Taschenmesser FKMD Dart

The Sword Maintenance Kit comes in a lightweight wooden storage box and includes all the essential tools needed for regular blade maintenance. The Uchiko powder ball contains fine polishing powder and is gently tapped along the blade to loosen old oil and surface impurities. The residue is then removed with the included soft microfiber cloth. Finally, apply a thin layer of clove oil to protect the blade against rust and corrosion. Regular maintenance helps prevent fingerprints, moisture damage, and other stains that can permanently affect the blade's finish. This maintenance kit is an essential accessory for collectors, Iaido practitioners, and sword enthusiasts alike. Clove Oil (Tsubaki or Clove Oil) The oil protects the blade from rust by forming a thin protective barrier against humidity and moisture in the air. As the protective film gradually evaporates over time, it is recommended to reapply the oil at least once a month. Uchiko Powder Ball The Uchiko powder ball contains fine polishing powder. By gently tapping both sides of the blade, it loosens old oil, fingerprints, and fine contaminants. When used together with the microfiber cloth, it helps restore a clean and polished blade surface. Microfiber Cloth The soft microfiber cloth is used to remove the Uchiko powder, oil residue, fingerprints, and other contaminants from the blade. It is also ideal for applying a thin, even coat of maintenance oil across the entire blade. Brass Mekugi Remover (Mekuginuki) The brass Mekuginuki is used to remove the bamboo retaining pins (Mekugi) from the sword handle, allowing the sword to be safely disassembled for maintenance. The brass hammer head can be unscrewed from the handle for use. Sword Maintenance InstructionsClean and maintain your sword after every use, whether it has been used for Iaido practice, Tameshigiri, or is simply displayed as part of your collection. 1. Remove Old Oil Use the microfiber cloth to wipe the blade thoroughly from the tip toward the handle, removing old oil and light surface contamination. 2. Apply Uchiko Powder Gently tap both sides of the blade with the Uchiko powder ball. The fine polishing powder helps lift old oil and dirt from the blade's surface. 3. Wipe the Blade Clean Carefully wipe away all Uchiko powder using the microfiber cloth. Repeat the process if necessary until the blade is completely clean. 4. Apply Fresh Oil Apply a small amount of clove oil to the microfiber cloth and spread it evenly over both sides of the blade, working from the tip toward the handle. Only a very thin protective film should remain on the blade. 5. Regular Maintenance Every 3–4 months, it is recommended to disassemble the sword and clean the tang (Nakago) in the same manner before applying a light coat of oil.

Made from stained wood. Details: Height: approx. 12 cm Width: approx. 28 cm Material: Stained wood

FOX KNIVES MILITARY DIVISION (FKDM) is a special division of Fox Knives, founded in 2005. The product program focuses on fielding tools for the special needs of police, military and ambulance corps. Since foundation FKMD is official NATO supplier and tight-knit with elite associations worldwide. The knives of the FKMD series are conceived for highest resilience, reliability and action safety. FKMD use premium materials like N690Co Steel, G-10, Airplane Aluminium, Titan, Carbon Fiber or Forprene solely. The N690Co blades are for highest performance hardened to 59-60 HRC.Rescue Diving RettungsmesserThanks to the big handle opening the knife can be pulled with one or two fingers comfortable to cap a belt, net or cord with a pulling cut. The light weight plastic sheath keeps the knife always handy. With AISI 301 Special steel with high corrosion resistance especially made for the maritime fielding. The signal color handle and sheath make it easy to find. Details:Weight: 55 gOverall Length: 14 cm Blade Material: AISI 301 Special steel

Taking inspiration from Thai swords in his personal collection and from his extensive training in the Thai Martial Arts, Lynn Thompson began exploring his own interpretation of a Thai sword in Cold Steels Machete format. Lynn has been an active practitioner of Thai Martial Arts since the early 1980s. Studying Thai Boxing with Bill Berg and the late Ernie Franco before exploring Muay Thai and Krabi Krabong in greater depth with his current training partner and instructor of over 13 years, Ron Balicki. The Thai Machete represents the culmination of over 4 years of development and refinement. Like the Thai swords that inspired it, the Machete is beautifully balanced, with a keen cutting edge and sharp tip. Though most commonly seen used in pairs when practicing traditional Thai fighting arts, these long curved blades are amazingly versatile. Light enough to swing one handed, but with a long enough handle to employ a two handed grip for extra leverage and cutting power. The Thai Machetes wide blade and curved cutting edge make it an excellent brush cutter. It slices grass, vines and light foliage with ease. Its fully sharpened blade is made from the same tough 1055 Carbon Steel as the other classic blades in Cold Steels incredibly popular Machete line up. Its tough, traditional looking polypropylene handle has a flattened oval grip that won’t twist or turn in your hand, while its steel reinforced guard offers surprisingly good hand protection. Details: Overall Length: approx. 92.7 cm Blade Length: approx. 55.9 cm Blade Thickness: approx. 0.3 cm Handle Length: approx. 36.8 cm Blade Material: 1055 Carbon with baked-on Anti Matte Finish Handle Material: Polypropylene Weight: approx. 833.5 g Sheath: Cor-Ex™ Sheath This is an item from the Cold Steel program in 2014.