Design wall mount for a sword - brown

CAS/Hanwei Sword Oil is specially formulated to provide corrosion protection for high-carbon steel blades and other edged weapons. Contains Petroleum Distillates. You will receive a bottle containing 4 oz of sword oil.

The maintainance kit has everything in it which you need for the must of care for your handmade sword. Comes with oil and powder. Oil is used to prevent the rust of the sword. Oil makes a film of the oil between the sword body and the air, and it prevents the oxidization of the sword body. Oil dries in about some time. Therefore, reprint it in the new oil once in a month. The thing which made a whetstone powder-shaped is being packed into the Uchiko. White powder appears from the Uchiko when a sword body is struck with the Uchiko. There are two use purposes. The Uchiko removes the old oil which sticks to the sword body. Furthermore, the Uchiko beautifies the surface of the sword. Nuguigami: The Nuguigami is not just regular paper, it is high quality thick japanese paper for cleaning swords. It is used for wiping out old oil and wiping out the Uchiko. The Mekuginuki is used to remove the Mekugi of the sword. The Mekuginuki can remove the Mekugi with the sharp part. In order to use the Mekuginuki for removing the Mekugi, the hammerhead part can be removed from the rest of the Mekuginuki. How to take care for your sword: How to take care of the sword after an Iaido practices or Tameshigiri will be explained with this topic. Take care of the sword after the practices always. If the care for the sword is neglected, a sword rusts in the sweat of the hand. Face an edge toward the top, and pull out a sword slowly from the sheath. Then, be careful not to damage a sheath. Hold the sword pulled out with your left hand. Then, remove old oil and dust from the sword with the Nuguigami. Put a Nuguigami on the Mune of the sword when wiping the sword, and wipe the sword toward the top from the bottom. Pat a sword body with the Uchiko. Powder equally on the both sides of the sword body. Then, wipe the white powder with the new Nuguigami which is different from the paper used some time ago. Repeat this handle, and remove the blurs of the oil completely. Apply new oil to the sword body, and put away a sword to the sheath. Put the oiling paper on the Mune of the sword when oiling the sword, and oil the sword toward the top from the bottom. Don't oil a sword in quantity very much. Oil equally the both sides of the sword body. If the care for the sword is finished, put a sword in the sword bag, and keep it. Keep a sword in the place where it dries in the shade. How to take care of the sword of this topic isn't perfect. Therefore, remove the hilt once in three months, and care for the tang (Nakago) and so on.

Sea waves are unique in the duality of their existence. They are fleeting yet eternal with their ebb and flow. The sound of sea waves can invoke a serene calmness and relaxation or fear and mortal dread when violently stirred. In medieval Japan the “katana” was symbol of peace, power and order but when in the wrong hands could be used for chaos, death and destruction. Our Sea Wave Katana and Wakizashi from Dragon King embody similar dualities in their existence.The placid blue saya conceals a rippling folded steel blade featuring bo-hi (groove) collared by a silver hibaki and notched seppa. The hada and hamon mirror the silver turbulent waves depicted tsuba, kashira and fuchi. Silver and gold menuki contrast against the dark blue tsuka handle wrap overlaid white same (ray skin). A blue and white sageo complete the saya accented by buffalo horn kurikata and koiguchi. The Sea Wave Katana & Wakizashi feature another duality between being formidable weapons and works of art. Key Features: 27 5/8" Forged and Folded Steel Blade Traditional Handle Construction Beautiful sea wave motify Overall: 40 3/8" Blade Length: 27 5/8" Handle Length: 11 1/2" Weight: 2 lbs 1 oz Sori: 7/8" Hrc Edge: 60 Hrc Back: 40 Specs will vary slightly from piece to piece. Please note: The matching Katana can be found under item number 11856.

The Nuguigami is not just regular paper, it is high quality thick japanese paper for cleaning swords. It is used for wiping out old oil and wiping out the Uchiko. With this Nuguigami you get 2 sheets of paper which are sized 25x40 cm.

The maintainance kit has everything in it which you need for the must of care for your handmade sword. Comes with oil and powder. Oil is used to prevent the rust of the sword. Oil makes a film of the oil between the sword body and the air, and it prevents the oxidization of the sword body. Oil dries in about some time. Therefore, reprint it in the new oil once in a month. The thing which made a whetstone powder-shaped is being packed into the Uchiko. White powder appears from the Uchiko when a sword body is struck with the Uchiko. There are two use purposes. The Uchiko removes the old oil which sticks to the sword body. Furthermore, the Uchiko beautifies the surface of the sword. Nuguigami: The Nuguigami is not just regular paper, it is high quality thick japanese paper for cleaning swords. It is used for wiping out old oil and wiping out the Uchiko. The Mekuginuki is used to remove the Mekugi of the sword. The Mekuginuki can remove the Mekugi with the sharp part. In order to use the Mekuginuki for removing the Mekugi, the hammerhead part can be removed from the rest of the Mekuginuki. How to take care for your sword: How to take care of the sword after an Iaido practices or Tameshigiri will be explained with this topic. Take care of the sword after the practices always. If the care for the sword is neglected, a sword rusts in the sweat of the hand. Face an edge toward the top, and pull out a sword slowly from the sheath. Then, be careful not to damage a sheath. Hold the sword pulled out with your left hand. Then, remove old oil and dust from the sword with the Nuguigami. Put a Nuguigami on the Mune of the sword when wiping the sword, and wipe the sword toward the top from the bottom. Pat a sword body with the Uchiko. Powder equally on the both sides of the sword body. Then, wipe the white powder with the new Nuguigami which is different from the paper used some time ago. Repeat this handle, and remove the blurs of the oil completely. Apply new oil to the sword body, and put away a sword to the sheath. Put the oiling paper on the Mune of the sword when oiling the sword, and oil the sword toward the top from the bottom. Don't oil a sword in quantity very much. Oil equally the both sides of the sword body. If the care for the sword is finished, put a sword in the sword bag, and keep it. Keep a sword in the place where it dries in the shade. How to take care of the sword of this topic isn't perfect. Therefore, remove the hilt once in three months, and care for the tang (Nakago) and so on.The mekuginuki is not included in this cleaning set!

The Witcher (Polish Wiedźmin) is a computer game of the Polish development studio CD Projekt RED. It is based on a book series by the Polish fantasy writer Andrzej Sapkowski about the witcher and monster hunter Geralt von Riva. The main character of the narrative is the scrawny wizard Geralt von Riva, who is a professional monster hunter. His hallmarks are his long white hair and two swords on his back, one of silver and one of steel. The Silver Sword serves as a weapon against all sorts of monsters, since most of the monsters that are encountered are very sensitive to silver, while the Steel Sword is used to fight human opponents. This is the handforged silver sword made of 1055 carbon steel of the witcher Geralt von Riva. Delivery with scabbard. Details: Overall length: 117.5 cm Overall weight: 1.68 kg Blade length: 90.5 cm Blade width: 4.7 cm Blade thickness: 4 mm Handle length: 19 cm Guard length: 18cm Handle material: hard wooden wrapped with black wax cord Scabbard length: 98cm

This is a Thaitsuki sword and we believe in quality over quantity. Thaitsuki Nihonto swords are hand-made, fully functional, and "battle ready" katanas. They are best suited for practice in all sword arts, completion cutting, and collecting. The Japanese Katanas, hand-made by Thaitsuki Nihonto, are of the highest quality, traditionally made and perfected for over 400 years. Thaitsuki Nihonto has been producing Japanese swords for professional collectors and practitioners of Iaido, Iaijutsu, and Kenjutsu for over 400 years! The blade of the Tora Katana is handmade and forged from special high carbon Japanese steel (DC53) making a strong, flexible blade with bo-hi (groove). With 2 different HRC grades on the back (40) and on the edge (60) the blade is very strong. The blade is about 7mm wide on the habaki and about 5,5mm on the chu kissaki. The tsuka (handle) is covered in black same (ray skin) and the Tsuka Ito (handle wrap) is best japanese dark brown 10mm wide cotton. The brass tsuba shows a tora motif. The koiguchi is made from real buffalo horn and the handmade saya was made from dried poplar wood. The kurigata is made from wood and has 2 92,5% silver shitodome. At the end of the saya is a kojiri made from real buffalo horn mounted which prevents the saya from breaking when hit hard on the floor, eg when training iaido. Fuchi and Kashira show a tiger with bamboo leaves and are detailed in gold. The menuki are made from 92,5% silver and show a pair of japanese tigers. The Tora Katana is a fully functional Japanese katana and not a replica, it is considered a weapon and it is extremely sharp. This sword can easily sever a 7" thick bamboo with single stroke. The Tora Katana can be completely disassembled for full maintenance. This sword can also be made dull so that you can use it for practice, like in Iaido ! Details : Overall length: 104 cm with scabbard: 109 cm Blade: 74 cm Handle: 26.5 cm Weight: 1.20 kg with scabbard: 1.6 kg Tsuka Ito: Dark brown cotton Ha (edge) 60-63 HRC Habuchi (temper line) 43-46 HRC Ji bis Mune (edge to back of the blade) 33-36 HRC