The Undercover CIA Stinger Knife And Sheath was designed to be that easy-to-hide, backup buddy they don’t expect to sting them! The stinger has a solid, one-piece 3Cr13 stainless steel construction with a 3 7/8”, razor-sharp blade and penetrating point. A non-reflective, black oxide coating and weight-reducing thru-holes make this compact fixed blade perfect for covert missions. The 7 1/8” overall knife snaps securely into a tough injection molded nylon sheath with a removable boot clip.
Details:
Total length: 18.1 cm
Blade length: 9,8 cm
Blade material: 2Cr13 stainless steel
The light Warbolts are ideal for 35 and 55 lb, but are also suitable for up to 90 lb thanks to their high weight. They have a carbon shaft, a hardened tool steel point glued into the shaft, and a high quality polymer nock.Attention: Be sure to comply with the hunting laws in your country or state! Crossbow hunting is highly restricted in Europe!Just like our Hunting Arrows, our Warbolts are fitted with a blade. But unlike our Hunting Arrows, these tips are based on historical arrow point designs. The designation “warbolt” comes from the fact that points of exactly this type were used in long-ago wars. They are considerably more robust than Hunting Arrows and offer much better penetration through hard materials (for example metal armor in a historical context) than the less robust Hunting Arrows thanks to the heavy forged and hardened point. This means that the arrows can be reused more times, and that they are not as susceptible to damage. At the same time, the cutting edges on these arrows are not nearly as sharp as on our Hunting Arrows and also cannot be sharpened to such a fine edge due to the blade geometry. If your primary concern is having robust arrows, then our Warbolts are your best choice.Attention: These arrows, despite having cutting edges that are not as sharp, cut with ease through leather, hide, and tissue and cause heavy bleeding. A single hit with such an arrow can easily cause mortal wounds, so extreme caution must be exercised when using them.
Details:
Light Warbolts for the AR-6 Stinger II and I
Dimensions: 6.2 x 162 mm
Weight: 11.3 g / 174 grains
Broadheads with razor sharp blades – Set of 3 pcs.Suited for the AR-6 Stinger – the shaft is read anodized. This allows great distuingishability inside of the magazine.Balance and center of gravity are optimized for an excellent trajectory. Thus we are using a heavy stainless steel tip as well as a completely hollow shaft. This tip was formed to fit perfectly into the magazine of the AR-6 series.
Arrow weight: 10,25 g / 157 grains
Cutting diameter: 16mm
The blade is made from stainless steel and has a thickness of 1 mm.
This high quality target is made in Austria by Steambow especially for the Stinger repeating crossbows.On the front there are 9 small targets that are ideal for the AR-6 Stinger. There’s a large target on the reverse. So either side of this target can be used according to personal preference.This mat can be shot at with the field tip arrows, hunting broadheads and Bodkin tipped arrows without any problems.Also, thanks to the high quality of this target, the arrows don’t penetrate too far so as not to damage the vanes and making them easier to pull out.
Weight: 3.2 kg
Dimensions: 50 x 50 x 9 cm
The target is made from 100% recycled plastic.
In this kit you will find a wide range of spare parts for your AR-6 Stinger II to get it ready to shoot again in no time.From various screws to washers and needed tools to replacement fibers, there’s a lot included.
€22.50*
Im Außenlager, Langstreckenversand - in 12-14 Tagen bei Dir zu Hause
This website uses cookies to ensure the best experience possible. More information...