10% discount on all Demon Slayer and Elden Ring products

Brocade sleeve for katana

€20.90*

Item is in field warehouse.

Product number: 91204
You get 21 bonus points for this order
Product information "Brocade sleeve for katana"
A brocade case for a katana.
Length 110 cm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Manufacturerinformation (GPSR)

Haller Stahlwarenhaus GmbH
Am Gartennest 1
74544 Michelbach/Bilz

0791 47003
info@haller-stahlwaren.de

Customers also bought

Katana
This katana´s blade is made of type 420 stainless steel and has been tempered and grinded. A scabbard with a black finish and a silver dragon is included as an eye-catcher. Details: Total length: 96cm Blade length: 72cm Handle length: 23.5 cm

€119.90*

item is available on 30.04.2026 . preorder now

John Lee Kashira and Fuchi, plain
Imori Fuchi & Kashira, plain.

€11.90*

Im Außenlager - in 5-7 Tagen bei Dir zu Hause

Replacement oil for the cleaning set
It is very important that the Katana is cleaned after use by Laido or Tameshigiri. This is a replacement oil for the cleaning set.

€3.90*

Im Außenlager - in 5-7 Tagen bei Dir zu Hause

Sageo from chemical fibre 220 cm for longsword - Shigeuchi Sty
This is Sageo made from chemical fibre and made in Shigeuchi Style. Length 220 cm for a longsword. You can choose from following colors : One color : black, brown, blue, dark blue, purple, wine, green, gold, beige, white, grey. Two colors : Black/Gold, Black/White, Black/Blue, Black/Brown, Black/Red, Black/Green, Black/Blue, Brown/Gold, Brown/White, Brown/Blue, Brown/Green, Blue/Black, Blue/White, Blue/Green, Blue/Gold, Gold/Brown, Gold/Black, Green/Gold, Green/Brown, Green/Blue, Purple/White,Wine/Black,Wine/White. Just put the color or color combination you want into the comment field when placing your order.

€15.01*

Dieser Artikel hat eine Lieferfrist von ca. 10-14 Tagen.

Raptor Shinogi Zukuri
The Raptor series, our new line of cutting katanas, has been designed for the cutting practitioner who does not necessarily have access to mats but who wishes to practice and perfect his cutting technique. The blades are forged in 5160 high-carbon steel and specially heat treated to produce very high resilience and greater tolerance of misdirected cuts than a conventional differentially tempered blade. The edge geometry is configured to facilitate the cutting of both soft and semi-hard materials without chipping, allowing the cutter a wide choice of targets. The Raptor Shinogi-Zukuri blade, which has evolved as the most common Japanese katana blade design, provides both speed and cutting power. Featuring a distinct yokote, such blades were originally produced after the Heian period, around 987 AD. Details: Overall length: 42.3" Blade length: 28" Handle length: 11" Weight: 2lb 10oz 5160 high-carbon steel Details will vary slightly from piece to piece.

€629.00*

Dieser Artikel hat eine Lieferfrist von ca. 4-6 Wochen.

Citadel
Bamboo Citadel Custom Katana - Limited Edition III
Citadel's swords and knives are completely hand-made one off customs made entirely in their small shop in Phnom Penh, Cambodia. We've asked them to make for us a few in the same style, but made in the same way as their custom swords. Crafted individually from start to finish, each one is of course a bit unique in it's own way. Limited to 100 swords, each is signed by the smith on the nakago with the sword number and comes with a matching certificate. Click here to read about how these exceptional samurai swords are made.This rendition of the classical bamboo themed katana is a light and fast sword. Hand forged from imported European DNH7 high carbon steel the differentially hardened blade features a "bo-hi" or fuller to lighten and balance the blade without sacrificing strength. This is an extremely collectible and capable sword.The tsuba is hand cut and engraved from pure iron. The "nanako" or stippled pattern on the tsuba is accomplished by hand, quite a feat of patience with a stunning result. The tsuba also features "seki-gane", metal inserts at the top and bottom of the hole for the blade to slip through. These are of a softer metal (copper) than the iron of the tsuba and allow easier shaping of the hole to perfectly fit the tsuba to the blade. Over time if this fit becomes loose or the tsuba is fitted to another blade the seki-gane may be adjusted easily to tighten it back up. This is a small detail usually only found on hand-made Japanese tsuba and is indicative of the level of care and craftsmanship given to these swords by Citadel.The "tsuka" or handle and "saya" or scabbard are hand carved to fit each individual blade ensuring a proper fit. The handle is wrapped in genuine imported silk form Japan and tightly wrapped around the full same-gawa or ray skin wrap around the wooden core. The saya is lacquered in black to a nice semi-gloss finish with a ray skin wrap near the mouth of the saya to strengthen this area.In hand this sword feels as if it is a natural extension to your arm, a truly exceptional experience.Collect the set; a samurai wore two swords, the matching short sword or wakizashi is also available to complete your daisho collection. Key Features: Handmade by skilled artisans Hand carved fittings of pure iron Limited Edition of 100 SPECIFICATIONS Overall: 40 3/8" Blade Length: 27 3/4" Handle Length: 11" Weight: 2lb 3oz Point of Balance: 4 3/4" Thickness at Guard: .25" Thickness at Tip: .2" Sori: 3/4" Blade Steel: DNH7 Specs will vary slightly from piece to piece.

€3,359.00*

Im Außenlager, Langstreckenversand - in 12-14 Tagen bei Dir zu Hause

Citadel
Lotus Citadel Katana - Limited Edition II
Citadel's swords and knives are completely hand-made one off customs made entirely in their small shop in Phnom Penh, Cambodia. We've asked them to make for us a few in the same style, but made in the same way as their custom swords. Crafted individually from start to finish, each one is of course a bit unique in it's own way. Limited to just 100 swords, each is signed by the smith on the nakago with the sword number and comes with a matching certificate.This katana is made in the same manner as the more costly Citadel katana (see Ocean and Bamboo) but with a focus on cutting practice this sword's fittings have been simplified to their purest form. The blade is solid, with no bo-hi or fuller to provide a slightly higher weight and forward balance. However Citadel sharply tapers the blade geometry from the shinogi or central ridge to the mune or back of the blade. This allows for a thicker blade with more niku or apple-seed geometry behind the edge while maintaining proper balance. This means the robust blade can stand up to traditional target cutting of harder targets, usually fresh green bamboo, without worry of chipping the edge.The fittings are hand cut and shaped from pure iron, an extremely tough material that takes a deep black patina and needs minimal maintenance. Iron will bend under tremendous shock instead of break, a feature any samurai would appreciate. The Lotus design of the tsuba is in an older, simpler style (kyo sukashi, maru gata) that reflects the nature of the sword.The tsuka or handle and scabbard are hand carved to fit each individual sword ensuring a proper fit. The ito or handle wrap is of black natural silk imported from Japan. It is tightly wrapped around the full same-gawa or ray skin wrap with the proper hishigami or paper triangles present to ensure a long life of use. The saya is lacquered to a semi-gloss finish with buffalo horn mounts (koiguchi, kurikata and kojiri).This is an exceptional sword for practitioners of tameshigiri that want a unique sword.Collect the set; a samurai wore two swords, the matching Wakizashi is also available to complete your collection. Key Features: Limited to 100 pieces Completely hand made High end fit and finish SPECIFICATIONS Overall: 40" Blade Length: 27 1/2" Handle Length: 11" Weight: 2lb 6oz Point of Balance: 5 3/4" Thickness at Guard: .25" Thickness at Tip: .22" Sori: 3/4" Blade Steel: DNH7 Specs will vary slightly from piece to piece.

€2,639.00*

Dieser Artikel hat eine Lieferfrist von ca. 4-6 Wochen.