10% discount on all Demon Slayer and Elden Ring products

Spare parts kit AR-6 Stinger II

€22.50*

Item is in field warehouse, long distance shipping.

Product number: 94999
You get 23 bonus points for this order
Product information "Spare parts kit AR-6 Stinger II"
In this kit you will find a wide range of spare parts for your AR-6 Stinger II to get it ready to shoot again in no time.

From various screws to washers and needed tools to replacement fibers, there’s a lot included.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Manufacturerinformation (GPSR)

STEAMBOW GMBH
Bäckerstraße 1
2433 Margarethen am Moos
Österreich

support@steambow.com
+43 2230 29 974 20

Customers also bought

Stinger Arrow target
This high quality target is made in Austria by Steambow especially for the Stinger repeating crossbows.On the front there are 9 small targets that are ideal for the AR-6 Stinger. There’s a large target on the reverse. So either side of this target can be used according to personal preference.This mat can be shot at with the field tip arrows, hunting broadheads and Bodkin tipped arrows without any problems.Also, thanks to the high quality of this target, the arrows don’t penetrate too far so as not to damage the vanes and making them easier to pull out. Weight: 3.2 kg Dimensions: 50 x 50 x 9 cm The target is made from 100% recycled plastic.

€59.90*

this item is in stock

Stinger Bodkin arrows – Set of 6 pcs.
Our Bodkin arrows for the AR-6 Stinger were designed for maximum penetration.With a weight of 10.5 g / 162 grains per arrow and a hardened hollow ground steel tip these arrows are extremely effective.The elegant, all black design with the Steambow engraving perfectly round these arrows off. Contents: 6 Bodkin arrows with hardened steel tip

€24.90*

this item is in stock

Stinger Target arrows – Set of 10 pcs.
High-end target arrows for the AR-6 Stinger. Blue anodized for distinguishability inside the magazine.The arrows are completely made of aluminum and have perfect balance. The tip is riveted and additionally glued into the shaft.The vanes are made from rubber and allow great aerodynamics. The vanes can however fall of when hitting too soft targets. These can then be glued onto the shaft again with model glue (such as “UHU hart”).This pack contains 10 target arrows.ATTENTION: Never use bent arrows in your AR-6 stinger. This can trigger failed shots. Such “dry shots” can damage the string and the limb.

€16.90*

item is available on 15.05.2026 . preorder now

AR-6 Stinger II – Tuning Limb “PRO” (90 lbs.)
Our new AR-6 Stinger II “PRO” fibreglass / carbon fibre limb delivers significantly more kinetic energy than the standard AR-6 Stinger II limb.Note: The draw weight, in this case 90 lbs, is not a reliable indicator of the performance of a crossbow!Many factors, such as the power stroke, the efficiency of the bow, the rebound characteristics of the bow, the weight of the arrow, the weight of the string and much more have an impact on the energy that the arrow receives when it is launched.Depending on how heavy the arrow is and how many times the string has been twisted (this shortens the string), this bow on the AR-6 Stinger II delivers between 18 and 21 joules (13.3 – 15.5 ft-lbs) of kinetic energy.Important: The new limbs of the AR-6 Stinger II do not fit the previous versions of the AR-6 Stinger.Also feel free to check out our videos on the following Stinger topics:Included in the delivery: 1 Fibreglass/Carbon fibre limb labelled “AR-6 Stinger II PRO” 1 AR-6 Stinger II string 2 limb end caps 1 stringing aid The limb is compatible with all replacement strings for the AR-6 Stinger I + II.

€45.90*

item is available on 15.06.2026 . preorder now

Stinger Red Dot Sight
High quality red dot sight for the AR-6 stinger.Made entirely of aluminum. Exchangeable reticle (optional: “crosshair” for precise shots, “circle” for quick target acquisition or a “point” to cover little of the target) as well as changeable color and brightness of the reticle. With either red or green you have the best possible contrast depending on the environment. The brightness setting is especially necessary in poor light so as not to outshine the target or not to impair night vision.The visor can be adjusted with repeat accuracy and offers a wide range of adjustment. With the supplied Allen key, the adjustment (and also the assembly) is done in a flash.Batteries are included and have a long lifespan.Color: Black

€32.90*

item is available on 15.05.2026 . preorder now

Tactical arrow quiver for AR-6 Stinger II
With the new tactical arrow quiver, the 5-arrow speed loader for the AR-6 Stinger II can be easily carried, stored and safely transported.The arrow quiver is compatible with the MOLLE system and can therefore be securely attached to many rucksacks, vests or similar items of clothing. The speedloader can also be worn at different angles on a belt or waistband. With the included Picatinny bracket, you can also attach the set of arrows directly to the Stinger II, so you always have extra arrows to hand.

€17.50*

Dieser Artikel hat eine Lieferfrist von ca. 10-12 Wochen.

AR-6 Series replacement string – Black/Orange
Black/Orange replacement string for all limb types of the AR-6 series (AR-6 Stinger I and AR-6 Stinger II).Contents:1 Black/Orange colored replacement string

€12.90*

Im Außenlager, Langstreckenversand - in 12-14 Tagen bei Dir zu Hause

Steambow AR-6 Stinger II Tactical
The new AR-6 Stinger II is here!The revolution of tactical crossbows:Everything that made the Stinger so popular, now even better.With a completely redesigned base, new limb technology, a fiber optic front sight and an adjustable butt stock.Our new crossbow was specifially designed for the repeating mechanism of the Stinger.The longer Picatinny rail allows a flexible positioning of the vertical foregrip.In combination with the butt stock we elevated the cocking of the Stinger to a new level.The all new fiber optic fron sight also accelerates aiming and eases it.Never before was it possible to shoot 6 arrows this quick and precise!Both the crossbow body as well as the magazine are made from high quality polymer and the whole crossbow stands out as very durable and lightweight.The new limbs are made from both carbon fiber as well as glass fiber and improve the power of the AR-6 Stinger II considerably! Contents: 1 Steambow AR-6 Stinger II Tactical 1 vertical fore grip 1 AR-15 butt stock (incl. commercial spec buffer tube) 6 training arrows 2 strings 1 cocking rope 1 user manual This package does not include a laser sight! The laser is sold seperately in our shop! Unboxing and assembling of the AR-6 Stinger II Tactical: Installing the string on the AR-6 Stinger II: Correct and smooth decocking of the string: Weight: 1,16 kg / 2.6 lbs Length: 55.6-63.2 cm (because of the adjustable butt stock) Height: 21.9 cm (incl. vertical foregrip) Width: 44,5 cm / 17.5 in

€299.00*

item is available on 15.05.2026 . preorder now