PayPal is once again available as a payment method

Handmade Odachi Sword

€129.00*

this item is in stock

ATTENTION: Proof of age required!
No sale to persons under 18 years!

Product number: 11592
You get 129 bonus points for this order
Product information "Handmade Odachi Sword"
More than just an ordinary Samurai Sword!

This piece stretches an alarming 175 cm and is equipped with a 124.5 cm long 1050 steel heat tempered blade. The blade is sharp and fully functional.

The cord wrapped handle is also extra long for two-hand action.

Includes wooden sheath with cord wrap.

Special Features:
* Huge, hand forged 1050 steel blade
* Full length Hi
* Rectangular tsuba with stone finish
* Cotton and rayskin imitation wrapped tsuka (double pegged)
* Wood saya with black speckled finish
* Fully Functional

Details:
Total length: 173cm
Length of blade: 121cm
Length handle: 44cm
Weight: 1.68kg
Wide blade (at Tsuba): 3,1cm
Thick blade (at Tsuba): 1.3cm
Thick blade (before Habaki): 0.9cm
Focus: 28cm (from Habaki)
Blade Material: 1050 steel
Handle Material: Cord wrapped wood

14 of 14 reviews

5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


October 1, 2024 07:02

Wunderschönes Schwert

ich hätte nicht gedacht, dass ich für diesen Preis ein so schönes Odachi bekommen würde. Der erste Eindruck war: lang !! Wenn man nur normale Schwerter gewohnt ist, dann ist das überwältigend. Die Klinge ist flexibel und im vorderen Bereich auch scharf. Der Griff hat für diese Schwertlänge genau die richtigen Proportionen, nicht zu lang und nicht zu kurz. Das Schwert lässt sich so wunderbar führen. Was auf den Produktbildern nicht rauskommt ist: das Odachi hat auch eine sehr angenehme Biegung. Auf den Bildern sieht es ziemlich grade aus. Dieses Schwert ist auf jeden Fall zu empfehlen.

October 21, 2020 18:16

Kaufempfehlung

Ich war richtig begeistert als ich das Schwert in Augenschein nahm, da ich für ein 130 euro Odachi nicht viel erwartet hätte. Die Klinge ist für diesen Preis schärfer geschliffen als erwartet und die Verarbeitung passt gut. Ist ein toller Hingucker und zum Schneiden tuts auch :)

August 2, 2016 09:43

Richtig schönes Schwert Die Klinge ist gut verarbeitet und scharf. einziges Manko: die Bambus-stifte, die das Schwert mit dem Griff fixieren sind zu lang, kann aber mit ein paar kleinen Handgriffen behoben werden.

February 1, 2016 19:00

I was somewhat skeptic when ordering this sword, because it seemed a little bit too cheap to be handmade in this size. But after I got it, I was pleasantly surprised. The size and thickness of the blade is supreme, it convinces you that it really is meant to be more than just decoration. I tested it on tatami targets and after I resharpened the blade a bit it went straight through them. You can cut up to 6-7 standard tatami in a single swing easily - take care!

March 9, 2015 23:49

Schöhnes schwert ! Nach etwas üben lässt es sich auch gut führen. die meiste zeit hängt es bei mir an der wand, doch trotz unregelmäßiger pflege, sind auchnach fast einem jahr ohne plfege keine rostigen stellen zu finden. auf jeden fall den preis wert

September 23, 2013 10:53

Ein handgeschmiedetes Odachi für 119€. Ich war eher skeptisch anfangs, aber als ich es dann sah lösten sich diese gedanken in Rauch auf. Es ist fantastisch. In Natura sieht man erstmal wie lang diese Klinge wirklich ist. Es erfordert ein wenig Geschick und Übung die Klinge richtig zu ziehen, aber das nimmt man doch sehr gerne für solch eine Waffe in kauf.

July 2, 2013 19:10

Sehr schönes Stück! Es ist jedoch sehr mühsam, es aus der Saya zu ziehen. Wer aber diese 'Herausforderung' gemeistert hat, darf sich am schönen Anblick des Odachis erfreuen, das ein interessantes Gefühl beim Halten gibt. Das liegt höchstwahrscheinlich an der Länge, und dieses Schwert ist es im wahrsten Sinne des Wortes. Das Kurigata an der Saya ist leider leicht abgebrochen, und um es wieder zu fixieren, musste ich das Sageo (Das Band an der Saya) lösen, aber es dürfte dennoch schaffbar zu binden sein.

April 11, 2013 13:07

Das geilste teil das ich je bestellt habe ein langes beeindruckendes teil gute Verarbeitung für den Preis top.

November 17, 2012 16:48

Ein sehr gelungenes Schwert, sieht super aus und ist einfach nur LANG! Mann muss nur ein wenig beim einschieben in die Schwertscheide achten das es richtig hineingeschoben wird ansonsten kann das Schwert stecken bleiben und ist sehr schwer wieder herauszubekommen (ist mir passiert musste mit drei Leuten zusammen ziehn :) ) Fazit: Für den Preis bekommt man ein grandioses Schwert!

September 26, 2012 23:58

Gutes schwert, was nich dabeistand, ist das, dass swords and more logo auf der klinge zu sehen ist, da es aber eher klein und dezent ist, ist das nicht sehr störend, Ansonsten hammer schwert, Schärfe war zwar nich der hammer, aber doch ziemlich gut, für mich das geld wert!

Manufacturerinformation (GPSR)

Swords and more GmbH
Liebigstrasse 2-20
22113 Hamburg
Deutschland

0049 40 36164963
info@swords-and-more.com

Customers also bought

Akito
Real functional sword. Suitable not only for kata (forms of exercise) or Iaito (drawing exercises), but also for Temeshigiri (cut tests). In order to perform cut tests, it requires a very high quality, sharp and cut containing blade. The blade of the Akito is made of clay hardened 1045 carbon steel with real hamon (temper line). The overall design is very robust, in order to avoid injury. Thus the blade is continuous almost to the end of the handle and is secured by two Mekugis. A beautifully lacquered wooden sheath with eye (Kurigata and Shito-Dome) is within the scope of supply. Details: Overall Length: approx. 102 cm Blade Length: approx. 72.5 cm Blade Thickness: approx. 7.6 mm Blade Material: Carbon steel Weight: approx. 863 g

€164.95*

this item is in stock

Horn of Gondor
The Horn of Gondor was an heirloom of the Stewards of Gondor, fashioned by Vorondil from a horn of the Kine of Araw, and passed to his descendants until its destruction at the death of Boromir. Tipped with silver and inscribed with ancient characters, it was said to be audible at any place in Gondor when winded.The wall mount and horn are made of resin, there is a leather strap included to hang the horn from the wall mount. The horn has holes at both ends so should be functional (like a trumpet, not just to blow into it). The horn is 45,72 long cm from end to end and the wall plaque is 19 cm high. Details: Horn Length: 45,72 cm Wall Plaque: 19 cm

€289.00*

this item is in stock

Sword of Thranduil
The sword of the Elvenking was one of two twin swords crafted for Thranduil by the finest smiths of the Woodland Realm. The blade and flowing hilt are forged with engraved vine and leaf symbols representing the forests of the Greenwood, all forged from a single piece of silver Elven steel. This replica features a stainless steel blade and cast metal hilt with authentic detailing to precisely match the movie prop. It is presented with a wood wall display featuring graphic motif of Thranduil.

€369.00*

this item is in stock

Towton Schwert - Signature Series
Introducing the Signature Series by Windlass! Some of our all-time favorites, reissued by Windlass Steelcrafts® with several upgrades! The blade has improved distal taper, making the sword livelier and quicker. The scabbard now has a wooden core underneath the leather exterior. The grip features leather that is dimpled using a historically authentic "wet-wrap" process, during which fine cord is tightly wrapped around a wet leather grip. When it's dry, the cord is removed and the leather is left attractively indented and provides improved texture and grip. In the winter of 1461, the yet uncrowned Edward IV marched a large Yorkist (the white rose of the “War Of The Roses”) army northward to attack the Lancastrian forces (the red rose) of the legitimate King Henry VI. Although they launched an attack on the Lancastrians’ strong position on an uphill slope at Towton, the Yorkist forces were aided by a blinding snow storm at their backs; the Yorkist archers were able to kill at a range that the Lancastrian arrows were unable to match. The 20,000 royalists charged downhill into their tormentors. The next six hours witnessed thousands fall in one of the bloodiest battles ever to take place on English soil. We have named this sword for that fearsome battle. The blade tapers to an excellent stabbing point and is fullered for most of its length for lightning speed. On foot it could be used with two hands, delivering terrible cuts and thrusts. From horseback its perfect balance and weight still allowed for one-hand blows of equal devastation. Truly a joy to hold, the long graceful pommel, wood and leather grip are nicely complimented by the elegant curves of the crossguard. Flexible and well-tempered, this is sure to become one of your new favorites. Scabbard included. SPECIFICATIONS: Overall: 44-1/2" Blade Length: 36" Blade Width: 2" Blade Thickness: 3/16" Blade Distal Taper: 1/16” Point of Balance: 3-3/4” from guard Wt: 2 lbs/10 oz Blade: 1075 High Carbon Steel

Variants from €359.00*
€388.00*

Im Außenlager - in 5-7 Tagen bei Dir zu Hause

Honshu Historic Forge 15th Century Bastard Sword
Experience the power and elegance of the Honshu Historic Forge 15th Century Bastard Sword. Crafted with precision and attention to detail, this sword transports you back to the noble era of knights and chivalry. Forged from high-quality 1065 carbon steel, the double-edged blade showcases exceptional strength and resilience. The blade is expertly sharpened, making it perfect for precise cutting and slicing tasks. With a Rockwell Hardness of 47-52, this sword is tempered for optimal functionality, allowing it to withstand intense battles and training sessions. Its unique ability to bend and return true makes it a reliable companion in combat. The 35 5/8" long blade and an overall length of 44 7/8" provide a perfect balance between reach and maneuverability. Whether you're engaging in historical reenactments, honing your martial arts skills, or adding an impressive centerpiece to your collection, this sword performs with precision and grace. The hardwood handle, meticulously wrapped in black leather, offers a comfortable and secure grip, enabling precise control and handling during combat or display. The included hardwood scabbard, also wrapped in leather, not only protects the blade but adds an extra touch of authenticity to this exceptional sword. Enthusiasts of historical weaponry, martial arts practitioners, collectors, and anyone captivated by the allure of swords will find the Honshu Historic Forge 15th Century Bastard Sword a captivating addition to their collection. Embrace the legacy of the past and wield this remarkable sword that blends artistry, craftsmanship, and functionality into a timeless masterpiece. With its expertly sharpened blade, it is ready for cutting tasks and offers a truly immersive experience. Details: Overall Length: 44 7/8" Blade Length: 35 5/8" Blade Material: 1065 carbon steel Weight: 2.35lbs

€349.00*

this item is in stock

Masterpiece Collection Rambo First Blood PartII Standard Edition
We are proud to present the Rambo knives Masterpiece Collection™, the finest Officially Licensed Rambo knives ever produced. No detail has been spared to make these knives the most accurate and highest quality licensed Rambo knives ever made. Featured prominently in Rambo: First Blood Part II, this is an exact reproduction of the knife used by Sylvester Stallone in this classic action movie. Each knife measures 15½" in overall length and features a top quality 420 stainless steel blade with slotted saw teeth, a hollow handle with survival kit, aluminum butt cap with precision compass and a double screwdriver guard. • Features a two-piece Diamond Sharpening Rod in a leather pouch on the front of the sheath as in the movie. • Survival Kit has a Survival Kit Silencer™, to prevent noise caused by the Survival Kit moving in the handle of the knife. • The knife comes in high quality packaging with a custom EVA foam insert to prevent any movement of the knife in transit. This museum quality replica has been hand crafted with pride from the finest materials available and comes complete with a high quality buffalo hide leather sheath. Specifications: • 15½" overall length. • Top quality 420 stainless steel ¼" thick blade with center slotted saw teeth and matte black finish. • Hollow handle wrapped in heavy O.D. black nylon cord with waterproof O ring and survival kit with Survival Kit Silencer™. • Stainless steel guard with lashing holes. • Non-magnetic aluminum butt-cap with precision compass and lanyard hole. • Phillips and standard screwdriver points. • High quality top grain genuine Buffalo hide leather sheath with leg tie. • Two-piece Diamond Sharpening Rod

€209.00*

this item is in stock