C10

This is the exclusive accessory for selected Swords of Darksword Armory. It includes a scabbard with an interlaced sword belt. The scabbards are made with a poplar (wood) core and wrapped in vegetable tanned leather. The belts are woven into the leather. The leather is then hand stitched on the spine (back) of the scabbard. The belts will fit a waist of up to 127 cm. If you want to get this scabbard and belt for your Darksword Armory Sword, just add this product to your shopping cart. This accessory is available for the following swords: • 12th Century Medieval Sword [13467] • 14th Century Gothic Medieval Sword [40339] • 14th Century Medieval Sword [40358] • 14th Century Two Handed Sword [13466] • 15th Century Hand and a Half sword [40347] • 16th Century Two-Handed Sword [40336] • Hand and a half Medieval Knight [13892] • Celtic Anthropomorphic Medieval Sword [13999] • AOV Specter [13805] • Two handed Danish Sword [40352] • The Anduril [40344] • The WitchKing Fantasy Sword [40354] • The Longford [40349] • The Messer [40357] • The Norman Medieval Sword [13633] • The Ranger [40351] • The Sword of Portiers [40346] • The Spartan Sword [13943] • The Carpathian [13896] • The Nomad [13900] • The 2 Handed Norman [13891] • The black Prince [13894] • The Black Death Gothic Sword [40355] • The Waylander [40348] • The Sage [13901] • Limited Edition Excalibur Medieval Sword [40337] • Fantasy Scimitar [40356] • Fëanor’s Two Handed Sword [40359] • The Flames of the Angel Sword [13691] • 5 lobe Viking Medieval sword [40343] • Henry V Sword [13893] • Kurgan Medieval Sword [13940] • Migration Sword II [13895] • Mid 13th C. Sword [13682] • Ring Hilt Swiss Saber [40353] • Scottish Claymore [13918] • The Black Knight [13683] • The Guardian [13684] • The Medieval Knight [13458] • The Two Handed Gothic Sword [13463] • Type XII Medieval Sword [40340] Note: The price is only valid in connection with the purchase of the matching sword. If you only want to buy the scabbard, the price is 249 €.

In history and literature, a Black Knight is a mysterious warrior who hides their identity in order to disguise their motives and allegiance. The Darksword Armory Black Knight Sword is a nod to this literary and historical character, blending historical design with a fantasy flare. The straight, tempered, double-edged blade is based on those swords most often carried by the mounted knights of the medieval period. With full tang construction this sword is fully functional, and has been expertly forged and balanced to be an effective and deadly cutting weapon.More information on the Black Knight Sword, and on the historical and fictional characters that inspired it, can be found below. Blade: 5160 High Carbon Steel. Dual Tempered HRc 60 48-50 at the core Total length: 35″ Blade length: 28″ Blade width at base: 2″ Weight: 2.6 lbs

Honshu is known for its savage blend of tradition and innovation that forges a style and function in its modern, battle-ready weapons that’s beyond compare. The Naginata takes the traditional pole weapon design that was used by the Samurai class and elevates it into a modern battle weapon. It has an 18”, satin-finished 7Cr13 stainless steel blade, secured to the handle with heavy-duty screws and the guard is hefty. It has an injection-molded nylon handle with 30-percent fiber and the EDM surface texture provides a no-slip grip. The impressive naginata is 67” in overall length and it comes with a leather blade sheath with a snap strap closure. Details: Blade material: 7Cr13 stainless steel Total length: 170 cm Blade length: 45.72 cm

The Sword Maintenance Kit comes in a lightweight wooden storage box and includes all the essential tools needed for regular blade maintenance. The Uchiko powder ball contains fine polishing powder and is gently tapped along the blade to loosen old oil and surface impurities. The residue is then removed with the included soft microfiber cloth. Finally, apply a thin layer of clove oil to protect the blade against rust and corrosion. Regular maintenance helps prevent fingerprints, moisture damage, and other stains that can permanently affect the blade's finish. This maintenance kit is an essential accessory for collectors, Iaido practitioners, and sword enthusiasts alike. Clove Oil (Tsubaki or Clove Oil) The oil protects the blade from rust by forming a thin protective barrier against humidity and moisture in the air. As the protective film gradually evaporates over time, it is recommended to reapply the oil at least once a month. Uchiko Powder Ball The Uchiko powder ball contains fine polishing powder. By gently tapping both sides of the blade, it loosens old oil, fingerprints, and fine contaminants. When used together with the microfiber cloth, it helps restore a clean and polished blade surface. Microfiber Cloth The soft microfiber cloth is used to remove the Uchiko powder, oil residue, fingerprints, and other contaminants from the blade. It is also ideal for applying a thin, even coat of maintenance oil across the entire blade. Brass Mekugi Remover (Mekuginuki) The brass Mekuginuki is used to remove the bamboo retaining pins (Mekugi) from the sword handle, allowing the sword to be safely disassembled for maintenance. The brass hammer head can be unscrewed from the handle for use. Sword Maintenance InstructionsClean and maintain your sword after every use, whether it has been used for Iaido practice, Tameshigiri, or is simply displayed as part of your collection. 1. Remove Old Oil Use the microfiber cloth to wipe the blade thoroughly from the tip toward the handle, removing old oil and light surface contamination. 2. Apply Uchiko Powder Gently tap both sides of the blade with the Uchiko powder ball. The fine polishing powder helps lift old oil and dirt from the blade's surface. 3. Wipe the Blade Clean Carefully wipe away all Uchiko powder using the microfiber cloth. Repeat the process if necessary until the blade is completely clean. 4. Apply Fresh Oil Apply a small amount of clove oil to the microfiber cloth and spread it evenly over both sides of the blade, working from the tip toward the handle. Only a very thin protective film should remain on the blade. 5. Regular Maintenance Every 3–4 months, it is recommended to disassemble the sword and clean the tang (Nakago) in the same manner before applying a light coat of oil.

The PSK Plus XL Light Katana returns with all the features that made it a great katana but with some great improvements. Keeping with our promise for upgrades and advancement, the crisp and clean new look of the furniture (tsuba, fuchi, kashira, menuki) comes from the new tooling of this classic design that will remind you of the early originals. Still featuring the blade geometry of the differentially hardened and forged 1566 forge steel blade of the original. The CAS Hanwei Performance Series is a standard in the Japanese sword market. Being the go-to cutting katana for practitioners, our newly updated Performance Series katana continue to out rank the competition within their niche in the sword world with their consistency and reliability of quality and cutting execution. Highly imitated but never truly replicated, you can purchase with confidence in the CAS Hanwei brand swords with our over four decades of knowledge and expertise in manufacturing. The PSK Plus XL Light Katana was designed for quick-draws and multiple cuts on lighter targets. Keeping the furniture of the Practical Plus Katana and the upgraded natural components of the tsuka, the blade keeps the XL blade geometry but has bo-hi (grooves) on both sides of the blades which lighten the blade. With reduced weight, you can make multiple cuts with less energy on the same target. The 1566 steel and differentially hardened in the traditional manner, producing an edge hardness of HRC60 and spine hardness of HRC40. Cut with speed and accuracy with the PSK Plus XL Light Katana. Made formerly at the legendary Hanwei forge that closed in 2024, the famed artisans of Dalian at the Dragon King forge take the mantle of this legendary brand. Former protégé of Paul Chen and original engineer of the manufacturing of the Hanwei brand, Frenchie Jin knows these swords better than anyone else as he was a part or their original conception at the original Hanwei Metal Factory. The CAS Hanwei brand couldn’t be in better manufacturing hands for the future. Please note: the katana, wakizashi or tanto’s sageo (cord) on the saya (scabbard) may not be wrapped as pictured. Sageo color may vary. Key Features: Performance XL Light Blade Geometry Traditional Construction Built for Martial Artists Specifications Overall: 40 1/2” Blade Length: 28 ½” Handle Length: 11” Weight: 2lb 9oz Point of Balance: 5 1/2" Width at Guard: 1 1/2" Width at Tip: 1 1/4" Thickness at Guard: 1/4" Thickness at Tip: 1/8" Sori: 3/4" Blade Steel: 1566 Hrc Edge: 60 Hrc Back: 40

The Naginata, famed weapon of the Sohei, or warrior monks, of medieval Japan was fearsome in the hands of a skilled combatant and is today of great importance in the martial arts field. This naginata kann be used for training and cutting and is a real weapon and not a decorative item. The Naginata is secured with 2 Mekugi in the bar. The handle of the Naginata ist oval shaped and about 4cm of height and 2,5 cm of wide. Details Total length: 180 cm Blade length: 54 cm Weight: 1.7 kg with saya Weight: 1.4 kg without saya This sword is handforged and folded and has a sharp blade.

You must be able to rely on your equipment when far from civilization. You gear must work every time, and the Fallkniven A2 will always perform.The Fallkniven A2 is an extremely durable knife that will never let you down. The A2 is a knife that will stand up to incredible strain and forces. The reason for the A2’s remarkable performance is through the use of our professional-grade laminated stainless steel that combines an edge our famous VG10 steel sandwiched between two slabs of incredibly resilient and durable 420J2 steel. The combination of these metals creates a blade that maintains its edge extremely well while also being extremely strong.The Fallkniven A2 has a convex edge making is very effective for cutting, chopping and striking. A high quality strongly-sewn leather sheath is included. Whether on an expeditions, or living the tough outdoor life, or just a serious outdoorsman, for a life-long traveling companion, the Fallkniven A2 is the obvious choice. Blade steel: Lam. VG10 Hardness (HRC): 59 Sheath: Leather Weight (knife): 370 grams Handle material: Kraton Blade length: 20.2 cm Blade thickness: 6 mm Total length: 32.5 cm Coating: satin finish