected, a sword rusts in the sweat of the hand. Face an edge toward the top, and pull out a sword slowly from the sheath. Then, be careful not to damage a sheath. Hold the sword pulled out with your left hand. Then, remove old oil and dust from the sword with the Nuguigami. Put a Nuguigami on the Mune of the sword when wiping the sword, and wipe the sword toward the top from the bottom. Pat a sword body with the Uchiko. Powder equally on the both sides of the sword body. Then, wipe the white powder with the new Nuguigami which is different from the paper used some time ago. Repeat this handle, and remove the blurs of the oil completely. Apply new oil to the sword body, and put away a sword to the sheath. Put the oiling paper on the Mune of the sword when oiling the sword, and oil the sword toward the top from the bottom. Don't oil a sword in quantity very much. Oil equally the both sides of the sword body. If the care for the sword is finished, put a sword in the sword bag, and keep it. Keep a sword in the place where it dries in the shade. How to take care of the sword of this topic isn't perfect. Therefore, remove the hilt once in three months, and care for the tang (Nakago) and so on.

We are introducing a new kind of ceramic steel for sharpening kitchen knives, the C10, with a length of 270 mm. (410 mm including the handle)We have tested it very carefully and found that it brings a tremendously good edge, especially on high quality chef’s knives. What’s good as well is that it has anti-break and shock-absorbing qualities – should you drop it to the floor from a kitchen table, it will most likely not break! Still the surface hardness is as high as 9 on the Mohs scale, only the diamond reach 10.Together with the D12 diamond sharpening steel, this is by far the best solution to offer to quality-minded users, professionals or amateurs.

The PSK Plus XL Light Katana returns with all the features that made it a great katana but with some great improvements. Keeping with our promise for upgrades and advancement, the crisp and clean new look of the furniture (tsuba, fuchi, kashira, menuki) comes from the new tooling of this classic design that will remind you of the early originals. Still featuring the blade geometry of the differentially hardened and forged 1566 forge steel blade of the original. The CAS Hanwei Performance Series is a standard in the Japanese sword market. Being the go-to cutting katana for practitioners, our newly updated Performance Series katana continue to out rank the competition within their niche in the sword world with their consistency and reliability of quality and cutting execution. Highly imitated but never truly replicated, you can purchase with confidence in the CAS Hanwei brand swords with our over four decades of knowledge and expertise in manufacturing. The PSK Plus XL Light Katana was designed for quick-draws and multiple cuts on lighter targets. Keeping the furniture of the Practical Plus Katana and the upgraded natural components of the tsuka, the blade keeps the XL blade geometry but has bo-hi (grooves) on both sides of the blades which lighten the blade. With reduced weight, you can make multiple cuts with less energy on the same target. The 1566 steel and differentially hardened in the traditional manner, producing an edge hardness of HRC60 and spine hardness of HRC40. Cut with speed and accuracy with the PSK Plus XL Light Katana. Made formerly at the legendary Hanwei forge that closed in 2024, the famed artisans of Dalian at the Dragon King forge take the mantle of this legendary brand. Former protégé of Paul Chen and original engineer of the manufacturing of the Hanwei brand, Frenchie Jin knows these swords better than anyone else as he was a part or their original conception at the original Hanwei Metal Factory. The CAS Hanwei brand couldn’t be in better manufacturing hands for the future. Please note: the katana, wakizashi or tanto’s sageo (cord) on the saya (scabbard) may not be wrapped as pictured. Sageo color may vary. Key Features: Performance XL Light Blade Geometry Traditional Construction Built for Martial Artists Specifications Overall: 40 1/2” Blade Length: 28 ½” Handle Length: 11” Weight: 2lb 9oz Point of Balance: 5 1/2" Width at Guard: 1 1/2" Width at Tip: 1 1/4" Thickness at Guard: 1/4" Thickness at Tip: 1/8" Sori: 3/4" Blade Steel: 1566 Hrc Edge: 60 Hrc Back: 40

The Naginata, famed weapon of the Sohei, or warrior monks, of medieval Japan was fearsome in the hands of a skilled combatant and is today of great importance in the martial arts field. This naginata kann be used for training and cutting and is a real weapon and not a decorative item. The Naginata is secured with 2 Mekugi in the bar. The handle of the Naginata ist oval shaped and about 4cm of height and 2,5 cm of wide. Details Total length: 180 cm Blade length: 54 cm Weight: 1.7 kg with saya Weight: 1.4 kg without saya This sword is handforged and folded and has a sharp blade.