Hauberk- Full Sleeves Chainmail Shirt

€399.00*

Item is normally available in about 6-8 weeks.

Product number: 70390

You get 399 bonus points for this order

Product information "Hauberk- Full Sleeves Chainmail Shirt"

Hauberk isﾠa tunic of chain mail worn as defensive armor from the 12th to the 14th century- thousands of iron rings interlinked together to create a hauberk chainmail . Hauberks were a full sleeved mail shirt that extended to the knees.

Ring Type Round Wire Round Riveted Chainmail
Ring Diameter 8mm
Thickness 16Gauge
Chest Size 152 cms (Shall fit a person with chest circumference upto 138 cms perfectly)
Sleeve Length from Shoulder 45cm
Overall Length from Shoulder 91cm
Weight 21kg approx

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Be the first to share your insights.

Manufacturerinformation (GPSR)

HISTORICAL REPRODUCTIONS GmbH
Industriestraße. 4
56581 Kurtscheid

0221/42337379
content@gdfb.com

Customers also bought

Aventail plain edge straight with Leather Stiched

An aventail is a mail curtain that was attached to the lower edge of a helmet. This protected the neck and the uppper shoulder area depending on the length of the mail. Often times there was padding worn underneath the mail as is seen on various Medieval effigies.Plain edge Straight - Flat Ring Wedge Rivets- Stiched on Leather - Ready to be attached to Bascinets. Our aventail is totally made by hand. Each ring is first flattened and then they are interlinked in small sections. These small sections are first riveted with wedge rivets before these sections are joined together to make an aventail. Each aventail is then checked for fitting with a bascinet before it gets stitched to a leather by hand. Ring Type Round Wire Round Riveted Chainmail Ring Diameter 8mm Thickness 18Gauge Top Circumference 82cm Height 31cm Bottom Circumference 232cm Weight 3.5kg approx

€72.90*

Dieser Artikel hat eine Lieferfrist von ca. 6-8 Wochen.

Plier for Butted Chainmail

Chainmail Plier made from Mild Steel for weaving rings in the chainmail.

€9.98*

Dieser Artikel hat eine Lieferfrist von ca. 6-8 Wochen.

Gothic battle-ready shield, large

Fully battle-ready shield made of high quality hardened steel. With a size of approx. 50 cm x 50 cm it weights approx. 3.5 kg. The shield can be easily painted by using synthetic iron paint, or even car paint. But it is needed to remove the grease first! Details: Material: Hardened steel Width: approx. 53 cm Height: approx. 59 cm Weight: approx. 3.94 kg

€239.00*

Dieser Artikel hat eine Lieferfrist von ca. 6-8 Wochen.

Great helmet C.1300, Size XL

This helmet is based off of the great helmet of Sir Richard Pembridge, who died in 1375. The origin is now in the collection of the tiol Museum of Scotland, Edinburgh. The crosses at the bottom of the helmet in the front were used as attachment points for chains. These helped to prevent the helmet from being dislodged if it was struck by a lance. This was a common style in the 14th century. Another well known example is the helmet of Edward the Black Prince, who faought alongside Sir Richard at the battle of Poiters, France, in 1356. It was worn over a cerveliere' and mail coif. This item is supplied with a well padded linen liner sewn into the inside of the helmet. It is constructed from 2mm steel. Size Circumference with Liner M 61 cm L 63 cm XL 65 cm

€129.00*

Dieser Artikel hat eine Lieferfrist von ca. 6-8 Wochen.

Crusader Upper Leg Padding with Steel Protection, Black, Size L

Gamboised cuisses are the equivalent of a gambeson for the thigh. Suitable for impressions from the 11th to the 14th century. These are padded with wool blankets vertically quilted between layers of 100% cotton canvas. A steel poleyn is stitched on to the cuisse, which helps to protect the knee. Supplied with a cotton cord tipped with brass aiglets. Size Length M 37,5 cm L 38,75 cm XL 40 cm XXL 41,25 cm

€49.90*

Dieser Artikel hat eine Lieferfrist von ca. 6-8 Wochen.

Norman Sword

The new Norman Sword from Cold Steel with an overall length of approx. 96 cm is made from 1055 Carbon steel. A Steel Scabbard with Brass Fittings is within the scope of supply. The Norman lust for battle and ravenous desire for land and treasure can, like their famous sword be undoubtedly traced to their Viking forefathers who wrenched their homeland in north-western France from the hands of Charles the Simple in the Treaty of Saint-Clair-sur-Epte in 911 AD. Never satisfied with their lot, it wasn't long before they once again took up their broad, double- edged swords and set sail across the English Channel to conquer Britain most famously, at the battle of Hastings in 1066 AD. Now Cold Steel is pleased to offer you the battle ready version of this famous sword. Like the originals they have studied, and the trainers Cold Steel´s President Lynn C Thompson spars with, it offers a long wide blade with fully sharpened edges and a very useful point. To insure it's light enough to be easily wielded with one hand we have also added a single broad fuller in the center of the blade that serves to reduce weight, improve balance and add the stiffness needed to withstand heavy blows. The hilt of the Norman Sword is also reminiscent of many surviving originals with upturned, spatulated quillions, leather-over-wood grip and a modified "cocked hat" pommel. This pommel shape was specially chosen because it allows more room for the hand, while counter balancing the blade and serving as a weapon in its own right. Details: Weight: approx. 1015 g Overall Length: approx. 95 cm Blade Length: approx. 76 cm Blade Material: 1055 Carbon Handle Length: approx. 18.5 cm Scabbard: Leather/Wood Scabbard with Steel Fittings

€419.01*

Im Außenlager, Langstreckenversand - in 12-14 Tagen bei Dir zu Hause

Riveting tool for Round Rivets

This steel tool is intended for riveting loose rivet chainmail links together. Its pincer-like head has indentations by which to insert the two links and their corresponding rivet.ﾠ

€19.90*

Dieser Artikel hat eine Lieferfrist von ca. 6-8 Wochen.

Round Ring Riveted 9mm

Round ring, round rivet , fully riveted , 9mm ID.

€104.90*

Dieser Artikel hat eine Lieferfrist von ca. 6-8 Wochen.