AR-6 Stinger II – Limb HUNTING – 150 lbs

The heavy Warbolts (marked by an additional stainless steel ring) are designed for our limbs with higher draw weights (90 to 150 lb). They have a high-quality aluminum nock and a hybrid carbon/aluminum shaft, meaning there is an aluminum core running inside the carbon shaft. This complex structure offers outstanding flight characteristics and makes the arrows extremely robust. At a weight of 247 grains, these arrows are considerably heavier and strike their target with high momentum. This allows them to carry extreme momentum into the target and to transfer a high degree of energy from the limb. This momentum combined with the sharp blade makes these arrows very effective and extremely dangerous.Attention: Be sure to comply with the hunting laws in your country or state! Crossbow hunting is highly restricted in Europe!Just like our Hunting Arrows, our Warbolts are fitted with a blade. But unlike our Hunting Arrows, these tips are based on historical arrow point designs. The designation “warbolt” comes from the fact that points of exactly this type were used in long-ago wars. They are considerably more robust than Hunting Arrows and offer much better penetration through hard materials (for example metal armor in a historical context) than the less robust Hunting Arrows thanks to the heavy forged and hardened point. This means that the arrows can be reused more times, and that they are not as susceptible to damage. At the same time, the cutting edges on these arrows are not nearly as sharp as on our Hunting Arrows and also cannot be sharpened to such a fine edge due to the blade geometry. If your primary concern is having robust arrows, then our Warbolts are your best choice.Attention: These arrows, despite having cutting edges that are not as sharp, cut with ease through leather, hide, and tissue and cause heavy bleeding. A single hit with such an arrow can easily cause mortal wounds, so extreme caution must be exercised when using them. Details: Heavy Warbolts for the AR-6 Stinger II and I Dimensions: 6.2 x 162 mm Weight: 16 g / 247 grains

Take a glance at our new tuning trigger:Learn how easy it is to install the tuning trigger into your Stinger 2:

The new AR-6 Stinger II is here!The revolution of tactical crossbows:Everything that made the Stinger so popular, now even better.With a completely redesigned base, new limb technology, a fiber optic front sight and an adjustable butt stock.Our new crossbow was specifially designed for the repeating mechanism of the Stinger.The longer Picatinny rail allows a flexible positioning of the vertical foregrip.In combination with the butt stock we elevated the cocking of the Stinger to a new level.The all new fiber optic fron sight also accelerates aiming and eases it.Never before was it possible to shoot 6 arrows this quick and precise!Both the crossbow body as well as the magazine are made from high quality polymer and the whole crossbow stands out as very durable and lightweight.The new limbs are made from both carbon fiber as well as glass fiber and improve the power of the AR-6 Stinger II considerably! Contents: 1 Steambow AR-6 Stinger II Tactical 1 vertical fore grip 1 AR-15 butt stock (incl. commercial spec buffer tube) 6 training arrows 2 strings 1 cocking rope 1 user manual This package does not include a laser sight! The laser is sold seperately in our shop! Unboxing and assembling of the AR-6 Stinger II Tactical: Installing the string on the AR-6 Stinger II: Correct and smooth decocking of the string: Weight: 1,16 kg / 2.6 lbs Length: 55.6-63.2 cm (because of the adjustable butt stock) Height: 21.9 cm (incl. vertical foregrip) Width: 44,5 cm / 17.5 in

High-end target arrows for the AR-6 Stinger. Blue anodized for distinguishability inside the magazine.The arrows are completely made of aluminum and have perfect balance. The tip is riveted and additionally glued into the shaft.The vanes are made from rubber and allow great aerodynamics. The vanes can however fall of when hitting too soft targets. These can then be glued onto the shaft again with model glue (such as “UHU hart”).This pack contains 10 target arrows.ATTENTION: Never use bent arrows in your AR-6 stinger. This can trigger failed shots. Such “dry shots” can damage the string and the limb.

The heavy Bodkin Arrows (marked by an additional stainless-steel ring) are designed for our limbs with higher draw weights (90 to 120 lb). They have a high-quality aluminum nock and a hybrid carbon/aluminum shaft, meaning there is an aluminum core running inside the carbon shaft. This complex structure offers outstanding flight characteristics and makes the arrows extremely robust. At a weight of 228 grains, these arrows are considerably heavier than most pistol crossbow arrows and strike their target with high momentum. They can more easily penetrate hard target materials like metal sheeting or glass.The Bodkin Arrows with the black coding ring have a sharp point made of hardened tool steel and are heavier than our Target Arrows. The higher weight and hardened point give these arrows considerable penetrating ability. Even though they have no blades, these arrows cause considerably more serious wounds than Target Arrows. That and the ability of these arrows to penetrate targets particularly well makes them especially dangerous. This means that extreme care must be exercised when using bodkin arrows, and better target media are needed. Note that the sharp edges on these arrow points actually cut the target medium, and that Bodkin Arrows thus wear targets out significantly faster than our Target Arrows. Because of this, we do not recommend these arrows for regular practice. Details: Heavy Bodkin Arrows for the AR-6 Stinger II and I Dimensions: 6.2 x 162 mm Weight: 14.8 g / 228 grains

Lightweight & robust The M10 is made from a high-strength polymer with an extremely high proportion of glass fibers. Thanks to this very stable and lightweight material, our M10 is incredibly easy to handle and can be used at lightning speed. The low overall weight also has a positive effect when transporting the crossbow. The crossbow can be dismantled for transportation and can be made ready for use in just a few seconds. Fast & precise Its lightning-fast target acquisition, high precision and extreme reliability make it an excellent choice for all demanding applications, be it personal protection, dynamic shooting or hunting. Thanks to the quick-release system, the M10 can be reloaded in a fraction of a second, allowing experienced shooters to achieve an impressive rate of fire. The rear sight of the M10 has a highly visible illuminated front sight. The point of impact can be easily selected using different rear sights. The buttstock with height-adjustable cheek rest is adjustable in length in several positions. Maximum firepower 10 arrows fit into each of the removable magazines. All types of 6.2 x 162 mm arrows can be loaded, e.g. hunting arrows, bodkin arrows or sporting arrows. The magazines are approximately the size of STANAG magazines (e.g. for an AR-15/M-4) and can be easily transported in most magazine pouches. Safety & practicality Another new feature is the manual safety, which deactivates the crossbow completely when required and can be operated with both hands. A total of 4 Picatinny rails allow the mounting of accessories such as weapon lights, laser sights and much more. Multiple QD attachment points allow a rifle sling to be attached and detached quickly. AR-Series – Transport case M10 The M10 transport case offers enough space for your M10 Tactical with folding stock adapter, two additional magazines, a limb with quick-detach block and a few accessories such as spare string, lubricant and the like. The inlay is water jet-cut and thus precisely adapted to the above-mentioned configuration. Note: The contents of the case shown in the photos are not part of this product! AR-Series – M10 magazine Interchangeable magazine for M10 Upper It is easy to quickly exchange the magazines (left and right-handed operation possible) and each of them has capacity of 10 bolts. As those magazines fit into standard mag-pouches for AR-15/M-4 rifles it is comfortable to carry spare magazines. And of course, all our AR-Series arrows fit into these magazines, regardless if they are target arrows or deadly broadheads. The benefit of detachable magazines is not only the quick reload, but that it is now very easy to quickly exchange the arrow type. This allows you to adapt to any situation. E.g. if you store your crossbow after a target session, you can still very quickly get it ready for a defensive application by loading a magazine filled with hunting arrows. And with razor sharp broadheads those closed magazine offer another advantage: the dangerous tips are enclosed and it is now much less likely to hurt yourself. Especially our AR-6 speedloader needs some care when using them with razor sharp tips and under stress. So you are not only much quicker with a reload but also much safer. AR-Series – Aluminum target arrows High-end target arrows for the AR-6 Stinger. Blue anodized for distinguishability inside the magazine. The arrows are completely made of aluminum and have perfect balance. The tip is riveted and additionally glued into the shaft. The vanes are made from rubber and allow great aerodynamics. The vanes can however fall of when hitting too soft targets. These can then be glued onto the shaft again with model glue (such as “UHU hart”). This pack contains 10 target arrows. ATTENTION: Never use bent arrows in your AR-6 stinger. This can trigger failed shots. Such “dry shots” can damage the string and the limb. Caution: These arrows penetrate leather, skin, and tissue with ease, causing severely bleeding wounds, even if the tips are less sharp than the blades of our war or hunting arrows. A single hit with such an arrow can easily cause life-threatening injuries, so special care must be taken when handling these arrows. AR-Series – folding stock adapter Adapter to make the buttstock of the AR-6 Stinger II foldable.

The Midnight Forge Boshin Wakizashi is part of a Honshu special edition series that takes the popular sword to a new level of modern and sleek design with tactical engineering and perfect blade-to-hilt balancing. The wakizashi has a 22 1/2”, black 1060 high carbon steel blade, making it unrivaled in sharpness and strength. Trading traditional trappings for sleek contemporary style, the cutting edge Boshin is an undeniably modern weapon. Textured TPR shrouds the handle for an ergonomic no-slip grip and the handle is crowned with an oversized grey tini-finished steel pommel. The guard snubs fanciful ornamentation in favor of a practical pointed ellipse design. In keeping with the Boshin wakizashi’s clean, functional motif, the scabbard is wooden with a semi-gloss black finish and features black faux leather wrapping and cotton cord. Wielding the Honshu Boshin Midnight Forge Wakizashi is almost Zen-like - you just have to experience it for yourself! Details: Blade length: 57 cm Blade material: 1060 high carbon steel Total length: 86 cm